Technical Service Bulletin SSM 47398 — 2016 FORD EDGE
EQUIPMENT
Bulletin Details
| TSB ID | SSM 47398 |
| Manufacturer | |
| Vehicle | 2016 FORD EDGE |
| Component | EQUIPMENT |
| Communication Date |
Bulletin Summary
Some 2015-2018 Edge vehicles equipped with a 2.0L EcoBoost and 6F35 transmission may exhibit a rattle noise from the transmission bellhousing area while running. This may be the result of a cracked engine flexplate. When replacing the flexplate, lubricate the torque converter pilot hub with Multi-Purpose Grease XL-5-A (ESB-M1C93-B) before reassembling. Make sure the transmission locator dowel pins are correctly installed. If the dowel pins were pulled out of the engine block, new dowel pins will need to be installed in the engine block. Failure to do so could result in a repeat repair. Refer to Workshop Manual (WSM), Section 307-01A. Engineering is investigating, monitor OASIS for updates. To assist with the investigation use the Report a Vehicle Concern link at the bottom of the OASIS report and fill out the form.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2016 FORD EDGE
SSM 54504
FUEL/PROPULSION SYSTEM
22N12
POWER TRAIN
TSB 20-2212
ENGINE AND ENGINE COOLING
TSB 19-2236
EQUIPMENT
19B04-S1
STEERING:AUTOMATED/ADAPTIVE STEERING
19B04
STEERING: STEERING WHEEL/HANDLE BAR
SSM 47576
ENGINE
TSB18-2097
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
SSM 47041
ELECTRICAL SYSTEM:SOFTWARE
TSB17-0056
STRUCTURE:BODY:DOOR