2021 GRAND DESIGN IMAGINE Unknown Or Other Problems

After reading of other owners of similar and identical models like mine having frame cracks, I made a point to inspect my trailer’s I beam chassis and I discovered horizontal cracks within the I beam, one on each side, over the suspension area. Every picture I have seen looks just like mine, a rusty L shaped crack adjacent to a crossmember welded on the backside of this area. You can see the shape of this crossmember through the surface of the I beam, indicating the metal is quite thin. It took me only a couple minutes to find, as I knew exactly where to look, based on the numerous stories I’ve read about. Upon further inspection, I also found suspect welds that look burned through the frame, leaving a hole behind. This makes me question the quality of the rest of the trailer’s frame. There is also a crossmember at...

Cross member of frame bending, allowing A frame that its connected at to also bend.

On [XXX] we were driving with our travel trailer from South Carolina to Michigan on interstate highways. When we made what was to be a quick late afternoon stop in Detroit, we discovered that the A-Frame on the trailer was severely bent and about to break. We spent the next day trying to get help with repairing it by calling the manufacturer, Grand Design; the local Grand Design dealer; and a couple of welders. None were able to assist us, so we had the trailer hauled back to a welder closer to our home. We were thankful the A-Frame did not completely break on the highway which could have caused a wreck or a major safety hazard. The welder that replaced the metal was surprised the A-Frame metal was so very thin, commenting they had never seen anything so thin on a travel trailer. It was replaced with ¼” metal....

Noticed the frame on our trailer is starting to bulge. We are part of a Facebook group for our specific trailer and apparently this is a common problem/ occurrence. We contacted both Grand Design and Lippert for assistance with fixing the issue which they have done for many but since we are second owners they are refusing to help. This is a major safety issue and of left unfixed could potentially cause a bad accident/ incident. Since this is a common problem in these trailers I feel both Grand Design and Lippert should be held accountable and be required to correct the issue for the safety of their owners and others on the road should the frame snap completely while towing.