NHTSA Complaint #11594420 — 2012 VICTORY CROSS ROADS

I pulled onto a main road through a busy intersection and shifted through the gears under normal load. Upon shifting from 4th into 5th gear one of the C clips failed causing devastating damage to the transmission gears. The bike jerked and locked up for a moment but I was able to keep it under control and slow down to a stop. There was no warning or symptoms up to this point. My safety and the safety of others were put at risk with this failure. I was fortunate enough to keep control of the bike to slow down. You can tell it is a c clip issue because after the failure, tilting the bike to the right results in a clacking sound of the gears smacking each other. I am a part of a large Victory online community and there are so many people having the same issue. Total engines are being grenaded due to Polaris’ use of a poor quality clip to hold the gears in place. Being that motor and transmission are one unit, it requires an entire engine tear down to split the engine case and access the damaged gears. These gears then have to be replaced and the failed clip upgraded to a better quality clip. Polaris needs to issue a recall on these c clips for the safety of everybody!