2017 NISSAN MURANO — Problems, Recalls & Safety Data

Technical Incident Report: Electrical Component Failure Reference: Technical Service Bulletin NTB19-004 Part Number: 873D6-5AA6A (Control Unit/Actuator) Incident Overview On 2/16/26, the vehicle was being operated by the primary driver when a suspected electrical failure occurred. Upon subsequent inspection, the 873D6-5AA6A control unit and its associated wiring harness were found to be severely compromised by thermal damage. Detailed Observations: Thermal Damage: The control unit housing showed significant melting. Residual smoke was present during the inspection, indicating a high-temperature event caused by a short circuit or component failure. Harness Integrity: The wiring harness insulation was melted and charred. Due to the extreme heat, the plastic connector had become brittle and lost all structural integrity. Component Failure: During the attempt to disconnect the unit for safety inspection, the connector shattered, leaving the internal wiring of the harness exposed. Documentation: High-resolution photographs have been captured to document the state of the melted housing, the shattered connector, and the exposed wiring.

Technical Incident Report: Electrical Component Failure Reference: Technical Service Bulletin NTB19-004 Part Number: 873D6-5AA6A (Control Unit/Actuator) Incident Overview On 2/16/26, the vehicle was being operated by the primary driver when a suspected electrical failure occurred. Upon subsequent inspection, the 873D6-5AA6A control unit and its associated wiring harness were found to be severely compromised by thermal damage. Detailed Observations: Thermal Damage: The control unit housing showed significant melting. Residual smoke was present during the inspection, indicating a high-temperature event caused by a short circuit or component failure. Harness Integrity: The wiring harness insulation was melted and charred. Due to the extreme heat, the plastic connector had become brittle and lost all structural integrity. Component Failure: During the attempt to disconnect the unit for safety inspection, the connector shattered, leaving the internal wiring of the harness exposed. Documentation: High-resolution photographs have been captured to document the state of the melted housing, the shattered connector, and the exposed wiring.

Technical Incident Report: Electrical Component Failure Reference: Technical Service Bulletin NTB19-004 Part Number: 873D6-5AA6A (Control Unit/Actuator) Incident Overview On 2/16/26, the vehicle was being operated by the primary driver when a suspected electrical failure occurred. Upon subsequent inspection, the 873D6-5AA6A control unit and its associated wiring harness were found to be severely compromised by thermal damage. Detailed Observations: Thermal Damage: The control unit housing showed significant melting. Residual smoke was present during the inspection, indicating a high-temperature event caused by a short circuit or component failure. Harness Integrity: The wiring harness insulation was melted and charred. Due to the extreme heat, the plastic connector had become brittle and lost all structural integrity. Component Failure: During the attempt to disconnect the unit for safety inspection, the connector shattered, leaving the internal wiring of the harness exposed. Documentation: High-resolution photographs have been captured to document the state of the melted housing, the shattered connector, and the exposed wiring.

The contact owns a 2017 Nissan Murano. The contact stated that with the traction control feature deactivated and while driving up the snowy and icy inclined gravel drive way, the traction control light suddenly began to flash off and on, the vehicle stopped accelerating and began to slide backwards and off the gravel driveway, down a 30-foot embankment, rolling over several times and landing on the passenger side. During the incident, the driver sustained a left wrist injury and the front seat passenger sustained bruising of both legs and the right shoulder. No medical treatment was immediately required. The vehicle was later towed away. The cause of the failure was not yet determined. The manufacturer was notified of the failure. The local dealer was not contacted. The contact was informed that the VIN was not included in the NHTSA Campaign Number: 19V807000(SERVICE BRAKES, HYDRAULIC). The contact indicated that the vehicle had experienced the same failure listed in the recall. The failure mileage was 120,000.

Have noticed when turning a corner vehicle has some slight jerking motions before it picks up speed. Vehicle also has a whining/humming sound that it’s making somewhere in the transmission (CVT). I haven’t ever received a recall or CVT extended warranty about this vehicle before but I received this warranty in the mail last week 11-12-25..This warranty would have covered my problems with the vehicle but I was told it expired last year.. Why send it to me this year and it’s useless