2015 JEEP CHEROKEE — Problems, Recalls & Safety Data

After learning of the recall for the lift gate module because of water intrusions of multiple points. The wiring harness to the lift gate module was serverly corroded and had to be replaced. The original fix, without the corrosion on the harness, was the place a piece of plastic over the module. That recall and fix did nothing to address the issues of multiple points of water intrusions. From body seems, the seal around the hatch, and around the tail light(s). There is more than one harness, and more than one module in the tire well. The multiple water leaks, that can and have affected an electrical component the was deemed as being a potential to start a fire, and none of the others in there are. There needs to be a recall on the water leaks, from their poor design! I have saw first hand how badly the harness they HAD to replace, along with the lift gate module. Because of the very seriousness of the corrosion. Where they not only replaced both of them, but also had to relocate the lift gate module, because of the evidence of the amount on water that has been entering the cargo, and wheel well areas! À 11 year old vehicle, from the information I have read up on, many with this same production years are also having the issues of water intrusions! Hold them responsible, instead of letting them cut corners of just trying to put a umbrella over there recall! I don't have pictures now, or when I took it to the dealership originally for the recall. But I am willing to take pictures, as I'm still in the process of disassembly the interior to try and pin point all the water intrusions! The dealership I took it to for the recall work, said they are "not aware of any water intrusions on this vehicle". That's a big problem!!

After learning of the recall for the lift gate module because of water intrusions of multiple points. The wiring harness to the lift gate module was serverly corroded and had to be replaced. The original fix, without the corrosion on the harness, was the place a piece of plastic over the module. That recall and fix did nothing to address the issues of multiple points of water intrusions. From body seems, the seal around the hatch, and around the tail light(s). There is more than one harness, and more than one module in the tire well. The multiple water leaks, that can and have affected an electrical component the was deemed as being a potential to start a fire, and none of the others in there are. There needs to be a recall on the water leaks, from their poor design! I have saw first hand how badly the harness they HAD to replace, along with the lift gate module. Because of the very seriousness of the corrosion. Where they not only replaced both of them, but also had to relocate the lift gate module, because of the evidence of the amount on water that has been entering the cargo, and wheel well areas! À 11 year old vehicle, from the information I have read up on, many with this same production years are also having the issues of water intrusions! Hold them responsible, instead of letting them cut corners of just trying to put a umbrella over there recall! I don't have pictures now, or when I took it to the dealership originally for the recall. But I am willing to take pictures, as I'm still in the process of disassembly the interior to try and pin point all the water intrusions! The dealership I took it to for the recall work, said they are "not aware of any water intrusions on this vehicle". That's a big problem!!

The contact owns a 2015 Jeep Cherokee. The contact stated that after starting the vehicle, the check engine warning light remained illuminated. The message "4WD Low" was displayed, and there was a grinding sound coming from the front of the vehicle. The vehicle was towed to the local dealer to be diagnosed. The vehicle was diagnosed with PTU failure. The contact was informed that the PTU needed to be replaced; however, the part was on backorder. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 150,000.

The contact owns a 2015 Jeep Cherokee. The contact stated that while in a drive-thru line, the front driver's side window started smoking. The contact disconnected the wiring to the door. The vehicle was taken to O'Reilly, where it was diagnosed with an internal door electrical failure. The contact personally replaced the power window motor. The vehicle was repaired. The contact stated that the vehicle was experiencing hard shifts while driving. The check engine warning light was illuminated. The vehicle was previously taken to O'Reilly’s, where it was diagnosed that the failure was related to the alternator and low battery voltage. The alternator was taken to two technicians for testing, and the contact was informed that the alternator was in good condition. The vehicle was not repaired. Additionally, the contact stated that the ABS warning light was illuminated. The vehicle was recently taken to O'Reilly’s and AutoZone for diagnostic testing and the contact was provided fault codes for EVAP system leak detected, 1,2,3 Active Grille Shutter (AGS), throttle pedal position sensor switch A circuit high, System Voltage below and above Threshold, denied torque request signal, ECU configuration mismatch, ECU vehicle option mismatch, output speed sensor, input speed sensor/Correlation, fan 1 control circuit, throttle pedal position sensor switches D and B circuit low, and DTC U0402-00 for TCM immediate repair. The dealer was notified of the failure. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was approximately 72,000.

The contact owns a 2015 Jeep Cherokee. The contact stated that while in a drive-thru line, the front driver's side window started smoking. The contact disconnected the wiring to the door. The vehicle was taken to O'Reilly, where it was diagnosed with an internal door electrical failure. The contact personally replaced the power window motor. The vehicle was repaired. The contact stated that the vehicle was experiencing hard shifts while driving. The check engine warning light was illuminated. The vehicle was previously taken to O'Reilly’s, where it was diagnosed that the failure was related to the alternator and low battery voltage. The alternator was taken to two technicians for testing, and the contact was informed that the alternator was in good condition. The vehicle was not repaired. Additionally, the contact stated that the ABS warning light was illuminated. The vehicle was recently taken to O'Reilly’s and AutoZone for diagnostic testing and the contact was provided fault codes for EVAP system leak detected, 1,2,3 Active Grille Shutter (AGS), throttle pedal position sensor switch A circuit high, System Voltage below and above Threshold, denied torque request signal, ECU configuration mismatch, ECU vehicle option mismatch, output speed sensor, input speed sensor/Correlation, fan 1 control circuit, throttle pedal position sensor switches D and B circuit low, and DTC U0402-00 for TCM immediate repair. The dealer was notified of the failure. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was approximately 72,000.