2020 FORD FUSION Vehicle Speed Control Problems

Tire Pressure Monitor System Warning Action Now Issue Since 09-22-2024 The tire pressure monitoring system has detected one or more tires are significantly under-inflated. Suggested Actions: Check the tire pressure to ensure the tires are properly inflated. WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge. See Inflating Your Tires in the Wheels and Tires chapter of your Owner's Guide. Failure to properly maintain your tire pressure could increase the risk of tire failure, loss of control, vehicle rollover and personal injury.

The accelerator pedal broke off while merging into traffic resulting in the immediate loss of speed control.

The steering cable is connected to the transmission hub, and the fitting that connects the two has a gasket that wears away and falls out. This is a recall with vehicles that are made from one of the two plants that assemble fusions, however my vehicle is not covered under the recall even though it is the very same issue as the recall from the other plant. it makes no sense, why is one assembly plant offering a recall for this issue while the other does not? For the same issue of the steering cable coming off the transmission, and not allowing the vehicle to go into gear. I have had to fix this car on the side of the highway before, it will not go into gear on the road. This is not safe at all. You cannot have vehicles just not going into gear while your driving down...

Car shifts into 1st gear when traveling at higher speeds (45+mph), causing a significant jerk and almost causing a rear end collision to myself. Car also loses power and jerks significantly hardwhen shifting to reverse and drive from Park. Afraid to travel over 45mph due to the downshifting.