2020 FORD EXPLORER Back Over Prevention Problems

The contact owns a 2020 Ford Explorer. The contact stated that the vehicle was recently repaired under NHTSA Campaign Number: 25V159000 (Back Over Prevention); however, the vehicle experienced a failure with the back over prevention system. The contact stated that the image on the screen was occasionally blue, or the image was frozen. The contact had taken the vehicle back to the same dealer and was informed there would be a charge for a diagnostic test and the repair. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 65,000.

The contact owns a 2020 Ford Explorer. The contact stated that while operating the vehicle, the touchscreen monitor and backup camera display were extremely hot to the touch. The cause of the failure was not yet determined. The manufacturer was notified of the failure, but no assistance was offered. The local dealer was not contacted. The failure mileage was 104,009.

The contact owns a 2020 Ford Explorer. The contact stated that the vehicle was repaired under Ford Recall: 23S23/NHTSA Campaign Number: 23V342000 (Back Over Prevention); related to the Camera Blue Screen however, the repair failed to prevent the failure from occurring. The contact stated that approximately 3 years after the recall repair was completed, the digital screen failed to display the rearview image as intended and would reset once the rear door was opened and closed. The vehicle was taken back to the same local dealer and the contact was informed that the failure was not related to the recall repair and that a software update was needed. The vehicle was repaired out of pocket. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 35,000.

The contact owns a 2020 Ford Explorer. The contact stated that the back over prevention camera screen was black intermittently. The contact then received notification of NHTSA Campaign Number: 23V342000 (Back Over Prevention) and the vehicle was repaired; however, the failure persisted. The vehicle was returned to the dealer but was not diagnosed. The vehicle was not repaired. The manufacturer was made aware of the failure and opened a case. The manufacturer referred the contact to NHTSA Hotline to report the failure. The failure mileage was 52,700.

The contact owns a 2020 Ford Explorer. The contact stated that while operating the vehicle, the back over prevention camera malfunctioned and failed to display an image while the vehicle was in reverse(R). The cause of the failure was not yet determined. The local dealer and manufacturer were notified of the failure, but no assistance was offered. The contact stated that the vehicle had previously been repaired under NHTSA Campaign Number: 23V305000 (Back Over Prevention) for the failure. The failure mileage was 52,000.

The contact owns a 2020 Ford Explorer. The contact stated that while driving at various speeds, the vehicle hesitated while accelerating, and the message "Power Train Malfunction" was displayed. The vehicle was taken to the local dealer who diagnosed that the transmission was faulty and needed to be replaced. The vehicle was not repaired. Additionally, while operating the vehicle, the back-over prevention camera display screen failed to display an image, causing a visibility hazard for the driver. The camera was replaced on several occasions, but the failure persisted. The manufacturer was notified of the failure. The failure mileage was 9,000.

The contact owns a 2020 Ford Explorer. The contact stated that while in reverse, the camera screen went blank. There were no warning lights illuminated. The contact received notification of NHTSA Campaign Number: 23V342000 (Back Over Prevention). However, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 40,000. Parts distribution disconnect.

The contact owns a 2020 Ford Explorer. The contact received notification of NHTSA Campaign Number: 23V342000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that the camera showed a blue screen when the vehicle was shifted into reverse. The contact stated that the failure was intermittent. The failure mileage was approximately 29,000. Parts distribution disconnect.

The contact owns a 2020 Ford Explorer. The contact stated while reversing, the rearview camera image turned black or blue. A message indicating that the rearview camera was inoperable was displayed. The contact stated that the vehicle was taken to the dealer, where an unknown software update was performed several times; however, the failure persisted. The contact received notification of NHTSA Campaign Number: 23V342000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted and referred the contact to the manufacturer. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure and referred the contact to the dealer for assistance. The failure mileage was approximately 16,000. VIN tool confirms parts not available.

The contact owns a 2020 Ford Explorer. The contact received notification of NHTSA Campaign Number: 23V342000 (Back Over Prevention). The contact stated that while the vehicle was in reverse(R), the rear-view camera screen was blue. The vehicle was taken to a dealer where it was diagnosed that the rear-view camera needed to be replaced. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was 5,000.

The contact owns a 2020 Ford Explorer. The contact received notification of NHTSA Campaign Number: 23V342000 (Back Over Prevention) and 23V675000 (Power Train) however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2020 Ford Explorer. The contact received notification of NHTSA Campaign Number: 21V735000 (Back Over Prevention) however, the part to do the recall repair was unavailable. The vehicle was taken to a dealer where it was diagnosed that the rear-view camera needed to be replaced. The vehicle was not repaired. The contact stated that the manufacture had exceeded a reasonable amount of time for the recall repair. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 20,000.

The contact owns a 2020 Ford Explorer. The contact received notification of NHTSA Campaign Number: 23V342000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed the parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the camera became inoperable with the display screen going black. The vehicle had not been diagnosed or repaired. The failure mileage was unknown. VIN tool confirms parts not available.

The contact owns a 2020 Ford Explorer. The contact stated that while reversing at an undisclosed speed, the back over prevention camera displayed a black screen. The contact stated that the vehicle was taken to the dealer to be diagnosed. The contact was informed that the back over prevention camera needed to be replaced; however, the parts were not available. The contact stated that she had received notification of NHTSA Campaign Number: 23V342000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact later received a notification that referenced a temporary fix; however, when the vehicle was taken to the dealer, the contact was informed that there was no temporary fix available. The vehicle was not repaired. The manufacturer was made aware of the failure. VIN tool confirms parts not available.

The contact's wife owns a 2020 Ford Explorer. The contact stated that the rear-view camera was displaying a blue image on the screen while in reverse(R). The contact had taken the vehicle to a dealer and was initially informed that there would be a recall to address the failure. The contact then received notification of NHTSA Campaign Number: 23V342000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The vehicle had been taken to several dealers where repairs were made to the rear-view camera; however, the failure persisted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 500. VIN tool confirms parts not available.

The contact owns a 2020 Ford Explorer. The contact initially received notification of NHTSA Campaign Number: 23V022000 (Back Over Prevention). The contact took the vehicle to the dealer where the recall was performed. Once the vehicle was returned, the contact stated that the lane assist, the forward collision assist, and several other electrical features failed to operate as needed. The vehicle was taken back to the dealer however, the mechanic was unable to correct the failure. The manufacturer was notified of the failure and a complaint was filed. The contact was then transferred to the NHTSA Hotline for further assistance. The vehicle was not repaired. The failure mileage was approximately 42,000. The contact states that none of the accident prevention features are working. After two months, the manufacturer still has not provided a remedy and no parts are available.

The contact owns a 2020 Ford Explorer. The contact received notification of NHTSA Campaign Number: 23V022000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the rearview camera image turned black, blue or gray while reversing. The contact stated that the failure occurred increasingly. The messages "Reverse Brake Assist Not Available - See Owner’s Manual” and "Park Aid Fault" were displayed. The local dealer was not contacted. The vehicle was not diagnosed nor repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 58,000. VIN tool confirms parts not available.

The contact owns a 2020 Ford Explorer. The contact stated that there was a blue image on the rearview camera screen and a black image on the side-view cameras. The contact then received notification of NHTSA Campaign Number: 23V022000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 8,000. VIN tool confirms parts not available.

The contact owns a 2020 Ford Explorer. The contact received notification of NHTSA Campaign Number: 23V022000 (Back Over Prevention) however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had experienced the failure. The failure mileage was unknown. VIN tool confirms parts not available.

The contact owns a 2020 Ford Escape. The contact received notification of NHTSA Campaign Number: 23V022000 (Back Over Prevention). The vehicle was taken to the dealer where the recall repair was performed; however, the contact stated that while shifted into reverse, the rear-view camera failed, and the screen display was blue. The vehicle was taken to the dealer where the contact was informed that the vehicle was previously repaired under 21V735000 (Back Over Prevention) and needed to be repaired again. The manufacturer was not notified of the failure. The failure mileage was approximately 100,000.

The contact owns a 2020 Ford Explorer. The contact stated that while operating the vehicle, the back over prevention camera malfunctioned and intermittently displayed a blue screen. Additionally, while driving, the display screen would erroneously activate and cause the steering wheel to momentarily vibrate and shake. The vehicle was taken to the local dealer who performed a software update which corrected the failure; however, after a second software update was performed, the failure reoccurred. The manufacturer was notified of the failure, but no assistance was offered. The failure mileage was 37,000.

The contact owns a 2020 Ford Explorer. The contact stated that the rearview camera image was distorted. The contact related the failure to NHTSA Campaign Number: 23V022000 (Back Over Prevention). The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure. The failure mileage was approximately 40,000.

The contact owns a 2020 Ford Explorer. The contact stated upon starting the vehicle, a message indicating that the 360-degree camera was inoperable was displayed. The contact stated that the failure persisted while reversing. The contact also stated that the Blind Spot Information System (BLIS) that activated an indicator light in the side view mirrors when a vehicle was detected in the blind spot was malfunctioning as the sideview mirror indicator light failed to illuminate as needed. The vehicle was taken to the dealer, where the failure could not be duplicated; however, the failure persisted. The contact stated that the failure mostly occurred during cold weather. The contact received notification of NHTSA Campaign Number: 23V022000 (Back Over Prevention); however, the parts to do the recall repair were not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the...

The contact owns a 2020 Ford Explorer. The contact stated that while reversing, the rear-view camera displayed a distorted image. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure. The contact related the failure to NHTSA Campaign Number: 23V022000 (Back Over Prevention) however, the VIN was not included in the recall. The failure mileage was approximately 17,700.

The contact owns a 2020 Ford Explorer. The contact stated while reversing, the back-up camera image turned blue. There was no warning light illuminated. The contact stated that the failure occurred intermittently. The contact stated that the vehicle was taken to the dealer where it was repaired under NHTSA Campaign Number: 21V735000 (Back Over Prevention) however, the failure reoccurred a week later. The vehicle was taken back to the dealer where it was diagnosed that the back-up camera failed and needed to be replaced; however, the recall repair did not include a back-up camera replacement. The contact stated that the recall remedy failed to repair the failure. The manufacturer was notified of the failure and informed the contact that they could not assist as the VIN was not currently under recall. The vehicle was not repaired. The failure mileage was approximately 29,000.

The contact owns a 2020 Ford Explorer. The contact stated that the back-up camera intermittently displayed a blue screen while in use. The contact had taken the vehicle to the dealer on numerous occasions where software was used to clear the fault codes; however, the failure would return soon after the update. The manufacturer had been notified of the failure and informed him that his vehicle was not included in NHTSA Campaign Number: 21V735000 (Back Over Protection). The vehicle was not repaired. The failure mileage was approximately 1,000.

The contact owns a 2020 Ford Explorer. The contact stated while shifting into reverse the Back Over Prevention screen failed to operate as designed. Additionally, the vehicle would respond without the accelerator pedal being depressed. The contact also stated that while driving 35 MPH, the Forward Collision Avoidance warning system activated while there was no vehicle nearby. The contact stated that the vehicle was sputtering. There were no warning lights illuminated. The vehicle was taken to the dealer and the technician informed the contact that the brake assist was unavailable. The technician was unable to duplicate the failure with the Forward Collision Avoidance system. The vehicle was currently being repaired. The manufacturer was notified of the failure. The approximate failure mileage was 4,000.

The contact owns a 2020 Ford Explorer. The contact stated when the vehicle was shifted into reverse, there was no image displayed on the screen. The vehicle was taken to the dealer where the contact was informed that there was a recall for the failure. The contact stated a programming update was needed and was performed; however, the failure continued. The vehicle was taken back to the dealer where an update was completed several times; however, the failure persisted. The contact stated that the vehicle had been to the dealer at least 7 times to update the software. The manufacturer was notified of the issue and advised to go back to the dealer and a case was opened. The vehicle was taken back to the dealer for a 9-hour update. The contact stated that the dealer called and stated that the vehicle was out of warranty and the contact would...

The contact owns a 2020 Ford Explorer. The contact stated that while reversing, the rearview camera inadvertently turned blue. There were no warnings lights were illuminated. The contact received a recall notification for NHTSA Campaign Number: 21V735000 (Back Over Prevention) and the vehicle was taken to the dealer who updated the Image Processing Module software; however, the failure reoccurred 1-2 weeks later. The vehicle was taken back to the dealer who advised the contact that the rearview camera needed to be replaced and the repair would be completed at her own expense. The manufacturer was notified of the failure and followed up with the dealer. The manufacturer then called back but offered no further assistance. The vehicle was not repaired. The failure mileage was approximately 39,000.

The contact owns a 2020 Ford Explorer. The contact stated that while attempting to reverse the vehicle, the backup camera failed to function as designed. The contact stated that the backup sensor non-functional message was displayed. The vehicle was taken to a local dealer and was diagnosed IPMB updated and repaired. Upon investigation, the contact associated the failure with NHTSA Campaign Number: 21V735000 (Back Over Prevention). The vehicle was repaired under the recall but continued to experience failure. The manufacturer was not informed of the failure. The failure mileage was approximately 10,000.

Ford issued recall 21S44 for an intermittent back-up camera problem. I took my vehicle to Elk Grove Ford (95624) on 10/05/21 for recall repair. The problem continued and I took back on 10/19/21 to fix back-up camera. It still only works intermittently. Today, while backing up at an elementary school after my second recall service, my camera failed again. This is a critical safety issue which Ford knows about but has provided incompetent information to Elk Grove Ford. [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).

Back up camera image distorts goes black at times but goes blue multiple times a day while driving and putting in reverse camera is blue 90% of the time

The contact owns a 2020 Ford Explorer. The contact stated while operating the vehicle the backup camera display image was very washed out, unclear and the colors appeared to be bleached out causing visibility issues for the driver. The vehicle was taken to the local dealer who replaced the camera display unit, but the failure persisted. The manufacturer was also notified of the failure. The failure mileage was 2,000.

Backup camera failed with a blue screen that was initially identified early August and brought into Ford 8/11-13 but dealership unable to reproduce problem. It is believed that the dealership re-booted the computer and downloaded new software. The same problem occurred just two days after we got the car back on 8/15 at which time a picture was taken to show the service department. A Google search suggested there was a problem with the back up camera for 2020 Explorer, but there was no recall on my VIN. After reaching out to Ford soon after we got the car back, a service person offered to order a new camera, but it was never approved. Numerous calls were placed to the dealership given ongoing camera failure and concern for causing an accident, but we were told that the problem needed to be reproduced. The camera could not be ordered. While backing...

I had an issue with the rearview backupcamera. The camera kept going out multiple times. I asked Fodd customer care if there was a recall and told me no. One day I was backing up at night my camera went out and I hit a mailbox which was in my blindspot I immediately called Ford to alert them that the camera went out a d I damaged my vehicle. Ford requested that I bring in my truck and changed the camera. They found out the camera had an electrical shortage. I attempted to get Forx to pay for the damages to my vehicle and they refused. The total estimate was 2700.00. The response why they denied my claim was I had an accident and they were not responsible regardless of the camera not working. They told me to contact my insurance to fix the damage. I feel I wouldn't have...

The contact owns a 2020 Ford Explorer. The contact stated while attempting to reverse the backup camera failed to engage. The contact stated that there was no warning light illuminated. The vehicle was taken to a local dealer where it was diagnosed with needing the Intelligent Platform Management Bus (IPMB) flashed. The vehicle was repaired. Upon investigation, the contact associated the failure with NHTSA Campaign Number: 21V735000 (Back Over Prevention). The vehicle was repaired but continued to experience the same symptoms. The manufacturer was informed of the failure and spoke with the contact’s attorneys and was awaiting a response. The failure mileage was approximately 22,900. Consumer stated camera was replaced 4 times and reprogrammed twice.

Rear view camera not working. Dealer has confirmed however not able to get replacement part from manufacturer. Camera has been down for over 9 months.

The contact owns a 2020 Ford Explorer. The contact stated while reversing the vehicle, the back over protection screen turned blue and the contact was unable to see the road. The contact stated that the reverse brake assist warning light was illuminated. The contact took the vehicle to the local dealer ten times within 11 months, but the mechanic was unable to diagnose the cause of the failure. The vehicle was not repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 5,100.

TL* THE CONTACT OWNS A 2020 FORD EXPLORER. THE CONTACT STATED THAT UPON PURCHASE OF THE VEHICLE, THE REARVIEW CAMERA WOULD LOSE STREAM UPON USE AS THE REVERSE BRAKE ASSIST NOT AVAILABLE; SEE MANUAL WARNING MESSAGE WOULD ILLUMINATE ON THE INSTRUMENT PANEL. THE CONTACT SPOKE WITH TOMBALL FORD (22702 TX-249, TOMBALL, TX 77375) WHERE HE WAS INFORMED THAT THEY WERE UNAWARE OF ANY ISSUES WITH THE REARVIEW CAMERA HOWEVER, UPON INVESTIGATION, THE CONTACT DISCOVERED NHTSA CAMPAIGN NUMBER: 20V575000 (VISIBILITY) WHICH HE LINKED TO THE FAILURE. THE DEALER OFFERED TO REPAIR THE FAILURE HOWEVER, DECLINED TO REPAIR THE PART FOR FREE. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE AND OFFERED NO ASSISTANCE. THE VEHICLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS APPROXIMATELY 20.

ALL CAMERAS INTERMITTENTLY NOT FUNCTIONING. DEALER REPLACED CAMERA MODULE. REAR CAMERA STILL NOT FUNCTIONING. SAID CURRENT RECALL FOR REAR CAMERA DOES NOT APPLY BECAUSE MY VEHICLE MANUFACTURER DATE IS OUT OF RANGE FOR RECALL. DEALER BLAMING REAR CAMERA NOT WORKING ON FORD ACCESSORY DASH CAMERA.