Technical Service Bulletin SSM 47576 — 2016 FORD EDGE
ENGINE
Bulletin Details
| TSB ID | SSM 47576 |
| Manufacturer | |
| Vehicle | 2016 FORD EDGE |
| Component | ENGINE |
| Communication Date |
Bulletin Summary
Some 2015-2018 Edge vehicles equipped with a 2.0L EcoBoost engine may exhibit a rattle noise at idle. This may be due to a flexplate crack around the crankshaft. To resolve this concern, verify that the flexplate is cracked around the crankshaft using the inspection plate and a mirror. If the flexplate is cracked, replace the transmission fluid pump, flexplate, flexplate bolts and torque converter. Refer to Workshop Manual (WSM), Section 303-01A and 307-01. When replacing the torque converter, ensure that the torque converter pilot hub is lubricated with Multi-Purpose Grease XL-5-A (ESB-M1C930-B) prior to reassembly. For claiming, use causal part 6375 and applicable labor operations in Section 06 of the Service Labor Time Standards (SLTS) Manual.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2016 FORD EDGE
SSM 54504
FUEL/PROPULSION SYSTEM
22N12
POWER TRAIN
TSB 20-2212
ENGINE AND ENGINE COOLING
TSB 19-2236
EQUIPMENT
19B04-S1
STEERING:AUTOMATED/ADAPTIVE STEERING
19B04
STEERING: STEERING WHEEL/HANDLE BAR
SSM 47398
EQUIPMENT
TSB18-2097
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
SSM 47041
ELECTRICAL SYSTEM:SOFTWARE
TSB17-0056
STRUCTURE:BODY:DOOR