2017 RAM 3500 Steering Problems

The loss of ABS/ESC/Traction control may cause this vehicle to crash . Warning lights are present, I have a horse trailer and can not use this truck to pull it due to this danger. I have waited over a year for the remedy to be offered but there is no remedy from the manufacturer for these failures of the ABS/ESC/Traction Control.. This happens EVERY TIME I attempt to drive this truck. It has LOW Mileage due to not being able to drive it.

V06 Recall was attempted, but welding could not be done correctly - was told that was the "best they could do" truck continued to steer poorly (constantly have to hold the steering wheel to one side or the truck will veer out of the lane) bc steer ahead wrong, and to wear outer edge of the tires to an unsafe level in less than half the normal mileage. Now Dodge dealership/Stellantis claims the drag link assembly was permanently damaged by their prior recall work, and that truck cannot be aligned or driven safely but also won't fix it. They have been telling me they will action the case "today" or "one businesses day" since 27 Aug. I found out that the alignment and steering problem I had been spending money to fix since 2019 was a result of their poor recall repair and trying to get a response from Dodge...

Steering and/or front suspension developed into what is called a death wobble at 70mph. The steering wheel had so much hard wobble that it became almost uncontrollable to hold onto it, and keep the vehicle moving straight which put the vehicle onto the shoulder and into a shallow ditch. Has the problem been reproduced or confirmed by a dealer or independent service center? No, but when it happened previously, I had it looked at, and supposedly repaired. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? No, there was no damage to the vehicle, but I am taking it back to the shop where the repair was supposedly made. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? No, it came on suddenly.

The truck had a recall done on its steering system. The steering part affected is the drag link. The drag link connects to the steering wheel to the tie rod . The recall fix was to weld the drag link jam nuts so they wouldn't come loose and cause a steering loss. Since the recall the vehicle s drag link can't be aligned correctly with the tie rod the drag link is attached to the steering wheel so when the truck is aligned it backs one side out to far to keep the steering wheel straight. This drag link that was recalled is a (safety issue) it's a bad design and causes the vehicle to sway all over the road and if it fails the truck looses all steering and goes where ever it wants to go Wich will cause a horrible accident and harm innocent family's on the highway...

Abs lights keep going off.

The contact owns a 2017 Ram 3500. The contact stated that while having a routine alignment performed at an independent mechanic, the contact was informed that the steering wheel was cracked. The mechanic was unable to perform the alignment. The vehicle was previously taken to the local dealer under NHTSA Campaign Number: 19V021000 (Steering). The contact called the same local dealer, but the vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 85,000.

The contact owns a 2017 Ram 3500. The contact stated that while driving at an undisclosed speed, the vehicle was pulling to the left side. The ABS warning light was illuminated, causing the cruise control to be inoperable. Additionally, the front driver's and passenger's side tire treads were worn out quickly since having the recall repair performed under NHTSA Campaign Number: 19V021000 (Steering). The contact stated that the vehicle was unable to have an alignment performed due to the nut being welded per the recall remedy. The vehicle was taken to the dealer, where it was diagnosed that an alignment needed to be performed, but declined to replace the drag link assembly. The dealer confirmed that the vehicle had previously been repaired under NHTSA Campaign Number: 19V021000 (Steering); however, the contact stated that the dealer only welded the nut to the adjuster sleeve but did not replace the drag link...

I have the ABS light and traction control light coming on intermittently and the warning "Service ABS system" and "Service Electronic Braking System. Code is C0020-01 - ABS Pump Motor Control-General Electrical Failure. ABS module and HCU are replaced under warranty once.

THE ADJUSTER ON MY DRAGLINK WAS LOOSE AND THE NUTS WERE WELDED TO THE ADJUSTER AND I WAS TOLD THIS WAS A TEMPOARY REPAIR. TODAY I CONTACTED RAM ABOUT A PERMANENT REPAIR FOR MY TRUCK AND WAS INFORMED THAT WEDING WAS A PERMANENT FIX. HOW CAN YOU ALLOW THIS. MY FRONT END IS NO LONGER ADJUSTABLE AND NOW I AM FORCED TO GO TO DEALER FOR FRONT END WORK INDEPENDENT SHOPS DO NOT WANT THE LIBIALTY. WELDING NUTS AND CUTTING THEM LOOSE WEAKENS THE METAL ARE YOU REQUIRING WELDING CERTIFICATION FOR REPAIRS. THIS REPAIR IS NOT SATISFACTORY PLEASE ADVISE THANK YOU

RAM HAS A RECALL FOR THE DRAG LINK, MY DEALERSHIP HAS PREFORMED THE RECALL REPAIR WHICH IS TO WELD SOLID THE DRAG LINK THIS IS NOT A PROPER REPAIR. I WOULD SAY THIS IS WHAT A BACKYARD MECHANIC MIGHT DO TO ENTER A DEMO DERBY NOT A REPAIR ON A NEW TRUCK UNDER WARRANTY. THIS ITEM CAME ON THE TRUCK AS AN ADJUSTABLE PART OF THE STEERING SYSTEM AND RAMS FIX IS TO WELD THIS PART MAKING IT NO LONGER ADJUSTABLE AND THE STEERING CAN NO LONGER BE ALIGNED. MY STEERING WHEEL IS CROOKED AND RAM HAS TOLD ME THAT'S TO BAD WE ARE GOING TO DO NOTHING FOR YOU THAT'S RAMS CUSTOMER CARE NOT THE DEALER...

BROKE SHIFTER ON STEERING COLUMN. SHIFT LOCK WOULD NOT DISENGAGE WHEN BRAKE WAS DEPRESSED.

TL* THE CONTACT OWNS A 2017 RAM 3500. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 19V021000 (STEERING). THE VEHICLE WAS TAKEN TO HILL-KELLY DODGE CHRYSLER JEEP RAM (850-476-9078, LOCATED AT 6171 PENSACOLA BLVD, PENSACOLA, FL 32505). THE CONTACT STATED THAT THE RECALL REMEDY REQUIRED THE PART TO BE CUT AND THEN REPLACED. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE AND PROVIDED CASE NUMBER: 68186480. THE FAILURE MILEAGE WAS APPROXIMATELY 49,000.

RECENTLY, I DEPARTED FROM HOME IN MY TRUCK TO HEAD OUT ON ERRANDS. I FOUND IT WAS DIFFICULT TO STEER. REALIZING IT FELT LIKE A FLAT FRONT TIRE, I PULLED OFF THE ROAD AND FOUND THE FRONT RIGHT TIRE WAS FLAT. AT NO TIME DID I RECEIVE ANY WARNING FROM THE FACTORY INSTALLED TIRE PRESSURE MONITORING SYSTEM. LOOKING AT THE TPMS, THE PRESSURE INDICATED 14 PSI, THEN LATER 11 PSI. AT NO TIME DID I RECEIVE AN AUDIBLE OR VISUAL ALARM FROM THE TRUCK. LATER I HAD THE NEARBY DEALERSHIP INVESTIGATE THIS, AND THEY REPORTED THE SYSTEM IS WORKING AS DESIGNED, BUT THEY CAN'T/WON'T SHOW ME IN WRITING WHEN THE ALARMS ARE SUPPOSED TO ACTIVATE. I HAVE AN OPEN CASE WITH RAM CUSTOMER CARE, BUT THE MANAGER CONTINUES TO POINT TOWARDS THE DEALERSHIP'S VERBAL ANSWER. ANOTHER PERSON I KNOW WAS RECENTLY DRIVING TOWING A HEAVY RIG WHEN ANOTHER DRIVER POINTED...

MY VEHICLE IS SUBJECT TO A RECALL FOR THE STEERING DRAG LINK ASSEMBLY. THE RECALL STATES THE ASSEMBLY WILL BE INSPECTED AND WELDED AS THE REPAIR. THERE IS A REPLACEMENT PART LISTED ON THE RECALL HOWEVER DEALERS ARE NOT INSTALLING THE REVISED PART. I CONTACTED FCA (CHRYSLER) CORPORATE OFFICE ABOUT THE SAFETY CONCERN WITH WELDING STEERING COMPONENTS. MY CONTACT WAS TO RECEIVE THE REVISED STEERING DRAG LINK SINCE NO CREDIBLE AUTOMOTIVE AUTOMOTIVE SOURCE APPROVES OF WELDING STEERING COMPONENTS AND THAT BEYOND THE SAFETY ISSUE THE PART IS NO LONGER ADJUSTABLE OR FUNCTIONAL TO ADJUST DURING ROUTINE FRONT END ALIGNMENTS AND WILL REQUIRE REPLACEMENT AT THE OWNERS EXPENSE. THE RESPONSE FROM THE EXECUTIVE REFERRALS MANAGER WAS THAT I HAD ONE CHOICE AND THAT WAS TO BRING MY TRUCK TO A DEALER FOR THE STATED RECALL REPAIR AND THAT WELDING THE DRAG LINK WAS APPROVED BY THEIR ENGINEERS. I STATED THAT THE...

TL* THE CONTACT OWNS A 2017 RAM 3500. THE CONTACT RECEIVED A RECALL NOTIFICATION FOR NHTSA CAMPAIGN NUMBER: 19V021000 (STEERING). THE CONTACT SPOKE WITH THE MANUFACTURER AND DISAGREED WITH THEIR RECOMMENDATION TO WELD THE NUTS TO THE ADJUSTOR SLEEVE IF THEY MET THE TORQUE REQUIREMENTS. WESTGATE DODGE RAM (10936 STAR RD, WAKE FOREST, NC 27587, (919) 556-3137) AND A TECHNICIAN ALSO EXPRESSED DISBELIEF IN THE REPAIR RECOMMENDATION. THE VEHICLE WAS NOT REPAIRED. THE CONTACT HAD NOT EXPERIENCED A FAILURE. *TT *TR

V06/NHTSA 19V-021 THE FIX FOR THIS RECALL IS NOT ADEQUATE , WELDING AN COMPONENT THAT HAS PART ITS FUNCTIONALLY, ADJUSTMENT AND MAINTAINABILITY, RENDERING IT USELESS , COULD BE CONSIDERED CAUSING IRREPARABLE DAMAGE. I BELIEVE RECALLS SHOULD NOT DAMAGE A VEHICLE , BUT RETURN IT AS FUNCTIONAL AS INTENDED.

TL* THE CONTACT OWNS A 2017 RAM 3500. THE CONTACT RECIEVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 19V021000 (STEERING). LITHIA CHRYSLER JEEP DODGE OF KLAMATH FALLS (2675 WASHBURN WAY, KLAMATH FALLS, OR 97603, (855) 570-6024) STATED THAT THE PART WAS NOT AVAILABLE AND WAS UNABLE TO DETERMINE WHEN THE PART WOULD BE AVAILABLE. THE MANUFACTURER WAS NOTIFIED. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.

FRONT PASSANGER TIRE IS BEING ATE UP AT 16000 THIS HAS BEEN AN ON GOING ISSUE SINCE THE VEHICLE REACH 6000 MILES, AND BEEN NOR RAM REFUSES TO ACKNOWLEDGE A SAFETY ISSUE WITH THE TRUCKS AND WILL CAUSE A FATAL ACCIDENT. WITH 16000 THESE TIRES SHOULD NOT BE WEARING LIKE THIS