NHTSA Complaint #11699514 — 2020 JEEP GLADIATOR

The digital instrument cluster in my 2020 Jeep Gladiator has failed. The center display (LCD) went completely black, even though the backlight still glows faintly. This screen typically displays critical information such as vehicle speed, warnings, messages, and alerts. Without this display, I cannot monitor key safety information while driving. The analog gauges still function, but the central digital panel remains blank regardless of ignition mode (RUN or ON). After diagnosing the issue myself, I confirmed power was present at the fuse terminals. I inspected and replaced fuse F36, which was damaged and likely contributed to the display losing power or shorting. I also inspected related fuses F43 and F57 (BCM and IOD power supply), which were intact. This is not an isolated problem. Research shows that other Jeep Gladiator owners (especially 2020 models) are experiencing identical symptoms — black instrument displays, “Push Brake to Start” messages that stay on after shutdown, and modules not entering proper sleep mode. These issues align with the symptoms listed in TSB 08-002-21A, which relates to software and communication faults between the BCM and IPC. Jeep dealership confirmed the failure and quoted $700–$1,000 for full cluster replacement, stating there are no DTC codes and no reflash updates available, and that the cluster must be replaced outright. Jeep has not issued a recall, yet this is clearly a widespread failure affecting visibility and safety of vehicle operation. The problem poses a safety risk to myself and others. I cannot see alerts or diagnostic messages while driving. If this happened at night or during highway travel, it could increase accident risk. Jeep should issue a recall or warranty coverage extension for the instrument cluster failure in affected 2020 Gladiators.