2016 PIERCE LADDER AND PLATFORM — Problems, Recalls & Safety Data
N/A
Safety Rating
0
Owner Complaints
1
Recall
3
Service Bulletins
0
Investigations
Overview of the 2016 PIERCE LADDER AND PLATFORM
The 2016 PIERCE LADDER AND PLATFORM has received a total of 0 safety complaints filed with the National Highway Traffic Safety Administration (NHTSA). There has been 1 recall campaign affecting this vehicle, covering issues with STRUCTURE. 3 technical service bulletins have been issued by Pierce Manufacturing for this model year.
Recalls for the 2016 PIERCE LADDER AND PLATFORM
NHTSA has recorded 1 recall for the 2016 PIERCE LADDER AND PLATFORM, potentially affecting up to 5 vehicles.
Recall 23V407000 — STRUCTURE
| 5 vehicles affected
Defect: Pierce Manufacturing (Pierce) is recalling certain 2016-2022 Ascendant 107' Aerials and 110' Platforms mounted on single rear axle Enforcer chassis. The galvanized stabilizer beams may develop cracks.
Consequence: Cracks can cause instability when an aerial ladder or platform is elevated, increasing the risk of injury.
Remedy: Dealers will inspect and replace the galvanized stabilizer beams as necessary, free of charge. Owner notification letters were mailed June 14, 2023. Owners may contact Pierce customer service at 1-888-974-3723.
View full details →Owner Complaints for the 2016 PIERCE LADDER AND PLATFORM
No complaints have been filed with NHTSA for the 2016 PIERCE LADDER AND PLATFORM.
Safety Rating for the 2016 PIERCE LADDER AND PLATFORM
NHTSA has not yet tested the 2016 PIERCE LADDER AND PLATFORM in its New Car Assessment Program.
Technical Service Bulletins for the 2016 PIERCE LADDER AND PLATFORM
Pierce Manufacturing has issued 3 technical service bulletins (TSBs) for the 2016 PIERCE LADDER AND PLATFORM. TSBs are notices sent by manufacturers to their dealers describing a known issue and the recommended repair procedure.
SB_746 — UNKNOWN OR OTHER
Single axle tillers can be retrofitted to have a 91° jackknife angle, an improvement from the previous jackknife angle of 88°. New tillers are configured with this change as per Sales Bulletin PSB1063.
SB_732 — UNKNOWN OR OTHER
This bulletin provides a procedure by which to validate Command Zone device software versions in Pierce custom chassis apparatus.
PB_273.13 — ELECTRICAL SYSTEM
This is a procedure outlining the steps required to retro fit a fire apparatus that currently has a CZI HED, CZI Morey, or a CZII Morey display to the current production product – HED Color display. This process outlines all potential environments in which this is possible.
NHTSA Investigations for the 2016 PIERCE LADDER AND PLATFORM
There are no NHTSA defect investigations on record for this vehicle.
Other Model Years of the PIERCE LADDER AND PLATFORM
- 2016 PIERCE LADDER AND PLATFORM (current)
- 2017 PIERCE LADDER AND PLATFORM — 0 complaints
- 2018 PIERCE LADDER AND PLATFORM — 0 complaints
- 2019 PIERCE LADDER AND PLATFORM — 0 complaints
- 2020 PIERCE LADDER AND PLATFORM — 0 complaints
- 2021 PIERCE LADDER AND PLATFORM — 1 complaint
Other PIERCE Models
- PIERCE ARROW XT — 10 total complaints
- PIERCE DASH — 8 total complaints
- PIERCE IMPEL — 7 total complaints
- PIERCE SABER — 5 total complaints
- PIERCE QUANTUM — 3 total complaints
- PIERCE ARROW — 2 total complaints
- PIERCE ENFORCER — 2 total complaints
- PIERCE PUMPER — 2 total complaints