Technical Service Bulletin 9100607 — 2024 RAM 2500
ELECTRICAL SYSTEM
Bulletin Details
| TSB ID | 9100607 |
| Manufacturer | |
| Vehicle | 2024 RAM 2500 |
| Component | ELECTRICAL SYSTEM |
| Communication Date |
Bulletin Summary
"MODULE Transfer Case Control If DTC C2112 is set in the DTCM module refer to complete diagnostics in Service Library, it has been seen this is primarily caused by a wiring issue. Please inspect all wiring, wiring connections and drive the vehicle in the conditions that set this fault according to the environmental data. Conduct the following test drive to recreate the condition to get the DTC to go active, - Shift from 2WD to 4HI (drive > 2 mins) - Shift from 4HI to 4LO (drive > 2 mins) - Shift from 4LO to 4HI (drive > 2 mins) - Shift from 4HI to 2WD (drive > 2 mins) Note: Inspect and confirm no corrosion present at the FAD connector If DTCM is still suspected to be at fault proceed with repair."
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2024 RAM 2500
S2508000107
SEATS
108410
UNKNOWN OR OTHER
08-350-25
ELECTRICAL SYSTEM
23-006-25 REV. B
STRUCTURE:BODY
21-012-25 REV. D
POWER TRAIN
S2503000003
ELECTRICAL SYSTEM
S2505000002REVA
SERVICE BRAKES
S2505000002REVA
ELECTRICAL SYSTEM
21-012-25 REV. C
POWER TRAIN
21-031-25
ENGINE