2016 HINO CONVENTIONAL MODELS — Problems, Recalls & Safety Data
N/A
Safety Rating
1
Owner Complaint
0
Recalls
18
Service Bulletins
0
Investigations
Overview of the 2016 HINO CONVENTIONAL MODELS
The 2016 HINO CONVENTIONAL MODELS has received a total of 1 safety complaint filed with the National Highway Traffic Safety Administration (NHTSA). 18 technical service bulletins have been issued by Hino Motors Sales U.S.A., Inc. for this model year. The most commonly reported problem area is the Engine (1 complaint).
Recalls for the 2016 HINO CONVENTIONAL MODELS
There are no recalls on file with NHTSA for the 2016 HINO CONVENTIONAL MODELS. No Active Recalls
Owner Complaints for the 2016 HINO CONVENTIONAL MODELS
1 complaint has been filed with NHTSA for the 2016 HINO CONVENTIONAL MODELS. Below is a breakdown by vehicle component.
| Component | Complaints | Crashes | Fires | Injuries | Deaths |
|---|---|---|---|---|---|
| Engine | 1 | 0 | 0 | 0 | 0 |
Most Recent Complaints
TL* THE CONTACT OWNS A 2016 HINO 268. WHEN THE VEHICLE WAS APPROACHING A STOP SIGN OR COMING TO A COMPLETE STOP, THE CONTACT NOTICED AN ABNORMAL ODOR OF EXHAUST FUMES AND THE REGENERATE WARNING INDICATOR ILLUMINATED. WHEN THE CONTACT TURNED OFF AND RESTARTED THE VEHICLE, IT RESUMED NORMAL OPERATION. THE VEHICLE WAS TAKEN TO DARIO DIESEL TRUCK CENTER (182 SW CUTOFF, WORCESTER, MA 01604, (508) 753-8177) TO BE DIAGNOSED, BUT THE CAUSE OF THE FAILURE COULD NOT BE DETERMINED. THE CONTACT WAS ADVISED TO TURN ON THE FRESH AIR SWITCH. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE AND DID NOT ASSIST. THE FAILURE MILEAGE WAS UNKNOWN.
Safety Rating for the 2016 HINO CONVENTIONAL MODELS
NHTSA has not yet tested the 2016 HINO CONVENTIONAL MODELS in its New Car Assessment Program.
Technical Service Bulletins for the 2016 HINO CONVENTIONAL MODELS
Hino Motors Sales U.S.A., Inc. has issued 18 technical service bulletins (TSBs) for the 2016 HINO CONVENTIONAL MODELS. TSBs are notices sent by manufacturers to their dealers describing a known issue and the recommended repair procedure.
167-T2211-2 — FUEL SYSTEM, DIESEL
The purpose of this procedure is to provide instructions in how to perform a manual regen recording on Hino Trucks equipped with a 5th or 7th exhaust fuel injector with DX3.
167-P2211-1 — ENGINE AND ENGINE COOLING
This parts alert is to inform our dealers that when ordering part number 16400E0E62 passenger side radiator support, it will come with an extra bracket as shown below. When replacing the radiator support brackets, the new passenger side support can be installed with no issues
167-B2112-1 — ENGINE AND ENGINE COOLING
SB-21-002 CONVENTIONAL FUEL SENDER LEAK. Certain vehicles may exhibit fuel residue accumulation around the fuel level sensor or cover plate in certain conditions, including if the vehicle is equipped with dual fuel tanks. Updated fuel level sensor bolt sealing washers have been made available to address this condition.
167-T1908-03 — FUEL SYSTEM, DIESEL
The following tech tip is to assist in replacing the engine fuel filter.
167-B1811-01 — SUSPENSION
SB-18-030 Air Spring Shield
167-B1808-02 — EQUIPMENT ADAPTIVE/MOBILITY
SA-18-018 HINO XL SERIES PARTS AND SERVICE SUPPORT
167-B1704-02 — ELECTRICAL SYSTEM:SOFTWARE
SB?17?004 Enhanced engine ECU (Electronic Control Unit) software has been made available to address the following conditions: Engine torque reduction has been increased to 70%, from an original 50%, when the engine ECU detects a P244B ? Incomplete Regeneration, in conjunction with the soot level indicator in the instrument cluster...
167-T1614-12 — SERVICE BRAKES
TT-16-016 In 2015, a copper washer was added between the hydro boost push rod clevis and brake pedal in order to maintain minimum clearance. The purpose of this technical tip is to provide a reference for the location of this copper washer should any part of this connection require disassembly...
167-T1608-12 — FUEL SYSTEM, DIESEL
TT16-009 Current production DEF injectors contain enhancements including improvements to the aluminum housing. When replacing the DEF injector, it is necessary to install the complete DEF injector assembly (Part no. S17J0-E0020) onto the vehicle, not only the center injector portion. Replacing only the center portion of the DEF injector and...
RCB-002-16 — BACK OVER PREVENTION
Emissions Recall - PM Sensor & Engine ECU Software Enhancement, verify requires the work to be performed by referencing the vehicle by VIN within the Hino Warranty System (DCS)
Showing 10 of 18 technical service bulletins.
NHTSA Investigations for the 2016 HINO CONVENTIONAL MODELS
There are no NHTSA defect investigations on record for this vehicle.
Other Model Years of the HINO CONVENTIONAL MODELS
- 2011 HINO CONVENTIONAL MODELS — 0 complaints
- 2012 HINO CONVENTIONAL MODELS — 0 complaints
- 2013 HINO CONVENTIONAL MODELS — 0 complaints
- 2014 HINO CONVENTIONAL MODELS — 0 complaints
- 2015 HINO CONVENTIONAL MODELS — 0 complaints
- 2016 HINO CONVENTIONAL MODELS (current)
- 2017 HINO CONVENTIONAL MODELS — 0 complaints
- 2018 HINO CONVENTIONAL MODELS — 0 complaints
- 2019 HINO CONVENTIONAL MODELS — 2 complaints
- 2020 HINO CONVENTIONAL MODELS — 0 complaints
- 2021 HINO CONVENTIONAL MODELS — 0 complaints