2018 JEEP WRANGLER Power Train Problems

Vehicle equipped with a 3.6L Pentastar V6 engine developed loud ticking noises, engine misfires, and loss of power while driving. The vehicle hesitated during acceleration and could not reliably maintain speed, creating a safety risk in traffic. An authorized dealership pulled diagnostic trouble codes, acknowledged the abnormal ticking, and advised the failure was likely related to the camshaft, lifters, and rocker arms. The vehicle was then taken to an independent mechanic for further inspection. The independent mechanic confirmed failure of the valve train and camshaft components, requiring replacement of the passenger side intake camshaft (Bank 2), cam phaser, phaser bolt, and all lifters and rocker arms. Photos of the failed components are available. The defect was confirmed by both a dealership and an independent repair facility. Issue presents risk of sudden loss of power while the vehicle is in motion.

Problem Description (very important): My 2018 Jeep Wrangler experiences a severe and violent front-end shaking commonly referred to as “death wobble.” This occurs while driving at highway speeds and makes the vehicle difficult to control until I slow down significantly. The shaking feels dangerous and unpredictable and creates a serious safety risk. I transport my children in this vehicle, and this issue is frightening and unsafe for passengers and other drivers. My dealership states there is no recall, but I am aware of widespread consumer complaints, documented defects, and lawsuits involving death wobble in Jeep Wranglers, including the 2018 model year. I believe this is a known steering/suspension defect and not normal wear and tear. I am reporting this for safety reasons.

My 2018 Jeep Wrangler Unlimited has experienced repeated no-start failures and electrical/CAN-bus communication issues. The vehicle has intermittently failed to start and ultimately became completely inoperable. Due to the electrical failure, the vehicle was towed to an authorized Jeep dealership on June 8, 2025. Despite remaining in the dealership’s possession for several months, no diagnostic testing or repairs have been completed. The electrical failure prevents safe and reliable operation of the vehicle and poses a risk of being stranded without warning. As of December 2025, the vehicle remains inoperable and unrepaired.

I took my JEEP to the dealer because it was making a rubbing sound. They told me the rear end and differential where out and needed replaced. Originally the parts were on a 45 day backorder. 3 months later the parts on still on back order. I notified Jeep customer service, my case manager said the parts may be available Dec. 19th. There is a high demand for these parts and that there are not enough available.

The contact owns a 2018 Jeep Wrangler JK. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. There were no warning lights illuminated. The contact stated that the transmission failed to shift out of first gear and failed to exceed 8 MPH. The RPM was elevated almost to the red line. The contact stated that the failure had occurred several times, and the vehicle was unsafe to drive. The vehicle was taken to the dealer; however, the failure was not duplicated. The contact later purchased a portable diagnostic tester. The contact retrieved DTC: U414 (Transmission Control Module Failure). The dealer was contacted and advised the contact to take the vehicle in for a diagnostic test. The contact stated that the vehicle was taken to the dealer for the diagnostic test. The manufacturer was not made aware...

My 2018 Jeep Wrangler JL Sport is experiencing multiple premature engine failures that present a serious safety risk: •Vehicle overheats while driving. •Recurrent misfire on Cylinder #5 (DTC P0305). •White exhaust smoke with a sweet coolant smell on cold start. •Coolant loss despite recent refill. •Oil contamination with metallic particles found during inspection. •Valvetrain noise from the right bank, suspected intake camshaft wear. These conditions create a risk of engine seizure or sudden stalling while driving, which could cause a crash. Manufacturer awareness: Jeep/Mopar has issued bulletins acknowledging these exact problems, including: •TSB MC-11018482-0001 (May 2025): Intake camshaft/rocker wear causing misfires (P0301–P0306). •Customer Satisfaction Notification ZD8 (2023): Coolant inlet tube fastener issue causing coolant leaks and overheating. My vehicle’s symptoms directly align with these known manufacturer issues. Despite this, Jeep/Mopar has denied goodwill repair coverage. Safety Concern: This defect is not just a performance issue — it creates a high...

The panel display is short circuiting. It flickers on and off then goes black. Abs modular was malfunctioning, had to be place and damage the Axel Locker system- jeep wouldn't come out of park.

Vehicle loses power steering while driving and is near impossible to steer when this happens. If in a curve i'm afraid the vehicle will not respond in time and leave the roadway or cross into oncoming traffic.

First it was my clutch blowing up including the transmission from underneath me while I drove down a hwy. Then it was a month later before I got it back. (I'm single, and it's my only vehicle). Once I got my jeep back the start/stop button stopped working. I had to lock/unlock with the key fob for it to start. Even with both fobs in the jeep. Now every code, 101 to be exact) is being thrown out of nowhere. Every light goes off, the wipers start going off, the sway bar and traction control disconnects while I'm driving along with the steering wheel locking up while I'm driving down the hwy. The brakes are pulling very badky to the left and /or right. The entire thing is absolutely a death trap. I can't believe this was passed by someone who has the customers best interest for safety. I'd like...

While driving the transmission and clutch system blew up. And I mean that in the literale sense. Sparks and a big flash. Unfortunately, I was an hour away from where I live. This caused me to have to find a way home and find a tow company that would be able to pick up my jeep on the side of the highway, tow it an hour to me. I couldn't afford that, so it was taken to the Chrysler dealership there and it was there for a month before they could work on it due to the parts having to be ordered and shipped in. Once the entire clutch system and transmission fully replaced I have to find a way to go back and pick it up. It was after hours when I finally got to it. That's when the mechanic that worked on it researched and found the recall...

The contact owns a 2018 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train); however, the part to do the recall repair was not yet available. The local dealer was contacted. The dealer informed the contact that the parts were on backorder. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

The vehicle will intermittently struggle to engage in 1st gear, the brake pedal gets hard, the auto stop start light will display on the dash and the esc light will display on the dash. Each issue may occur separately, not at all or they will all occur within 5 mins of driving the vehicle. I have been at a traffic light where the vehicle would not immediately engage in 1st gear and the vehicle behind me came within a few inches of rear ending my vehicle when I did not begin moving with the flow of traffic. I also have a similar experience with the auto stop start system failing while at a traffic light which caused the vehicle to stall in the intersection and I could not restart the vehicle without completely power cycling the ignition two times. The problems have been reproduced on multiple occasions throughout the past...

My vehicle will randomly have the check engine light come on, a service shifter light come on, and then lose the ability to steer. I have taken it to the dealership twice and told it was fixed. Now it is back at the dealership for the third time. As a result of this issue I was involved in a car accident when a van came into my lane and I was unable to avoid impact and they were able to leave the scene. This is a safety issue for not only myself and anyone in my car but also anyone on the road around me. I did not file a police report regarding the accident as my situation involves a language barrier and I was so upset I just wanted to get home and be safe. Now I am in a state of fear anytime I drive my vehicle. I...

The contact owns a 2018 Jeep Wrangler. The contact stated that the vehicle was taken to the local dealer to be repaired under NHTSA Campaign Number: 23V116000 (Power Train). The vehicle was repaired. The contact stated that after retrieving the vehicle, the vehicle intermittently failed to start. There were no warning lights illuminated. The vehicle was towed back to the local dealer and the contact was informed that a diagnostic test needed to be performed; however, the vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 60,000.

Rear axle and differential began to make a whirring noise indicating bad bearings. After taking it to a shop who replaced the axle shaft, the noise continued. They noticed excessive wear in the differential components and said that it requires a rebuild. Another shop looked at it and agreed on the excessive wear, advising that the vehicle is undriveable until it can be repaired. The second shop has said this is becoming a common failure on this line of Jeep Wranglers and it ends up requiring a full replacement of the entire axle housing and assembly. The vehicle is undriveable because if the rear axle fails it would no longer be able to move. As it has not been repaired as of the date of this report, the components are available for inspection.

The contact owns a 2018 Jeep Wrangler. The contact stated while driving over a significantly bumpy road surface and exceeding 50 MPH, the vehicle experienced the death wobble. The contact stated that the front end of the vehicle and the steering wheel shuddered violently. The contact released the accelerator pedal and the vehicle responded as needed at slow speeds. The vehicle was taken to the dealer, where it was diagnosed that the steering dampener had failed and needed to be replaced. The contact stated that the dealer replaced the steering dampener several times under warranty; however, the failure progressively worsened and occurred while driving over minor bumps. The vehicle was taken to a second dealer, Northland Chrysler Dodge Jeep Ram (14100 Eight Mile W, Oak Park, MI 48237); where it was diagnosed that the traction bar needed to be replaced. The vehicle was not repaired. The manufacturer was notified of...

After starting the Jeep Wrangler it will not shift into drive and it says shifter needs service, then ABS needs service start stop needs service, it keeps flashing these warnings. It can sit for a hour or day then becomes driveable, took to local mechanic he says it's a Jeep dealer problem (had several people with this problem) they did repairs, but call them and they say never heard of this problem. It's a 2018 Jeep Wrangler.

The contact owns a 2018 Jeep Wrangler. The contact stated that immediately after the vehicle was serviced under NHTSA Campaign Number: 23V116000 (Power Train) the "Service Transmission" and "Clutch Overheating" warning lights intermittently illuminated while operating the vehicle. The vehicle was taken back to the dealer who performed additional services on the vehicle, but the failure persisted. The manufacturer was notified of the failure. The contact stated that the failure had not occurred prior to the recall repair. The failure mileage was 65,000.

The contact owns a 2018 Jeep Wrangler. The contact stated while driving at an undisclosed speed, the contact became aware of a failure with the transmission while attempting to shift into reverse(R). The contact state that several unknown warning lights were illuminated. The vehicle was towed to the dealer where a diagnostic test was undetermined, and the vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 93,000. The VIN was not available.

The contact owns a 2018 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the service transmission warning light illuminated, and the vehicle was unable to exceed 45 MPH. The contact stated that the failure occurred after the vehicle was repaired under NHTSA Campaign Number: 23V116000 (Power Train) was performed. The vehicle was taken to a local dealer however, the cause of the failure was not yet determined because the dealer could not retrieve a DTC code. The vehicle was not repaired. The contact stated that the failure persisted. The manufacturer was made aware of the failure and several cases were opened. The failure mileage was approximately 69,000.

VIN [XXX] Hi everyone, I’m new to the group and hoping for some guidance and support. I tried to message Jeep Cares but the message button does not appear on their profile name. I bought my 2018 Jeep wrangler JKU Rubicon December 2021 with 29k miles on it and by May 2022 my clutch blew out with only 32k miles on it! They said it was the worst they’ve seen (doubt it) and would not cover it. In fact, they wanted $4k to replace it with a mopar one. I told them where to go and bought a centerforce dual friction and had it installed at a local shop for $3,700. I chose centerforce to avoid having issues again with the mopar one. Everything was fine till the rear main seal went out and had to be replaced under warranty. When I got it back there was a ticking noise...

Car shuts off while driving

See attached document for complaint

The Wrangler will shift out of gear and into neutral and steering become very hard and difficult to maneuver while accelerating from a stopped position and at times at highway speed. On the highway one can coast to the side of the road and shut off engine and restart and move again. This can also be done at an intersection but big safety concerns when pulling onto a highway with traffic, Multiple check lights will come on including check engine, stability control and service shifter. The Jeep has been taken to the dearer for repair to no resolve. Codes are cleared and problem persists. Began at about 70k miles and has persisted since.

The contact owns a 2018 Jeep Wrangler. The vehicle was taken to the local dealer for NHTSA Campaign Number: 23V116000 (Power Train). The vehicle was repaired, but the failure recurred. The contact stated that upon retrieval of the vehicle, the service transmission warning light illuminated. The vehicle was taken back to the local dealer, where it was diagnosed with a software failure, but the vehicle was not repaired. The manufacturer was contacted, who opened a case. The failure mileage was approximately 11,600.

The contact owns a 2018 Jeep Wrangler. The contact stated while at a complete stop, she noticed an abnormal overheating odor. The vehicle was taken to the dealer, where the recall repair of NHTSA Campaign Number: [XXX] (Power Train) was performed. The contact stated that after the repair, the message "Service Transmission" was displayed. Additionally, the vehicle failed to exceed 10 MPH while driving and depressing the accelerator pedal. The vehicle was driven back to the dealer, who informed the contact that the failure could be caused by a computer malfunction or a pre-existing issue. The manufacturer was notified of the failure and advised the contact to take the vehicle to another dealer for repair. The vehicle was towed to a second dealer, Phillips Chrysler Jeep Dodge Ram (3440 S Pine Ave, Ocala, FL 34471), who informed the contact that the manufacturer had advised them to replace the clutch for...

The contact owns a 2018 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train) however, the part to do the recall repair was not yet available. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

I was stopped at a traffic light, when the light turned green, I started to move forward and in approximately 6-7 feet the vehicle come to a complete stop. The engine was still running, the engine light came on and the letter on the shifter started to blink. The rear tires/drive train locked up. This through me forward and I was wearing my safety belt. The vehicle was towed to a jeep dealer ship; the car had to be dragged onto the flat bed. The tow truck driver needed to use a soup product to slide the car on the street and on to the bed. I will not hear back from the dealer ship till next week on exactly what happened. I was coming out of the mall parking lot to get onto the Garden State Parkway. If I had been on the Parkway doing 65 mph, I firmly...

The contact owns a 2018 Jeep Wrangler. The contact stated that while he was sitting at a stop light, the service shifter warning light illuminated. The contact stated that the service shifter was inoperable, and the vehicle would not move. The contact stated he turned the vehicle off and back on but the failure persisted. The vehicle was towed to an independent mechanic where it was diagnosed as a failed service shifter and the service shifter needed to be replaced. The vehicle was repaired. The contact stated that in addition, the vehicle had a corrosion failure. The contact stated that the engine fan continuously came on, and it prompted the contact to check the antifreeze level. The contact stated when he removed the antifreeze container's top he noticed a rust bubble on the opening of the container. The contact stated he inspected the vehicle and noticed corrosion on all the...

The contact owns a 2018 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train) however, the part to do the recall repair was not yet available. The contact stated while driving 60 MPH, he noticed a burning odor. Additionally, the contact stated that he heard an abnormal grinding sound and noticed that there were unknown black fragments propelling from underneath the rear of the vehicle. The contact then noticed steam rising from underneath the hood. The contact pulled to the side of the road. The contact stated that upon attempting to lift the hood, he noticed that the hood was significantly hot. The contact allowed the vehicle to cool down. An exclamation warning light was illuminated. The vehicle was then towed to the residence. The contact stated that he attempted to test-drive the vehicle; however, the vehicle failed to go into gear with the clutch being...

Jeep dash warning lights will randomly all come on at once. This includes service shifter, service airbags, service braking system, ABS warning, cruise control disabled and many others. When it does this, which is daily, the power steering goes out completely at highway speeds and sometimes curves. This has caused me to nearly hit other drivers head on with my family in the vehicle with me. It has left me stranded many times by not recognizing the key fobs and locking the transmission in park at stop lights. I just bought the vehicle, with 64000 miles on it, in October as my primary transportation and I am afraid to drive it. This has caused me severe hardship and endangered mine and my family's life on several occasions. This problem is extremely common with my model year, as seen on several online forums and Jeep has refused to acknowledge the problem...

The contact owns a 2018 Jeep Wrangler. The contact stated while driving approximately 55 MPH, he noticed an abnormal melted metal odor. The contact veered to the side of the road. The contact stated that he inspected the hood and underneath the vehicle, but no issues were found. The contact stated that the odor persisted as he was driving back to his residence. The contact also stated that while changing gears, the clutch went down to the floorboard and failed to rise. Additionally, the gear shifter was loose, and the transmission seemed to be on neutral (N). The contact stated that another driver then alerted him that there was fire in the front of the vehicle. The contact immediately pulled to the side of the road. The contact then saw fire coming from the cowl. The contact and his partner immediately exited the vehicle. The contact then remove his belongings...

The first recall was issued almost 3 years ago and the "repair" was to add to a software update to solve with a mechanical issue. A warning light would be set to go on if the temperature of the clutch/transmission got above a certain temperature. This doesn't resolve the actual problem of a poorly designed clutch assembly. The second recall is for the same issue and has had a status of "remedy not available" for too long. The clutch assembly can overheat but the clutch also regularly slips creating acceleration issues. There have been countless occurrences of pulling into traffic and the clutch slipping and almost being hit by other vehicles. In addition, the potential for the transmission bell house to fracture and the vehicle to catch on fire is a major concern. There are many posts in online Jeep JL forums. There is a "jeep clutch recall" facebook group...

The clutch plate has failed on my 2018 Jeep Wrangler. I brought it into the dealer to take a look at it when I was experiencing the clutch slipping while shifting into first gear and also the "Service Auto Start Stop" indicator illuminating. Once the indicator illuminated, it also prevented by cruise control from working. After the dealer conducted troubleshooting of the issue, they told me that it was due to a safety recall on the clutch plate but that parts were unavailable. This appointment took place on August 4th, 2023. I was told that this issue could lead to a fire, so I have not been driving the vehicle since then. As of October 31st 2023, they still do not have the necessary parts to fix the issue. In the meantime, I've had to arrange for alternate transportation which cost me ~$3,700.

The contact owned a 2018 Jeep Wrangler. The contact stated that while driving at 60 MPH, the vehicle had lost power and had shifting issues with the manual transmission. The contact noticed smoke from under the hood and tried to pull to the side of the road. While pulling to the side of the road, under the hood had caught on fire. The contact was able to pull to the side of the road safely. The automatic shift warning light was illuminated. The vehicle was towed to a scrapyard. The origin of the fire was unknown. The fire was located under the hood. The fire department had extinguished the fire. A fire department report was not filed. A police department report was not filed. The vehicle had not been diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage...

The contact owns a 2018 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train) however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while driving at an undisclosed speed, the transmission slipped out of 2nd gear, with an abnormal grinding sound. The contact stated that the vehicle failed to properly accelerate. The vehicle was not repaired. The failure mileage was 68,000. VIN tool confirms parts not available.

The contact owns a 2018 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train) however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

- There was a recall issued in Feb'23 related to the clutch on manual transmissions, however a remedy has yet to be announced as of 9/28/2023 - Started experiencing issues with clutch in May'23. Clutch would slip while switching gears, gears would grind while shifting, engine would rev while maintaining gear, as the clutch/gears would slip in & out. No warning lamps or messages alerted related to this issue. - Took vehicle to dealer for inspection in May'23, dealer confirmed the clutch disc and release bearings were worn and the pressure plate and flywheel had hotspots and potential cracks, which is what was called out in the recall - dealer replaced flywheel clutch assembly, pressure plate and release bearing in Jun'23 - submitted expenses per recall guidance for reimbursement, but told by company that reimbursements will not be processed until remedy has been determined. 7 months and no remedy announced,...

The contact owns a 2018 Jeep Wrangler. The contact stated while driving approximately 65–70 MPH, shifting from fifth to sixth gear, an abnormal burning odor was detected. The Auto START warning light was illuminated. The vehicle was taken to the local dealer, where it was diagnosed that the clutch plate was burned. The vehicle was not repaired. The contact called the manufacturer and was referred to the dealer for assistance. The contact stated that the failure was related to NHTSA Campaign Number: 23V116000 (Power Train). The failure mileage was approximately 49,000.

The contact owns a 2018 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train) however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2018 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train) however, the part to do the recall repair was unavailable. The contact stated while driving approximately 30 MPH, there was an abnormal banging sound coming from underneath the floorboard. The contact stated that the vehicle stalled, and smoke was coming from underneath the vehicle. The contact stated he was not aware of any warning lights being illuminated. The vehicle was towed to a dealer. The dealer diagnosed and determined that the transmission case was cracked open and severely damaged, and the transmission needed to be replaced. The vehicle had not been repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 70,000. VIN tool confirms parts not yet available.

The contact owns a 2018 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train) however, the part to do the recall repair was not yet available. The local dealer was contacted and determined that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and confirmed that the parts were not yet available. The contact stated while driving at undisclosed speeds, the transmission was slipping. The failure mileage was unknown. VIN tool confirms parts not available.

clutch smoking and burning smells also audible chatter going into gears and slipping in some gears open safety recall for clutch and no one wants to help me???? since jeep hasnt put out a fix???? the fix is to replace the clutch and pressure plate asy with an aftermarket asy. but i can get anyone to step up and make it happen

The contact owns a 2018 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train) however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and determined that parts were not yet available. The contact stated that the vehicle hesitated while shifting gear. The vehicle was not taken to be diagnosed or repaired. The failure mileage was unknown. VIN tool confirms parts not available.

The contact owns a 2018 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2018 Jeep Wrangler. The contact stated that while her husband was driving at an undisclosed speed, he became aware of an abnormal burning odor inside the vehicle. The contact stated that her husband stated that the gear shifter was inoperable. The contact stated that the vehicle was taken to the dealer where it was diagnosed with clutch failure and that the clutch needed to be replaced. The contact stated that that she received notification of NHTSA Campaign Number: 23V116000 (Power Train) and was informed by the dealer that parts were not yet available for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 23,000. VIN tool confirms parts not available.

My recently purchased Jeep Wrangler (certified pre-owned) [XXX] was included in the NHTSA recall #23V-116 which can result in a fire arising from a fractured clutch plate. Due to this significant safety risk, FCA has prohibited all dealers from selling manual transmission Wranglers models from 2018 to 2023. Therefore, it then comes as a total surprise that the dealer which sold the vehicle as Certified Pre-Owned declined to take the SUV back despite being still within warranty, driven for less than 3.000 miles and still with an opened unfixed safety recall. Attempting to remediate the situation I offered them the option of having the vehicle repaired - at their cost - with quality aftermarket parts, such as the CenterForce clutch assembly kit for Jeeps, but was also denied. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2018 Jeep Wrangler. The contact stated while driving 65 MPH, the vehicle decelerated unintendedly. There was no warning light illuminated. The contact attempted to shift gear however, the vehicle failed to respond. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer scheduled an appointment however when the contact took the vehicle to the dealer for the recall competition it was confirmed that the parts were still not available. The dealer rescheduled the recall appointment in hopes the parts would be available by that date. The manufacturer was made aware of the failure. The failure mileage was 40,000. Parts distribution disconnect.

On occasion while driving several dashboard error lights will go on. These include ABS, Traction Control, electronic stability control, air bag and brake light. When these lights come on the power steering is typically lost and making it extremely difficult to steer the Jeep. It takes everything my wife to turn the steering wheel and get off the road. The brakes also tend to be applied which further makes it difficult to turn as the vehicle is slowed down. This issue not only endangers the driver and passengers in my vehicle but also those around me due to the inability to properly control my vehicle. I have had the vehicle at the dealers service center and they are not sure what the issue is. They have been able to reproduce but are still trying to discover root cause. This seems to be a widespread problem as both my 2018 Jeep...

Clutch is making unexpected burning smell (after normal driving). Clutch pops out of gear while at highway speeds, and when in 4-wheel drive. Sometimes grinds during shift for no apparent reason. FCA says there is a recall effecting my vehicle, but part is still not available. FCA sends me to dealership for assessment. Dealership says there is nothing they can do as part is not available and they are..."at the mercy of Jeep." I'm afraid to drive the vehicle. It is my only vehicle.