2002 NISSAN PATHFINDER — Problems, Recalls & Safety Data

My complaint relates to Campaign Number 07V435000 We are the original and only owner of this vehicle. While driving the vehicle I started to notice a fuel smell, after several attempts to locate the source, one day I added fuel, I noticed a small puddle in my driveway the following morning. I removed the wheel and the fender well cover to find the fuel filler neck had rotted through and fuel had wet both the tire and the brakes. The above campaign number has a recall the ends in the prior manufacturing year even though the part in question was used by the manufacturer through the 2004 model year. I repaired the vehicle and am now dealing with a constant check engine light due to a manufacturing defect that creates a large vacuum leak at the fuel cap. The part arrived with a notice that the leak is common and recommends replacement of the fuel cap. I replaced the cap and am having the same problem. I have retained the defective part should you wish to inspect it. I think the recall should be expanded to the entirety of the use of the defective part by the manufacturer, model year 2004. It would also be nice if the replacement part manufacturer was fined for selling a product they know to have defective manufacturing. Leak discovered 20 August 2023 at 153,789 miles Replacement part# FN748 from Spectra Premium ordered through Amazon

This relates to Campaign Number 11V244000 We are the original and only owners of the vehicle I originally brought the vehicle in for the recall and they simply sprayed some undercoating in the wheel wells. Less than a month later both strut towers separated from the body of the vehicle while my wife was driving home, she lost steering and could have had a serious or fatal accident. I towed to the dealer and they installed braces in both strut towers. I have always taken exceptional care of my vehicles, which includes multiple washes during winter months and extensive undercarriage washing every spring. This past Oct when I took the vehicle in for mandatory state inspection I was informed that the vehicle would not pass inspection next year. They told me this once before in relation to extensive rust to the passenger side rear frame next to the muffler. I was able to cut out the rust and weld a thicker plate of steel in there to repair the frame. I just changed my oil and looked for what the mechanic was referring too. This time the rust is between the braces they installed for the struts and the front of the wheel well. The mechanic saw the rust coming through the paint and poked at it with a screw driver, the screw driver went right though the body leaving significant holes in the structure that supports the struts. When the weather breaks I will further inspect to determine if there is enough good metal left for me to attempt a repair. I am doubtful a repair will be possible as the metal used to construct this vehicle is very poor quality. Despite my constant care, washing, rust conversion treatments, painting with rust blocking paint and using undercoating, every inch on the underside of the vehicle is rusted. Both rear quarters rotted behind the wheel flares and down into where the rear doors close and contact the rear quarters. Now due to Nissan's decision to use substandard metal I am forced to buy a new vehicle which is currently financially impossible

This relates to Campaign Number 11V244000 We are the original and only owners of the vehicle I originally brought the vehicle in for the recall and they simply sprayed some undercoating in the wheel wells. Less than a month later both strut towers separated from the body of the vehicle while my wife was driving home, she lost steering and could have had a serious or fatal accident. I towed to the dealer and they installed braces in both strut towers. I have always taken exceptional care of my vehicles, which includes multiple washes during winter months and extensive undercarriage washing every spring. This past Oct when I took the vehicle in for mandatory state inspection I was informed that the vehicle would not pass inspection next year. They told me this once before in relation to extensive rust to the passenger side rear frame next to the muffler. I was able to cut out the rust and weld a thicker plate of steel in there to repair the frame. I just changed my oil and looked for what the mechanic was referring too. This time the rust is between the braces they installed for the struts and the front of the wheel well. The mechanic saw the rust coming through the paint and poked at it with a screw driver, the screw driver went right though the body leaving significant holes in the structure that supports the struts. When the weather breaks I will further inspect to determine if there is enough good metal left for me to attempt a repair. I am doubtful a repair will be possible as the metal used to construct this vehicle is very poor quality. Despite my constant care, washing, rust conversion treatments, painting with rust blocking paint and using undercoating, every inch on the underside of the vehicle is rusted. Both rear quarters rotted behind the wheel flares and down into where the rear doors close and contact the rear quarters. Now due to Nissan's decision to use substandard metal I am forced to buy a new vehicle which is currently financially impossible

This relates to Campaign Number 11V244000 We are the original and only owners of the vehicle I originally brought the vehicle in for the recall and they simply sprayed some undercoating in the wheel wells. Less than a month later both strut towers separated from the body of the vehicle while my wife was driving home, she lost steering and could have had a serious or fatal accident. I towed to the dealer and they installed braces in both strut towers. I have always taken exceptional care of my vehicles, which includes multiple washes during winter months and extensive undercarriage washing every spring. This past Oct when I took the vehicle in for mandatory state inspection I was informed that the vehicle would not pass inspection next year. They told me this once before in relation to extensive rust to the passenger side rear frame next to the muffler. I was able to cut out the rust and weld a thicker plate of steel in there to repair the frame. I just changed my oil and looked for what the mechanic was referring too. This time the rust is between the braces they installed for the struts and the front of the wheel well. The mechanic saw the rust coming through the paint and poked at it with a screw driver, the screw driver went right though the body leaving significant holes in the structure that supports the struts. When the weather breaks I will further inspect to determine if there is enough good metal left for me to attempt a repair. I am doubtful a repair will be possible as the metal used to construct this vehicle is very poor quality. Despite my constant care, washing, rust conversion treatments, painting with rust blocking paint and using undercoating, every inch on the underside of the vehicle is rusted. Both rear quarters rotted behind the wheel flares and down into where the rear doors close and contact the rear quarters. Now due to Nissan's decision to use substandard metal I am forced to buy a new vehicle which is currently financially impossible

The contact owns a 2002 Nissan Pathfinder. The contact stated that the vehicle was previously serviced at a local dealer under NHTSA Campaign Number: 11V244000 (Steering, Suspension); however, the mechanic diagnosed that there was no rust in the strut housing assembly. The contact then stated that when he replaced the front struts, excessive rust was seen in the strut housing assembly. The contact stated that the vehicle was taken to multiple independent mechanics, who diagnosed that the front axle needed to be replaced and confirmed there was excessive rust in the strut housing. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was 147,477.