2019 FORD FUSION Engine Problems

The contact owns a 2019 Ford Fusion. The contact stated while driving at an undisclosed speed, the engine overheated. The vehicle was towed to the dealer; however, the failure could not be duplicated. The contact stated that the vehicle was towed to the dealer four times; however, the cause of the failure was not yet determined. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was unknown.

This vehicle has a known issue by Ford. In Ford TSB 22-2229 it acknowledges "P0300, P0301-P0304,P0316, P0217, P1285 and/or P1299 stored in powertrain control module (PCM). This may be due to coolant intrusion into the cylinder. To correct the condition, follow the Service Procedure to replace the long block engine assembly." When explained, it states that this issue could cause reduced engine power which obviously be a very dangerous situation if the vehicle is traveling at highway/interstate speeds. The replacement of the long block engine assembly is a complete engine replacement that Ford is not assuming responsiblity for either from a safety or cost standpoint. We are regularly receiving these diagnostic codes now and a recent diagnosis from a Ford dealership confirmed the need for a long block engine assembly replacement which is extremely costly and right now is cost prohibitive, especially for a vehicle that is only 5 years...

Faulty Head Gasket causing coolant to go into the engine - and causing enough issues to need engine replaced - ford mechanics saying they are seeing this more and more with my make and model car. Called ford motor company and unwilling to help with repairs as I’m 3,000 miles over the ability to assist. This apparently was a known issue in which why ford change how they made the head gaskets for the car - my car is 5 years old and 103,000 with no other issues - maintained correctly- and ford knows abt the issue but won’t help customers I currently have a rental as I’m trying to come up with $8,000 to repair my car in which why I have no invoice yet

Upon traveling we noticed a loud engine knocking when the car was at idle. We immediately pulled over and checked the engine. The coolant level was lower than normal and the engine oil level was fine. We immediately returned home and parked the car. While returning home the front camera continued to display an error message that it was not working and would repeat every 30 seconds. After doing research I read that Ford has known about the Fusion Ecoboost having a design flaw where coolant leaks into the cylinder heads and can crack the head as well as a flexplate crack that appears. They issued a "fix" for the flexplate to some models and I would like this applied to my car as I feel they knowingly continued to sell this model with the issues without prior warnings or notices.

My son purchased a 2019 Ford Fusion on 11/30/2019, he is the only owner of this vehicle and did oil changes regularly. On 6/25/24 while driving to work his engine suddenly began running rough and his check engine light started blinking. There was no continuous check engine light that came on prior to the blinking one. The vehicle ran smoothly without any warning signs of engine failure prior to this incident. He pulled over immediately and car was towed to local repair shop. Inspection report states “ Quote for new engine and repair was $10,681.62. Placed telephone call to Ford customer relationship center, was told Customer Satisfaction Program 21N12 would not cover cost of repair because his car was over allowed mileage. 84000 is cutoff and mileage on his car was 84354. Repairs not done at this time due to cost, car is sitting in driveway unusable.

The contact owns a 2019 Ford Fusion. The contact stated that while driving at an undisclosed speed, there was blue smoke coming from the exhaust pipes. The check engine warning light was illuminated. The vehicle was driven to the residence and parked. The contact stated that on another day after starting the vehicle, there was blue smoke coming from the exhaust pipe and the engine seized. The vehicle was towed to an independent mechanic where it was diagnosed with internal damage to the engine. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The contact was advised to contact the NHTSA Hotline and report the failure. The failure mileage was approximately 68,000.

The contact owns a 2019 Ford Fusion. The contact stated that while attempting to start the vehicle, the vehicle failed to start as intended. No warning lights were illuminated. The vehicle was taken to an independent mechanic who diagnosed a misfire in cylinder #3. The vehicle was not repaired. The independent mechanic related the failure to Ford Customer Satisfaction Program: 21N11. The manufacturer was made aware of the failure and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was approximately 2,690.

I was driving down the road like normal and then it stopped wanting to go. The screen on the dash said see manual and had a little orange wrench. The car stopped going. It was still running but I pushed on the gas and it wouldn’t go. I stopped and the car was running rough. I turned it off and then turned it back on. The problem went away and it drove like normal again.

My car started running funny and overheating which took it to the dealership where we purchased it from and they said that the coolant was leaking into the engine which we had to take to ford also to confirm and they said they same thing but wasnt covered under warranty. There is a tsb bullentin on all kinds of fusion to have this problem fixed which my vin number isnt on that list so Im without a car for over 9 months because I cant afford to spend 8000 on a engine when the car isnt that old and I just paid 24000 dollars for it. I would love to know how to get my car on list because it was manufactered at the same plant as the other fusions with tsb and on the same dates so why isnt my car on this list

The coolant leak causing the engine to overheat and become damaged.

Coolant intrusion into cylinder #2, ford knowingly placed bad engines into vehicles including my 2019 ford fusion

The contact owns a 2019 Ford Fusion. The contact stated that while driving at approximately 45 MPH, the engine temperate HOT warning light illuminated. The contact stated that the engine started shaking and the vehicle stalled. The contact was able to drive a short distance to the residence. The contact stated that an independent mechanic inspected the coolant fluid but there were no visible leaks. The mechanic refilled the coolant, but the coolant reservoir was empty the next day. The contact stated that failure persisted and there was white smoke coming from the rear side of the vehicle. The engine overheated warning light was illuminated. The vehicle was taken to the dealer where it was diagnosed that the engine needed to be replaced. The manufacturer was made aware of the failure and the contact was referred to the NHTSA Hotline. The failure mileage was unknown.

Coolant is leaking into the engine. It’s also recalled on every fusion but mine and I’ve been without a car For so long because of this.

Coolant dumping Into turbocharger.

The contact owns a 2019 Ford Fusion. The contact stated that when the vehicle was started, there was white smoke coming from the tailpipe. In addition, the engine was idling rough. The vehicle was taken to the dealer however, the vehicle was not diagnosed. The contact was informed that no diagnosis would be completed due to no warning lights being illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 87,000.

The contact owns a 2019 Ford Fusion. The contact stated while driving 30-35 MPH, the vehicle was making an abnormal flapping noise. The check engine warning light was illuminated with the wrench symbol displayed. The driver was able to pull over to the side of the roadway. The vehicle was taken to the local dealer, where it was diagnosed and determined that the flex plate needed to be replaced. The vehicle was not repaired. The manufacturer was contacted, and the contact was referred to the NHTSA Hotline. The contact stated that the failure was related to Customer Satisfaction Program: 22N12. The failure mileage was approximately 84,009.

The contact owns a 2019 Ford Fusion. The contact stated while starting the vehicle, there was a loud knocking noise coming form the engine. On another occasion, while driving at an undisclosed speed and coming to a complete stop at a traffic stop sign, the same loud knocking noise was present from the engine. The check engine warning light illuminated. The vehicle was taken to an independent mechanic where it was diagnosed that the flex plate needed to be replaced. The vehicle was not repaired. The vehicle was then taken to the dealer who diagnosed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was opened. The failure mileage was approximately 80,000

The engine keeps cracking which leads to the coolant mixing with the oil. Eventually it causes the head gasket to blow.

I am second owner. At just before 110,000 miles the motor expirenced shuddering, with misfires, from P0303. I was able to get it to a Ford Service Center. Diagnosis with a borescope reveled coolant into cylinders 2and 3. Almost 8,000 dollars later, a new motor. In my Opinion, the cost of the actual motor should be free, or at least less then 2,700. I do not think it's very fair for Ford to profit from their own defective design. Thanks.

Coolant intrusion into cylinder number 2 is beginning occur on my 2.0l ecoboost engine. I know this because I am getting misfire codes for cylinder 2, losing coolant in the reservoir that I have to replenish, and seeing white smoke coming out of the exhaust. Ford acknowledged that this engine has a design flaw that allows for coolant to enter the cylinders over time and gave the solution of replacing the long block, as stated in Technical Service Bulletin 22-2229. With the 2.0 engine suffering from the same design flaw that the 1.5l ecoboost engine suffers from, Ford created a recall for the 1.5l engine to replace the long block, as stated in the Customer Satisfaction Program 21N12. Since this sets a precedent that this flaw needs to be recalled and replaced by a newly designed long block, it should mean that all engines that suffer from the same design...

My situation started with pulling the car out of the garage one morning going to work. Shaking was experienced, after a couple of times with that happening, one morning heading out for work the light came on the dashboard, I immediately setup an appointment with AAA, who once started working on the car felt they had resolved the issue, however the same day I drove off the premises for AAA the light came back on, I ended up taking the car back to them four times before they stated they could not resolve the problem and suggested I take it to Ford, which I did. Once there I was informed by the advisor the car was in recall and they would provide me with a loaner until repairs were done. I drove the loaner for two weeks only to be called by the advisor and informed that my car would...

Transmission went out and is the same year make and model of the customer satisfaction program 22n12. Spoke with Ford and they stated since its not the ECO model they cannot honor the recall although they have the same transmission parts.

The contact owns a 2019 Ford Fusion. The contact stated while driving 40 MPH the contact heard an abnormal rattling sound coming from the vehicle. The contact stated this rattling sound was also heard when the vehicle was idling. No warning lights illuminated. The vehicle was taken to the dealer and diagnosed with a cracked flex plate. The contact was informed that the flex plate needed to be replaced. The vehicle was not repaired, yet. The manufacturer was made aware of the failure and referred the contact to NHTSA Hotline. The failure mileage was approximately 47,000.

Radiator fluid leaking into cylinder 3, causing misfire. Has been a persistent and common issue with the 2.0L Ecoboost engines.

The flywheel or flex plate cracked. Been to different mechanics, some stating I need a whole new transmission.

The contact owns a 2019 Ford Fusion. The contact stated on several occasions while driving at various speeds, the vehicle lost motive power while shifting gear and failed to exceed 40 MPH. Additionally, the contact stated that when the vehicle was started, the vehicle started shaking abnormally. The check engine warning light was illuminated. The vehicle was taken to an Auto Parts Store to be diagnosed. The contact was notified of a misfire in cylinder #2. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 59,000.

My fusion wont start and i have to let it sit for hours before it will start. I thought it was battery but had that replaced and had whole car checked and the firestone could find no reason why it wasnt starting. The engine light and battery showed up when it doesnt start but sends no error codes. Today i had to tow my car because me and my family pulled over to eat and got back in the car and it didnt start. This is the first time but what made it worse was having my kids in the car stuck in a part of town. I have exhausted every resource to try to figure out this problem but there is nothing. I think the cars ecu is faulty or something because it wont start again but if i wait for hours it will maybe start back up but...

I was driving down the road, and a wrench symbol came on. Once i cut the car off and drive it the next day the symbol was off. I looked the symbol up online and it stated that it had to due with the powertrain. I made an appointment to the ford dealership here for diagnostic. They just called me and informed me that the vehicle has codes for misfire on start up and a coolant pump issue and that it is leaking into the engine walls. I am very displeased about this issue because I've only had the car for 2 years.

ENGINE KEEPS HAVING MISFIRE ISSUES. TAKEN TO GARY CROSSLEY FORD IN APRIL OF 2021 AND WARRANTIED ENGINE REPLACEMENT. IN MARCH 2022 TAKEN TO THROUROUGHBRED FORD ENGINE WENT BAD AGAIN WITH ANTIFREEZE LEAKING INTO THE OIL , ENGINE REPLACED AGAIN. HERE WE ARE IN DECEMBER 2023 AND HAVING SAME ISSUES. AND THOROUGHBRED FORD IS BACKED UP UNTIL MARCH OF 2024 AND CANT FIX THE ENGINE AGAIN UNTIL THEN. SO I AM PAYING MY CAR PAYMENT AND HAVE NO CAR TO DRIVE. I BOUGHT THIS CAR BRAND NEW WITH ZERO MILES AND HAVE HAD NOTHING BUT ISSUES WITH THE ENGINE.

My car Transmission started to make a Rattling Noise while leaving a store. While on the highway, far left lane going 65mph, all of a sudden the car slowed rapidly with traffic all around me traveling 65+mph. I had to get over 3 lanes to exit the highway going 25. I was almost hit several times by vehicles going 65+. This could have caused a deadly accident. Luckily I made it to the exit without a collision. The South Belleville Ford dealership inspected the car and said the flexplate was cracked. I found out from Ford that they put out a Customer Satisfaction Program repair for the same flexplate my car is equipped with, covering the cost of repair and a rental vehicle at 100% but my vehicle, even though it was manufactured during the time specified and at the assembly plant specified with the specified transmission and flexplate, it...

The contact owns a 2019 Ford Fusion. The contact stated that while her son was driving at 50 MPH, the check engine warning light illuminated. The vehicle was taken to an independent mechanic where it was diagnosed that the spark plugs needed to be replaced. The vehicle was repaired but the check engine warning light remained illuminated. Additionally, the contact stated that when the accelerator pedal was depressed the vehicle began jerking. The vehicle was taken to the same independent mechanic where it was diagnosed that coolant leaked into the cylinder and the engine needed to be replaced. The vehicle was not repaired. The vehicle was then taken to a dealer where it was determined that the engine needed to be replaced. The vehicle was not repaired. The failure mileage was approximately 81,000.

I put car into park to use the atm and then could not get it back into gear it gave a lot of different issues system fault error oil pressure errors battery error collision error and I ended up replacing the gear shift bushing which had deteriorated and broke off and that fixed most of issues now car makes loud blaring alarm sound that is not the normal car dinging it's loud and high pitched and acts like my battery is dead but won't start or shows any signs it is being jumped. Like the battery is completely dead won't take or hold charge.

My car in February of 202: got stuck in park they said it was electrical issue, then months later I ended up with a coolant leak that then combusted my engine. New engine in August of 2023 fast forward to November 2023 my car is doing the same thing it stalled in the road with myself and newborn in the car, lost all speed and now it will not go in drive or reverse just like it did in February of 2023. It’s been in the shop twice and now ongoing it’s third time and I find this to be a severe issue because if my car is going to keep stalling while driving there is no reason to keep fixing this car. I’m aware past fusion’s have been recalled for something of similar problems so it makes me wonder if this should be recalled as well.

The contact owns a 2019 Ford Fusion. The contact stated while driving approximately 45 MPH, the check engine warning light illuminated. The vehicle was taken to a dealer and was diagnosed with coolant intrusion into the engine. The contact was informed that the engine needed to be replaced. The vehicle was repaired. The manufacturer was notified of the failure. The failure mileage was 85,003.

The contact owns a 2019 Ford Fusion. The contact stated that while driving at 65 MPH, the vehicle lost motive power while driving uphill. The contact stated that the front of the vehicle had started shaking uncontrollably. No warning light was illuminated. The vehicle had not been diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 45,411. The VIN was not available.

Coolant intrusion into cylinder bore. Which can cause a fire. I been submitting complaints and haven’t heard anything back in regards to my complaint. This was a known issue with ford back then.

Coolant leaked in cylinder wall

Coolant leaked into short block

Coolant leaking into cylinder 3. Took to dealership, apparently there’s a flaw in the engine design. Included all ford fusions apparently. How is this not a recall? When it’s clearly Fords fault for this, not the consumers.

I only have 109,000 miles and I am needing a new engine. They are telling me that the cylinder wall is cracked and something about a blockage. I cannot afford to replace it. They are telling me it’s a known issue with ford but there’s no recall and that’s why they discontinued the ford fusion.

My car started running weird, it would shake when at idle. It did this for about a week before the check engine light came on. I took my car to a mechanic and they determined the head gasket was bad. I took my car to a ford dealership for confirmation of the problem. They confirmed I had a bad head gasket. My safety is put at risk because this can cause engine failure. If my engine failed in the middle of the highway that would be extremely dangerous.

The contact owns a 2019 Ford Fusion. The contact stated while driving approximately 30-35 MPH, the check engine warning light illuminated. The contact stated that the failure recurred while driving. Additionally, the vehicle lunged forward but failed to respond upon depressing the accelerator pedal. The contact was able to pull to the side of the road. The vehicle was towed to the local Pep Boys, where the ignition coils #3 and #4 were replaced; however, the failure persisted. The vehicle was taken to an independent mechanic, where ignition coil #4 was replaced; however, the failure persisted. The independent mechanic replaced spark plugs #1, #2 and #3. The number four spark plug was stuck and was not removed. The vehicle was taken to the dealer, where it was diagnosed and determined that the cylinder head needed to be replaced. The manufacturer was notified of the failure, but no assistance was provided....

Smoke coming from engine and exhaust pipe Overheating Coolant consumption issues Engine misfire and damage Total engine failure Safety was put at risk, the engine could have failed on a major highway. The problem is confirmed by Ford and did not cover the total cost of repair Car still runs terrible

The contact owns a 2019 Ford Fusion. The contact stated that the vehicle was taken to the dealer for a recommended maintenance inspection; however, the contact stated that upon the technician inspecting the vehicle, the contact was informed that the engine short block needed to be replaced due to coolant intrusion into the engine. The vehicle was not repaired. The vehicle was not repaired. The manufacturer was notified of the failure and the contact was informed that the vehicle was out of warranty. The contact was informed to draft a letter for assistance. No further assistance was provided. The failure mileage was 119,000.

The contact owns a 2019 Ford Fusion. The contact stated while starting the vehicle the check engine warning light illuminated. The vehicle was taken to an independent mechanic who stated that coolant was leaking into cylinder #2 and that the spark plug needed to be replaced along with the coil. The spark plugs and ignition coils were replaced but the failure reoccurred. The vehicle was taken to the independent mechanic and the codes were reset but the failure reoccurred. The vehicle was taken back to the independent mechanic who stated that coolant was leaking into the cylinder causing the spark plug to misfire. The dealer was contacted and stated that there was a Customer Satisfaction Program issued but the VIN was not included. The vehicle was not repaired. The manufacturer was contacted, and a case was filed. The contact was referred to the NHTSA Hotline. The failure mileage was 89,000.

The contact owns a 2019 Ford Fusion. The contact stated while his daughter was driving approximately 40-45 MPH, the check engine warning light illuminated, and the vehicle went into LIMP mode. The contact stated that the vehicle failed to exceed 5 MPH. The contact's daughter pulled into a parking lot. The contact stated that he used an OBD reader to determine that cylinder #2 was misfiring. The vehicle was taken to the Chevrolet dealer where it was purchased, and was diagnosed with coolant intrusion into the engine, causing cylinder #2 to misfire. The contact was informed that the engine needed to be replaced. The vehicle was taken to a Ford dealer, where the diagnostic result was confirmed. The vehicle was not repaired. The manufacturer was notified of the failure and informed the contact that the vehicle was not covered under Ford Campaign Number: 21N12. The manufacturer referred the contact to...

The contact owns a 2019 Ford Fusion. The contact stated that the check engine warning light illuminated. The contact's friend used an ODB code reader and determined that there was a misfire in cylinder #3. The ignition coils were replaced; however, the failure persisted. The contact also discovered that the coolant level remained low. The vehicle was then taken to a dealer for a diagnostic test where it was determined that coolant had leaked into cylinder #3 and that the long block needed to be replaced. The manufacturer was notified of the failure. The vehicle was not repaired due to parts being on backorder. The failure mileage was approximately 76,000.

Last year my car started overheating for no apparent reason checked coolant reservoir and visibly seemed empty but when I removed the cap antifreeze rose fast. Added antifreeze and it stopped overheating. About 3 months ago Because it overheated I had to get the head gasket replaced, timing components replaced, heads repaired, and engine flushed(antifreeze had entered engine), not to mention labor all costing roughly $3,000. Only for it to happen again and now I’m out of $3,000 because the same thing is happen only this time my car is shaking and smoking from the tail pipe badly. In the mean time my fiancé has lost his job due to us not being able to drive the car. After doing god knows how much research to find out this is an ongoing problem with this particular make of car. Because of having to pay for countless repairs and no one...

Overheating and coolant leaking Into cylinder block causing misfire in engine. Could cause stalls and potentially a fire from overheating. Known issue from Ford they are only offering to repair up to a certain. Mileage

Coolant Intrusion. Coolant is leaking into the head gasket, causing car to say coolant running hot. Also causes car to lose speed. There was a recall for this same model, a month before my model was built, but clearly the problem was never fixed.