2019 SUBARU FORESTER Back Over Prevention Warnings Problems

While I was driving on a major road, the car appeared to sense an issue and automatically started to brake. While I was a road with 55mph drivers, my car was forcing me to stop. May warning light appeared; Eyesight Issue, Check Engine, Brake and many others. I was able to disengage the crash prevention manually and continue to drive. When I took it to my mechanic, he told me all the codes went to a Technical Service Bulletin for the Thermo Control Valve. He reset the codes and told me to take it to Subaru for an under warranty repair. Once I left the mechanic, I was travelling home and the car had the same issues, again while driving on a very busy road. This time I could not disengage the system, and I struggled to get the car over to the left shoulder. It was very narrow, and...

1) The seat is cracking on the drivers seat. The vehicle only has 64,000 miles on it. No word from Subaru. 2) Parking collision warning system works part of the time. Dangerous when the system does not detect a person or vehicle in the blind spot.

I recently bought this vehicle (used) with ~1900 miles. After 1.5 months of owning the vehicle, I suddenly had several warning lights as well as systems disabled within the vehicle. The first time this occurred I was about 2 hours into a drive, and suddenly my eyesight disabled, check engine light came on, cruise control disabled, lane departure disabled, collision warning and automatic braking disabled. After pulling over to inspect, I also realized my trunk would no longer open. I took it to a dealership who said it was due to low battery voltage—despite there being no spectacular incidents to drain the battery since I purchased the vehicle. They recharged the battery and the problem was temporarily fixed. However, once I retrieved my vehicle from the dealership the check engine light and disabled features were still prevalent. I once again had them recharge the battery—despite there again being no events...