2018 JEEP WRANGLER Structurebody Problems

Paint, bubbling and corrosion not declared as a defect by the jeep dealership. I would have never purchased knowing this information. I am looking for a goodwill repair of the defect of mixed metal causing corrosion on the body. Jeep states I am out of the extended warranty for repair. I am hoping to open a claim to get a repair of this manufacturing defect that was not disclosed in good faith to me.

My 2018 Jeep Wrangler JL has a known corrosion issue TSB31-001-19 and TSB31-002-20. Corrosion on doors and hinges and spot welds. I have called local dealers and they won’t help. I got with the Jeep help line and they gave me a case number and said they would not be doing anything about it. They never gave me the opportunity to send pictures of corrosion in said areas. There is a Goodwill program that I asked about and was refused so I’m reaching out to the NHTSA and BBB to get some help with this issue. This is a well known and documented issue and not owner negligence. The Case# given to me was 94287282.

After filing my first concern with the vehicle and attempting to rack my brain with answers to why a 2018 is falling apart at the seams, I can only come up with either fraud, or the vehicle has been modified in major ways and glued together only to fall apart every bump I go over. After some reading I’m questioning 49 CFR part 565 form that was turned in after I purchased the vehicle means that I possibly have a replica, “remanufactured”, or altered vehicle. I’m not sure of the legality of selling a vehicle built from whatever vehicles I have, I do know that parts are not all the same years upon scanning modules I got some strange replacement identifiers that I will send. I also question if it really passed emissions being that my short term fuel trim sensor passed the catalytic converter on both sides stays over...

After purchasing seems the vin was updated with information I was not disclosed. The bcm has never worked correctly the instrument panel is erratic and even with a code reader showing P codes there’s no check light. The steering makes the entire vehicle jump over half a road. Blind spot monitors don’t know what to do sometimes they are unavailable, odometer has all 9s sometimes. I did all the checks on the vehicle at the time and what I was given showed I had a 2018 4 door Sahara and that was what I was led to believe. After having issues and getting my registration I started looking at everything more because the dealer registered me as a commercial passenger truck(still don’t know why) but found a report that says Moab/sahara and my seems my vehicles body chasis and motor are all over the place. I’m pretty sure the engine...

There is paint bubbling on all 4 doors near the hinges and bottom of the door, as well as the hood of the vehicle.

Paint peeling, bubbling. Has been happening for over 2 years. Doors and hinges and hood.

I have a 2018 Jeep Wrangler JL series. I was driving down the highway, and the soft top latches sheared off, causing the top to rip back off the top of the Jeep. These clips fell down inside the car and sharp plastic pieces hit my sunglasses. The place where they sheared off was not at any boat locations or latching sections. This year was at the curve where it boats on to the soft top roof frame. The flat section where the sheer occurred was about 2 1/2 inches to 3 inches by only a quarter inch thick. This thickness was not substantial enough to hold the roof locked down tight. This could have created an accident as I was going down the highway at 60 miles an hour almost losing control of the vehicle. I have visited the dealer and called Jeep. Customer care they offer no support....

My soft top has never been unzipped, and the back plastic windshield has started to come apart. This causes water to get into my car when it rains. So much water got into my car from the exposed opening in the back window, my car jack actually rusted and cannot be used, so now I have no jack for my car. This opening also causes bugs to get in and lay eyes or make nests, putting me at potential risk to get stung. The water has also caused a build up of dirt on the back windshield, causing extreme difficulty to see out of the back windshield.

Water is inside passenger seat and driver side Always is raining water problem

My door and hood hinges are severely corroded; this is a known issue that has resulted in a TSB. However, dealers are unwilling/unable to complete the repair work due to the high volume warranty claims they receive related to this issue. My door hinges have corroded to the point that they’ve undoubtedly lost structural integrity.

Paint bubbling up all over due to aluminum usage for the body.

There is a missing weld on the lower passenger rear control arm bracket that looks like a manufacture defect. I recently started hearing a clanging noise and brought it to the mechanic. I was not put at risk of safety (for the tie being). The problem has been confirmed and looked at ONLY by a mechanic. There were no warning lights. How do i get the welding fixed? the dealer will not help me repair it.

I purchased my 2018 Jeep Wrangler JL Sport S 4 door in May of 2021. During the summer, while riding down the road, I had my soft top convertible top back. Upon closing the top when reaching home, the cover had become detached from tent assembly. I am just wondering if this was a apart of the safety recall for 2018 Jeep Wranglers, and if it was, how can I tell if this problem that was addressed with the vehicle I own now and fixed. I have had to buy a replacement top which is being installed on 9-19-2022. The cost is $1764.22, which I will not have an invoice for until they have completed the install.

Rust is forming along the bottom of all of the doors (4 of them) and on or around some of the hinges. The rust seems to be forming inside of the door and what is visible from the outside looks like the paint in bulging slightly.

Frame Welds failed, causing the lower control arm to completely detach from vehicle while driving on highway. Yes, it is available for inspection upon request. Yes, my safety was put at risk. Dealer refused to acknowledge problem, did not wish to see photos or video. The repair was completed elsewhere. December 29th - While driving on the highway I hear a loud bang and pull over. Turns out my front lower control arm mount COMPLETELY BREAKS OFF my frame (See attached photos). I call my dealership (Zappone CDJR in Clifton Park NY), they can’t get me in for a few weeks due to their availability. I get a major favor and get an extremely reputable, nationally known, off-road manufacture to fix it for me. While I am there, they tell me - take it in to the dealership, a lot of your welds need to be looked at. Apparently someone...

Corrosion on all aluminum panel and hinges could lead to failure of hinge.

Within a week with no wear or tear -14000 miles; ALL hinges on all doors as well as the door panels are corroding from the inside out. Huge safety issue- All Wrangler forums are reporting this as well. A paint and bondo job are not the answer! The safety prospect would be New doors and hinges - which are a must. My doors have never been removed! AND my jeep is garaged.

I PURCHASED THE JEEP WRANGLER AS THE FIRST OWNER IN 2018. I IMMEDIATELY FELT INCONSISTENCIES WITH THE STEERING. THE STEERING FELT LOOSE. AT THE TIME I EXPRESSED MY CONCERN TO THE DEALERSHIP THAT I PURCHASED THE JEEP FROM, I WAS TOLD THAT THERE WAS A RECALL ON MY JEEP FOR THE 'DEATH WOBBLE' AND THAT IT WAS LIKELY THE RESULT OF THAT. THE RECALL WORK WAS COMPLETED WITHIN THE FIRST 12 MONTHS OF PURCHASE. THE RECALL REPAIR DID NOT RESOLVE THE ISSUE. THE STEERING CONTINUED TO FEEL LOOSE AND AS TIME WENT ON BECAME MORE EVIDENT. WHEN DRIVING ON THE EXPRESSWAY ONTO AN EXIT AT 40-50MPH I FOLLOWED THE SLIGHT CURVE AND THE STEERING FELT UNSTABLE AND WANDERED. THE BEST WAY TO DESCRIBE WHAT OCCURRED WOULD BE THAT IT FELT LIKE THE FRAME WAS FALLING OFF THE WHEELS. THIS CONTINUED MORE FREQUENTLY AND LAST WEEK BECAME UNMANAGEABLE. WHILE DRIVING 70MPH...

POOR QUALITY WELDS ON THE WHOLE FRAME OF MY JEEP. NOT ONLY THAT BUT IT IS A 2 YEAR VEHICLE THAT IS RUSTING AWAY. CALIFORNIA VEHICLE KEEP IN MIND SO RUST SHOULD BE VERY MINIMAL. ALSO THE 5' UCONNECT RADIO FREEZES OFTEN AND SHUTS ON AND OFF.

WAS DRIVING ON THE FREEWAY WITH MY WIFE AND FIVE YR OLD SON WHEN WE HEARD A LOUD POP UNDERNEATH OUR 2018 JEEP WRANGLER AND INSTANTLY SAW A TRAIL OF SMOKE BEHIND US. WE IMMEDIATELY PULLED OVER TO FIND TRANSMISSION GUILD GUSHING FROM UNDERNEATH WITH TONS OF SMOKE AS WELL. WE WERE HOPING THE SMOKE WAS PROBABLY JUST FROM FLUID ON THE MANIFOLD BUT WE SMALL FLASHES OF FIRE STARTING AT THE TRANSMISSION AND CLUTCH AREA. I QUICKLY GRABBED MY SON SITTING IN BACK AND WE JUMPED OVER THE CONCRETE BARRIER ON THE SIDE AND RAN AWAY FROM THE JEEP AS IT QUICKLY BECAME ENGULFED. IT STILL HAD THE TEMP TAGS HAVING ONLY HAD IT THREE WEEKS. IT WAS A 2018 WITH 15K MILES.

MY 2018 JEEP WRANGLER WAS PURCHASED IN JULY 2019 AND THE FIRST WEEK OF OWNING I NOTICED THAT THE BOTTOM OF THE JEEP'S FRAME APPEARED TO BE RUSTY. FIRST OWNER, HAD NOT BEEN THROUGH A MICHIGAN WINTER... YET. RECENTLY THE JEEP STARTED HAVING ISSUES WITH LEAKING COOLANT AND ONCE I GOT UNDER THE VEHICLE, I WAS IN COMPLETE SHOCK WITH THE APPEARANCE OF THE FRAME. IT STILL IS RUSTY BUT THE ENTIRE FRAME LOOKED LIKE A 6TH GRADE ASPIRING ENGINEER DESIGNED THE VEHICLE AND USED PARTS FROM GRANDPAS GARAGE TO CONSTRUCT THE FRAME. THERE HAS GOT TO BE A SERIOUS ISSUE WITH THE FRAME OF 2018 JEEP WRANGLERS.

2018 JEEP WRANGLER HAS TERRIFYING STEERING ISSUES. CONSISTENTLY WHILE STEERING A HIGHWAY CURVE AT 40-55 MPH MY JEEP STEERING DISENGAGES AND RESULTS IN AN UNSAFE INABILITY TO MAINTAIN THE STEERING COLUMN. THE STEERING CAN BE DESCRIBED AS LOOSE AND COMMONLY DESCRIBED BY PASSENGERS AS THE UNSETTLING FEELING THAT THE FRAME OF THE VEHICLE IS COMING OFF THE WHEELS. PLEASE LOOK INTO THIS SAFETY ISSUE. I HAVE NOT BEEN INJURED YET BUT IF THIS CONTINUES I DON'T THINK IT WILL REMAIN THAT WAY.

I WAS DRIVING ON THE INTERSTATE HIGHWAY WHEN I HEARD A LOUD POP AND SAW AN ARC FLASH AND PULLED TO THE SIDE EMERGENCY LANE. I THEN SAW FLAMES DRIPPING FROM MY JEEP AND THE ENTIRE FRONT END OF THE JEEP WENT UP IN FLAMES AND CAUGHT FIRE.

WATER INTRUSION IN PASSENGER COMPARTMENT - DRIVER AND PASSENGER FLOOR AREA.

WHILE MY 16-YEAR-OLD DAUGHTER AND I WERE DRIVING ON THE FL 528/BEACHLINE EXPRESSWAY THE ENTIRE CLUTCH PRESSURE PLATE ASSEMBLY EXPLODED OFF MY VEHICLE. FLUIDS DRAINED AND IGNITED. THE ENTIRE VEHICLE WAS BURNED TO ASHES. THE FULL ACCIDENT INVESTIGATION REPORT IS INCLUDED IN THE UPLOAD.

TL* THE CONTACT OWNS A 2018 JEEP WRANGLER. THE CONTACT STATED THAT THE FRAME WELDS ON THE VEHICLE WAS RUSTED THROUGHOUT THE SUBFRAME OF THE VEHICLE. ADDITIONALLY, SOME WELDS WERE NOT COMPLETED AND NOT CONNECTED TO THE JOINTS. THE VEHICLE WAS TAKEN TO JOHNSON DODGE CHRYSLER JEEP RAM DEALER (481 US-46, BUDD LAKE, NJ 07828), AND AN INSPECTED. THE MECHANIC INFORMED THE CONTACT THAT THERE WAS NO ISSUES WITH THE VEHICLE. THE MANUFACTURER WAS MADE WARE OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 41,000.

RUST ON THE FRAME (MAINLY THE WELDS) AND HUBS. THE DOORS LEAK ON DRIVERS AND PASSENGERS FLOOR WHEN OPENED DURING RAIN. STEERING HAS PLAY WHEN GOING THROUGH TURNS WHILE MAINTAINING HIGHWAY SPEEDS. *TR

A SIGNIFICANT AMOUNT OF FRAME WELDS ARE RUSTING LESS THAN 1 YEAR AFTER PURCHASE.

BODY: WATER LEAK FROM HARDTOP (RIGHT FRONT PASSENGER) AND (FRONT CENTER - WHERE HARDTOP MEETS WINDSHIELD PILLAR). MULTIPLE ATTEMPTS TO CORRECT (REPLACED ALL SEALS) AND THERE IS STILL A LEAK FROM FRONT CENTER (WHERE HARDTOP MEETS WINDSHIELD PILLAR). SUSPENSION: LOUD 'CLUNK' OR 'THUMP' COMING FROM REAR WHEN ACCELERATING FROM BOTH A DEAD STOP AND WHILE MOVING AT LESS THAN (5) MPH AND ACCELERATING.

WELD QUALITY ON FRAME ARE VERY QUESTIONABLE. WHEN MY JEEP TWISTS WHILE OFF-ROADING, IT SOUNDS LIKE IT WANTS TO TEAR ITSELF APART AND THE DOORS DONT WANT TO SHUT CLOSE WHEN THE VEHICLE IS FULLY FLEXED. THIS DOESN'T HAPPEN TO THE NEWER 2019+ MODELS WITH OBVIOUS BETTER WELDS ON FRAME. IT GETS ANNOYING WITH ALL THE CRUNCHING NOISE THE BODY MAKES WHEN I DRIVE ON UNEVEN ROADS. AGAIN, NOT SEEN ON NEWER MODELS. ALSO, THE STEERING STABILIZER WAS REPLACED AND STILL MY STEERING WHEEL START SHAKING WHEN I DRIVE ON UNEVEN ROADS. I HAVE TAKEN MY JEEP TO THE DEALER 4 TIMES COMPLAINING ABOUT THE RADIO AND IT KEEPS SHUTTING OFF AND VOLUME FREEZING.

WHILE INSPECTING THE VEHICLE I NOTICED SEVERAL (MANY) WELDS ON THE FRAME OF THE VEHICLE THAT WAS VERY POOR. HOWEVER, IN ADDITION TO POOR WELD QUALITY, I NOTICED SEVERAL WELDS THAT WERE POORLY PAINTED/TREATED AND RAW METAL AND RUST ARE VISIBLE TO THE NAKED EYE. HAVING CONTACTED THE DEALERSHIPS IN THE AREA NO ONE WILL RETURN MY CALLS. I WILL BE PERSONALLY TREATING THE AREAS AND REPAINTING TO AVOID WORSENING CONDITION.

NOTHING HAPPENED PER SAY. SAW A NEWS STORY REGARDING THE INVESTIGATION INTO JEEP FOR POOR WORKMANSHIP ON FRAME WELDS. HAD MY JEEP LOOKED AT AND REALIZED MINE HAS FAULTY FRAME WELDS, AS WELL. SEE ATTACHED PHOTOS.

HEAVY AMOUNT OF RUST THROUGHOUT THE BOTTOM OF THE VEHICLE. RUST IS LOCATED ON FRAME WELDS, SUSPENSION CONNECTION BRACKETS, AND AXEL COMPONENTS. PHOTOS WERE TAKEN 10 DAYS AFTER PURCHASING FROM THE DEALERSHIP. I TOOK THE JEEP BACK AND ASKED THEM TO MAKE SURE EVERYTHING WAS SAFE. THE DEALERSHIP LOOKED AT ME LIKE I WAS CRAZY AND SAID YEP THAT IS NORMAL TO HAVE RUST. I ASKED IT IS NORMAL TO HAVE THIS MUCH RUST ON A BRAND NEW CAR. THAT IS CRAZY. THE STEERING JERKS TO THE RIGHT AND LEFT CONSTANTLY AND YOU ARE ALWAYS HAVING TO FIGHT IT TO STAY IN A STRAIGHT LINE. I HAVE READ FROM OTHER REPORT THAT THIS HAS BECOME A COMMON PROBLEM FOR THIS MODEL YEAR. I HOPE THIS ISSUE WILL BE RESOLVED. I BOUGHT MY CAR ON 06/29/2019. THE PHOTOS THAT ARE ATTACHED FOR YOUR REVIEW WERE TAKEN ON 07/11/2019 THANKS [XXX] INFORMATION...

BACK IN OCTOBER 2019, I RENTED A NEW JEEP WRANGLER FROM ENTERPRISE FOR A TRIP TO CHICAGO FOR WORK. WHILE BOTH TRAVELING TO AND FROM CHICAGO, I HAD TWO INSTANCES WHILE TRAVELING ON ROUTE 80 IN OHIO, WHERE I WENT OVER SMALL BUMPS, AND THIS CAUSED THE VEHICLE TO SHAKE VIOLENTLY. ON THE RETURN TRIP HOME, I ACTUALLY HAD TO PULL OFF THE SIDE OF THE HIGHWAY AND SLOW DOWN TO APPROXIMATELY 25 MILES PER HOUR TO GET THE SHAKING TO STOP. WHEN RETURNING THE VEHICLE TO ENTERPRISE, I INFORMED THEM OF WHAT HAPPENED. THEY THEN STATED THEY GET A LOT OF COMPLAINTS ABOUT THE WRNAGLER AND WOULD TAKE SOME MONEY OFF OF MY BILL. I TOLD THEM THEY DON'T UNDERSTAND, AND THAT THERE IS SOMETHING SERIOUSLY WRONG WITH THIS VEHICLE AND THAT MY WIFE HAS THE SAME VEHICLE AND IF THIS HAPPENED IN HER CAR, I WOULD NOT ALLOW...

VEHICLE FRAME HAS SEVERAL LOCATIONS WITH POOR WELDS. SPECIFICALLY, EXCESSIVE WELD SPLASH AND POROUS WELDS SIMILAR IN APPEARANCE TO OTHER OWNERS OF 2018 MODEL YEAR JEEP WRANGLER VEHICLES.

WHILE DRIVING ABOVE 60MPH IF I RUN OVER A POT HOLE OR A BRIDGE EXPANSION JOINT I LOSE MY STEERING .IF I DON'T SLOW DOWN TO 30MPH QUICKLY I WILL NOT HAVE CONTROL. THE PART THAT CONCERNS ME IS THAT I ALREADY WAS SERVICED FOR THE STEERING RECALL .

THERE IS AN OPEN INVESTIGATION TO THE QUALITY AND SAFETY OF THE WELDS ON THE 2018 JEEP WRANGLER JL. I HAVE A 2018 JEEP WRANGLER WHICH IS AN EXAMPLE OF THIS POOR WELDING TO ADD TO YOUR INVESTIGATION. SEE ATTACHED EXAMPLE AS ONE OF THE EXAMPLES OF THE WELDING ON MY JEEP FRAME.

TL* THE CONTACT OWNS A 2018 JEEP WRANGLER. THE CONTACT DISCOVERED SEVERAL CRACKS IN THE UNDERCARRIAGE OF THE VEHICLE. THE CONTACT ALSO STATED THAT THE FRAME WAS POORLY WELDED AND THE METAL IS CONTAMINATED. THE CONTACT SPOKE WITH STONERIDGE CHRYSLER JEEP DODGE (2700 STONERIDGE DR, PLEASANTON, CA 94588, 925-479-9090) AND PLEADED WITH THE DEALER TO EITHER CANCEL HIS CONTRACT WITH THE VEHICLE OR ALLOW HIM TO TRADE IN THE VEHICLE FOR ANOTHER ONE. THE DEALER REFUSED HIS REQUEST AND OFFERED NO FURTHER ASSISTANCE. THE CONTACT REACHED OUT TO THE MANUFACTURER AND WAS INFORMED THAT A REPRESENTATIVE WOULD CALL HIM BACK. THE CONTACT HAD YET TO HEAR BACK FROM THE MANUFACTURER. THE VEHICLE HAD NOT BEEN REPAIRED. THE FAILURE MILEAGE WAS 4,000. *DT *DT*JB

BOUGHT A 2018 JEEP JLU NEW. HAD IT FOR ONLY 5 MONTHS AND ALL OF THE WELDS ON THE FRAME AND AXLES AND OTHER COMPONENTS HAVE RUSTED. HAS ONLY BEEN DRIVEN ON THE ROAD AND NEVER SEEN ITS FIRST WINTER

STEERING WONDERS AND IS UNRESPONSIVE AT HIGHWAY SPEEDS REQUIRING CONSTANT CORRECTION. THIS PROBLEM HAS NOTHING TO DO WITH THE DAMPER OR TRACK BAR, AS I HAVE HAD THESE REPLACED, YET THE PROBLEM PERSISTS (9/29/2019). I ALSO, HAD THE BCM BODY CONTROL MODULE FAIL (7/11/2019) WHILE IN MOTION WHICH CAUSED THE STEERING TO LOCKUP AND THE JEEP NOT RESPOND (THANKFULLY THIS WAS A LOW SPEED INCIDENT).

TL* THE CONTACT OWNS A 2018 JEEP WRANGLER. THE CONTACT STATED THAT THE WELDING ON THE FRONT PASSENGER FLOOR WAS CORRODED, FRACTURED, AND EMITTED A NOISE FROM UNDERNEATH. THE DEALER AND MANUFACTURER WERE NOT CONTACTED. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE APPROXIMATE FAILURE MILEAGE WAS 15,000.

EXCESSIVELY LOOSE STEERING/EXCESSIVE PLAY IN STEERING/DEAD SPOT IN STEERING. 1.5 TO 2 INCHES FROM CENTER IN EITHER DIRECTION IN WHICH STEERING WHEEL DOES NOT ENGAGE TIRES. STEERING JERKS AND HYPER CORRECTS WHEN IT DOES ENGAGE. BECOMES WORSE AT HIGHWAY SPEED. DANGEROUS AT HIGHWAY SPEED. EXCESSIVE WANDERING, DOES NOT TRACK STRAIGHT, AT SLOW SPEED STEERING PULLS IN EITHER DIRECTION AS THOUGH IT NEEDS ALIGNMENT. BAD WELDS, VARIOUS LOCATIONS. PURCHASED VEHICLE IN APRIL 2019. ISSUE HAS BEEN PRESENT SINCE PURCHASE. HAVE HAD IT AT DEALERSHIP 5 TIMES. WE HAVE A 2019 JL RUBICON THAT DOES NOT DO IT. I HAVE ALSO DRIVEN OTHER 2 DOOR 2018'S THAT DO NOT HAVE THE ISSUE AND OTHER 2018'S THAT DO HAVE THE ISSUE. CHRYSLER CURRENTLY INVOLVED. I HAVE VIDEO AND DEALERSHIP/CHRYSLER RECORDS.

MULTIPLE SUB FRAME WELDS ARE INCOMPLETE OR NOT DONE PROPERLY. SEE PHOTOS.

MY FIVE WEEK OLD MANUAL JEEP WRANGLER JL WITH APPROXIMATELY 1500 MILES ON IT WAS IN MOTION TRAVELLING WESTBOUND ON A 55 MPH ROAD WHEN THE INCIDENT OCCURRED. THE JEEP HAD BEEN IN MOTION FOR APPROXIMATELY 1/4 OF A MILE WHEN IT WAS SHIFTED INTO THIRD GEAR AND PART OF THE TRANSMISSION FELL OFF OF THE VEHICLE. WHEN SHIFTED INTO 4TH GEAR, AGAIN MORE PARTS FELL FROM BENEATH THE JEEP. IMMEDIATELY FOLLOWING THE GEAR CHANGE THE LIGHTS ON THE DASH ALL LIT UP AND BLACK SMOKE AND FLAMES WERE SEEN SIMULTANEOUSLY ON THE FRONT PASSENGER SIDE OF THE VEHICLE. THE JEEP WAS IMMEDIATELY PULLED OVER AND STOPPED ON THE SIDE OF THE ROAD WHERE 911 WAS CALLED. THE FIREFIGHTERS FOUND PIECES OF THE TRANSMISSION HUNDREDS OF YARDS FROM WHERE THE VEHICLE BECAME ENGULFED IN FLAMES.

WHILE EXITING A DRIVE THRU, I NEEDED TO MAKE A LEFT HAND TURN. AS I WAS IN MOTION TO MAKE THAT LEFT HAND TURN, THE STEERING LOCKED UP & IT SENT ME CRASHING STRAIGHT INTO A METAL POLE, WHICH JUST HAPPENED TO BE FOR THE PEDESTRIAN CROSSING. THANKFULLY THERE WERE NO PEDESTRIANS AROUND THAT WERE PUT IN HARMS WAY. HOWEVER, MY 2018 JEEP WRANGLER JL WAS NOT SO LUCKY. CURRENTLY WE ARE BEING ESTIMATED AROUND $8,000 - $15,000 IN DAMAGE BUT THAT IS NOT FINAL YET.

FILED COMPLAINT WITH FCA REGARDING POOR FRAME WELDS. I AM A CERTIFIED WELDING INSPECTOR AND REGISTERED PROFESSIONAL ENGINEER, AND THE WELDS WERE ATROCIOUS. MANY WELDS WITH POROSITY, LINEAR POROSITY, AND CLUSTER POROSITY. ALSO WELDS MISALIGNED AND WITH POOR PLACEMENT. AFTER MONTHS OF DELAYS (ORIGINAL COMPLAINT IN FEBRUARY) THEY SENT A WELDING INSPECTOR (STATED FROM THE FRAME MANUFACTURER) TO INSPECT AND WELD ON THE FRAME. DIDN'T GRIND OUT OLD WELDS. JUST WELDED OVER THE TOP OF OLD WELDS. LOOKED EVEN WORSE. POOR WELD PROFILES. WAS TOLD THERE IS NOTHING ELSE THEY COULD DO, AND WAS TOLD I WAS STUCK WITH IT OR I COULD GO TO ARBITRATION. THEN FCA DECIDED TO WOULD OFFER ME A TRADE CERTIFICATE OF $4000. I FELT LIKE THIS WAS TO SHUT ME UP, BUT IT WAS THE ONLY COMPENSATION I WOULD RECEIVE. I TRIED TO GET THEM TO LEMON IT, BUT THEY TOLD ME IT DIDN'T...

RUST BUBBLING UP UNDER PAINT AROUND FOR HINGES. THE RUST IS ONLY EVIDENT ON THE TOP HINGES OF BOTH DOORS (VEHICLE ONLY HAS TWO DOORS). THE DEALERSHIP REFUSED TO FIX IT AND CALLED IT A PAINT IMPERFECTION. HOWEVER THE RUST SPOT IS INCREASING IN SIZE AND NEW SPOTS ARE DEVELOPING. THERE IS NO DAMAGE TO THE PAINT (I.E. CHIPS, SCRATCHES) THAT WOULD EXPLAIN THE RUST. IT SEEMS TO HAVE COME FROM THE FACTORY/ MANUFACTURER.

MY JEEP RUBICON JL FLOATS OR DRIFTS AS I AM DRIVING IT. IT MAKES FOR A HARD DRIVE ON LONG DRIVES AND I MUST LOOK LIKE I AM DRIVING DRUNK TO OTHERS ON THE ROAD. IT IS EVEN WORSE IN WIND AND IT'S WINDY A LOT WHERE I LIVE. IT WAS VERY SCARY TO DRIVE AT FIRST. I DO NOT LIKE IT OR FEEL IT IS SAFE AT ALL. HAVING NEVER OWNED A JEEP I THOUGHT IT WAS JUST ME OR THAT THE TIRES NEEDED TO BE WORN DOWN A BIT. THE PROBLEM REMAINS. WHILE LISTENING TO FM/AM STATIONS THE VOLUME IS WACKY GOING LOW AND HIGH MAKING FOR LOUSY LISTENING. WHEN THE AC COMES ON ON THE HIGHER SETTING MY JEEP SOUNDS LIKE I AM GETTING READY FOR LIFT OFF. VERY LOUD. ONE LEVER ON MY SEAT NEAR THE HEADREST THAT CONTROLS THE ABILITY FOR A PASSENGER TO GET...

THE REDESIGN OF THE 2018 JEEP WRANGLER (JL) INCLUDES AN UNSAFE DESIGN OF THE FREEDOM TOP. WHEN THE FRONT FREEDOM PANELS ARE REMOVED, THE EDGES OF THE BACK PANEL EXTEND ACROSS THE FRONT OF THE SOUND BAR AND ARE NOT FINISHED WITH ANY TRIM, WHICH LEAVES A SHARP EXPOSED FIBERGLASS EDGE TO DRIVERS AND PASSENGERS INSIDE THE VEHICLE. MY HUSBAND WAS DRIVING THE VEHICLE ON THE HIGHWAY WITH THE FRONT FREEDOM PANELS REMOVED IN THE MANNER INSTRUCTED BY THE DEALERSHIP AND BY MOPAR VIA THEIR YOUTUBE TUTORIALS. WHEN HE EXTENDED HIS HAND UPWARD TO REACH FOR HIS HAT, THE EXPOSED EDGE OF THE BACK PANEL OF THE FREEDOM TOP CUT HIS HAND DEEPLY ENOUGH TO SEVER A NERVE AND AN ARTERY, REQUIRING EMERGENCY CARE AND SURGERY. THIS OCCURRED WITHIN 24 HOURS OF PURCHASING THE VEHICLE. THE NEWER 2019 MODEL APPEARS TO HAVE ADDED PLASTIC TRIM TO CORRECT THIS ISSUE, HOWEVER...

THE FRAMES WELDS HAVE POROSITY, LACK OF PENETRATION, SPLATTER, TOO MUCH SILICA. ALSO THE PAINT AROUND THE WELDS ARE CHIPPING, EXPOSING THE METAL. THERE IS RUST STARTING TO FORM INSIDE THE FRAME RAILS. I WANT TO POINT OUT THAT THIS VEHICLE HAS NEVER DRIVEN NEAR SALT AND ONLY HAS LESS THAN 8000 MILES. ALSO. RARELY, THE RADIO TURNS ON BY ITSELF WHILE THE CAR IS OFF.