2008 CHEVROLET EXPRESS 1500 — Problems, Recalls & Safety Data

The brake system completely failed. the peddle goes to the floor. there is still fluid in the reservoir to proper level but all brakes failed at the same time no stopping ability. had to use parking break to slow and down shift to first gear. This flaw could have killed or injured every passenger/occupant (s) as well as harmed other drivers on roadway/motorway. There should be some type of safety measure to aid in stopping even if a partial failure. But this is a whole system failure. Please advise

WE'VE COMPLAINED NUMEROUS TIMES ABOUT THE BRAKES. AFTER HAVING A COMPLETE BRAKE REHAB ON JULY 7TH, 2017, I EXPERIENCED A COMPLETE BRAKE FAILURE ON FEB. 2ND, 2018 LOSING ALL BRAKES INSTANTLY AS I APPROACHED A 6 LANE INTERSECTION. I CONTACTED THE OWNER OF THE DEALERSHIP BOTH BY PHONE AND EMAIL AND DID NOT RECEIVE ANY RESPONSE. I WAS TOLD THAT A HOSE OR TUBING WAS RUBBING AGAINST THE BRAKE LINES CAUSING AN ABRUPT LOSS OF FLUID? WHY THIS WAS NOT NOTICED DURING THE EARLIER BRAKE WORK SEEMS QUESTIONABLE. MOREOVER, I AM OUT HUNDREDS OF DOLLARS FOLLOWING THE EARLIER BRAKE WORK THAT TOTALED ABOUT ONE THOUSAND DOLLARS JUST 7 MONTHS PREVIOUS. TO THIS DAY THE BRAKES FEEL "MUSHY" AND I HAVE NO CONFIDENCE IN THE WORK DONE TO SOLVE THE PROBLEM.

PURCHASED THIS VEHICLE IN ORDER TO TRAVEL WITH PASSENGERS BUT ON MY FIRST ATTEMPT THIS HOLIDAY DISCOVERED THE SEAT BELTS WILL NOT EXTEND ENOUGH TO ACCOMMODATE MOST PASSENGERS. I CAN NOT AFFORD TO REPLACE THEM NOR DO I WANT TO BE LEGALLY CHARGED WITH UNLAWFUL EQUIPMENT (OR RESPONSIBLE FOR HARM TO ANYONE IN MY VEHICLE). THIS IS MY FIRST TIME DEALING WITH SUCH A DILEMMA AND WOULD APPRECIATE ANY INPUT THAT THE COMPANY MAY ADVISE. IS THIS AN OVERSITE ON THE MANUFACTURER TO BUILD A VEHICLE THAT WILL NOT MEET REGULATIONS?

VEHICLE HAD AN ELECTRONICALLY FAILED FRONTAL CRASH SENSOR.I PURCHASED A NEW PART FROM GM.THE PART WAS INSTALLED AND THE CONNECTOR WOULD NOT FIT IN.I CHECKED THE ALIGHNMENT OF SLOTS AND THE CONFIGURATION MATCHED THE OLD ONE. UPON FURTHER INVESTIGATION I NOTICED THE MOLD OF THE PLASTIC WAS DISTORTED.CHECKING THE ORIGIN OF THIS PART (MADE IN SINGAPORE).MY THOUGHTS ARE THAT IF THERE NOT TESTING THE FIT,HOW CAN WE BE SURE THAT IN THE EVENT OF A CRASH IT WOULD EVEN SEND THE SIGNAL TO DEPLOY THE AIR BAG.EVEN THOUGH THE SDM UNIT CHECKS THE RESISTANCE VALUE AND OK'S THE PART AS BEING GOOD.ALSO I AM AN ASE CERTIFIED MASTER TECH WITH 34 YEARS EXPERIENCE.I JUST AM UPSET THAT THE PROFIT MARGIN SHOULD PLAY A ROLE IN VEHICLE PASSENGER SAFETY.

THE WHITE FACTORY PAINT IS CHIPPING OFF ON SEVERAL PARTS OF THE VEHICLE, EXPOSING THE PRIMED SHEET METAL. THERE WAS NO REPAINT DONE ON THIS VEHICLE BEFORE. THE VEHICLE HAS BEEN SERVICED AND TAKEN CARE OF REGULARLY AS RECOMMENDED BY GM. THE DEFECT IS A 100% FACTORY PROBLEM IN THE PAINT SHOP. IT APPEARS THAT THE PAINT DOES NOT ADHERE TO THE PRIMER. *TR