Technical Service Bulletin SSM 47886 — 2016 FORD F-250 SD
ELECTRICAL SYSTEM
Bulletin Details
| TSB ID | SSM 47886 |
| Manufacturer | |
| Vehicle | 2016 FORD F-250 SD |
| Component | ELECTRICAL SYSTEM |
| Communication Date |
Bulletin Summary
Some 2012-2016 F-Super Duty vehicles may exhibit a battery cable clamp corrosion concern at the positive battery terminal. It is not necessary to replace the complete battery cable harness CC3Z-14300-A for this concern. Positive battery cable clamp BT4Z-14450-AA is available and can be used to replace just the corroded terminal. Do not cut or shorten the battery cable, but instead remove the corroded battery cable clamp and clean the cable end as necessary. Bend the new battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2016 FORD F-250 SD
SSM 50449
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
21M01
ENGINE AND ENGINE COOLING
SSM 49844
POWER TRAIN
21N05
EQUIPMENT
21N06
ELECTRICAL SYSTEM
TSB19-2143
ENGINE AND ENGINE COOLING
18N03-S2
LATCHES/LOCKS/LINKAGES:DOORS:LATCH
SSM 47402
FUEL SYSTEM, DIESEL
17B29
EQUIPMENT
17-2234
ELECTRICAL SYSTEM