2013 FORD EDGE Back Over Prevention Problems

The contact owns a 2013 Ford Edge. The contact stated that while reversing, the rear-view camera displayed an upside-down and fuzzy image. The vehicle was taken to an independent mechanic, where it was diagnosed with a failed rear-view camera system. The contact was informed that the rear-view camera system needed to be replaced. The vehicle was not repaired. The contact referenced an unknown recall; however, the VIN was not under recall. The contact owns another Ford vehicle that experienced a similar failure, and the vehicle was included in the recall. The contact was informed by the independent mechanic to wait for a recall notification for the vehicle. The manufacturer was not made aware of the failure. The failure mileage was approximately 100,000.

The contact owns a 2013 Ford Edge. The contact stated that while reversing, the rear-view camera displayed a blurry upside-down image. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact referenced an unknown recall which had a similar failure description; however, the VIN was not included. The manufacturer was not made aware of the failure. The failure mileage was unknown.

The contact owns a 2013 Ford Edge. The contact stated while attempting to start the vehicle, the rearview camera displayed a blank screen and was glitching. A dealer was contacted. The vehicle taken to the dealer where it was diagnosed and determined that the rearview camera needed to be replaced. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 25V572000 (BACK OVER PREVENTION); however, the VIN was not included in the recall. The manufacturer was notified of the failure and informed the contact that the VIN was not included in the recall. The failure mileage was 108,000.

The contact owns a 2013 Ford Edge. The contact stated that while attempting to start the vehicle, the contact became aware that the rearview camera displayed a blank screen or an upside-down image. An independent mechanic was contacted. The vehicle was not taken to a dealer or an independent mechanic to be diagnosed. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 25V270000 (BACK OVER PREVENTION); however, the VIN or the model year was not included in the recall. The manufacturer was not notified of the failure. The failure mileage was approximately 193,000.

The contact owns a 2013 Ford Edge. The contact stated that while attempting to reverse, the back over prevention camera malfunction and failed to display an image. There was no warning light illuminated. The vehicle was taken to a local auto body shop where it was diagnosed, and the contact was informed that the camera was faulty and needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 60,953.

The contact owns a 2013 Ford Edge. The contact stated that while shifted into reverse(R), the camera image on the front display screen was black and the message "Contact Dealer" was displayed. The contact stated that the image was constantly black, and the camera or the display had stopped functioning. The contact researched online and related the failure to NHTSA Campaign Number: 25V442000 (Back Over Prevention); however, the VIN was not included in the recall. The contact notified the manufacturer and was informed that the VIN was not included in the recall. The manufacturer referred the contact to the NHTSA Hotline. The failure mileage was approximately 122,000.

The contact owns a 2013 Ford Edge. The contact stated while in reverse(R), the rearview camera displayed a blank image. Additionally, the contact also stated that upon shifting to drive(D), the rearview camera remained activated temporarily. The vehicle was taken to the dealer, where the contact was informed that the VIN was not included in a recall, and the contact was provided an estimated fee for the repair. The contact declined to pay for the repair. The vehicle was not repaired. The manufacturer was notified of the failure and a case was filed. The contact was then referred to the NHTSA Hotline to file a vehicle safety complaint. The failure mileage was approximately 63,000.

The contact owns a 2013 Ford Edge. The contact stated that while reversing, the rearview camera image was black. The contact stated that the failure was intermittent. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact related the failure to an unknown recall; however, the VIN was not included in the recall. The manufacturer was made aware of the failure, but no assistance was provided. The contact was advised to contact the NHTSA Hotline to report the safety failure. The failure mileage was approximately 159,000

The contact owns a 2013 Ford Edge. The contact stated that while reversing, the rearview camera image was black and the message "Camera Not Available" was displayed. Additionally, the contact stated that the vehicle had failed to accelerate as needed while depressing the accelerator pedal. The vehicle was taken to the local independent mechanic who was unable to determine the cause of the failure. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was 195,000.

The contact owns a 2013 Ford Edge. The contact stated that the backup prevention camera occasionally went blank while attempting to reverse, and operated as designed occasionally. The message “Camera Unavailable” was displayed. The vehicle was taken to an independent mechanic who was unable to duplicate the failure. The contact called the local dealer and was referred to the Ford Recall center for assistance. The vehicle was not diagnosed or repaired. The manufacturer was contacted and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 50,000.

The contact owns a 2013 Ford Edge. The contact stated that while reversing, the rearview camera image was distorted or blue. The message "Rearview Camera Unavailable" was intermittently displayed. The vehicle was taken to the dealer, where it was diagnosed and determined that the rearview camera had failed and needed to be replaced. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 35,000.

The contact owns a 2013 Ford Edge. The contact stated while reversing, the back over prevention camera failed to function as intended with the back over prevention warning light illuminated. The contact stated that the back over prevention camera displayed a green screen. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The dealer was made aware of the failure but provided no assistance. The manufacturer was not made aware of the failure. The contact referenced an unknown recall; however, the VIN was not included in the recall. The failure mileage was approximately 139,000.

The contact owns a 2013 Ford Edge. The contact stated that upon attempting to reverse out of the driveway, the back over prevention rear view camera display failed to function properly. The contact stated that the image displayed was upside down. There was no warning light illuminated. The vehicle was taken to a local dealer; however, the vehicle was not diagnosed. The contact was informed that the VIN was not under recall for the failure. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 148,500.

The contact owns a 2013 Ford Edge. The contact stated that while reversing, the back over prevention camera failed to function as intended. The contact stated that the back over prevention camera image was delayed and then became frozen. The vehicle was taken to an independent mechanic, where it was diagnosed with a software failure. The contact was advised to take the vehicle to the dealer for assistance. The dealer was made aware of the failure. The manufacturer was made aware of the failure. The contact was informed that the repair was not covered under recall or warranty. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 100,000.

The contact owns a 2013 Ford Edge. The contact stated that upon attempting to reverse out of the driveway, the rear-view camera image displayed on the center console was upside down. There was no warning light illuminated. The local dealer was contacted; however, the vehicle was not diagnosed. The contact was informed that the VIN was not under recall. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 140,000.

The contact owns a 2013 Ford Edge. The contact stated that while attempting to reverse, the back-over prevention camera failed to operate as needed. The contact stated that she had a brain tumor, and it was difficult to use the side-view mirrors while reversing. The vehicle was taken to a dealer and the contact was informed that she would have to pay for a diagnostic test. The vehicle was not repaired. The vehicle was then taken to an independent mechanic where it was diagnosed with shifting mechanism failure. The vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was unavailable.

The contact owns a 2013 Ford Edge. The contact stated that while reversing, the rearview camera displayed a distorted image. The contact stated that the rearview camera had previously been replaced in 2020 under warranty. The vehicle was taken to the dealer; however, the vehicle was not diagnosed or repaired. The dealer informed the contact that there was no recall associated with the VIN and referred her to the manufacturer for assistance. The manufacturer was made aware of the failure and a case was opened. The contact was advised to file a complaint with the NHTSA Hotline. The contact related the failure to NHTSA Campaign Number: 20V575000 (Visibility); however, the VIN was not included in the recall. The failure mileage was approximately 135,000.

The contact owns a 2013 Ford Edge. The contact stated that while the vehicle was shifted into reverse, the back over prevention camera image was displayed upside down. The vehicle was taken to an independent mechanic and the contact was informed that the vehicle should be taken to the dealer to be serviced. The dealer was not contacted. The manufacturer was contacted and referred the contact to the NHTSA Hotline for assistance. The approximate failure mileage was 120,000.

The contact owns a 2013 Ford Edge. The contact stated while reversing, the rearview camera display displayed an upside-down image. The contact stated that the vehicle then returned to normal functionality; however, the failure had become a regular occurrence. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The manufacturer was notified of the failure but referred the contact to the NHTSA Hotline for assistance. The failure mileage was 50,000.

The contact owns a 2013 Ford Edge. The contact stated that while operating the vehicle in reverse, the backup camera sometimes became inoperable and would not display an image. The vehicle was taken the local dealer who diagnosed that the camera was faulty and needed to be replaced. The vehicle was not repaired. The contact was notified of the failure, but no assistance was offered. The failure mileage was 55,000.

The contact owns a 2013 Ford Edge. The contact stated that on various occasions while reversing, the rearview camera intermittently failed to display. The contact then stated that the failure recurred while reversing and the rearview image was distorted and then a "Camera Unavailable, Please Contact Your Dealer" message was displayed. The vehicle was taken to an independent mechanic, who made the contact aware of a rearview camera extended warranty; however, the VIN was not included, and the vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure and informed the contact that the VIN was not included in a rearview camera class action lawsuit, and advised her to file a complaint with the NHTSA hotline. The approximate failure mileage was 60,000.

The contact owns a 2013 Ford Edge. The contact stated that when she placed the vehicle in reverse(R) and reversing at approximately 2 MPH, the Back Over Prevention camera image was distorted. The failure had become constant. The contact stated no warning light was illuminated. The contact had not taken the vehicle to a local dealer. The vehicle was not diagnosed or repaired. The manufacturer had not been informed of the failure. The contact researched the failure online and related the failure NHTSA Campaign Number: 22V082000 (Back Over Prevention) and was aware that her vehicle was not included in the recall. The failure mileage was approximately 105,000.

TL* THE CONTACT OWNS A 2013 FORD EDGE. THE CONTACT STATED THAT WHILE THE VEHICLE WAS IN REVERSE, THE IMAGE DISPLAYED ON THE BACK OVER PREVENTION SCREEN WAS UPSIDE DOWN. THE CONTACT HAD NOT CONTACTED A DEALER. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE. THE VEHICLE WAS NOT REPAIRED. THE APPROXIMATE FAILURE MILEAGE WAS 71,000.