1999 MERCEDES BENZ ML430 — Problems, Recalls & Safety Data

DECEMBER 11, 2013 I WAS DRIVING HOME FROM WORK MY BENZ QUIT ON ME IN THE ROAD WOULD NOT START BACK (MY HOME IS WITHIN 2 MILES OF MY WORK) THE DAY BEFORE IT HAD QUIT AS I WAS MAKING A TURN BUT RESTARTED A COUPLE OF DAYS PRIOR I HAD THE CAR WARMING AND IT SHUT OFF WHILE WARMING UP BUT RESTARTED. THERE WAS NO LIGHTS ON THE INSTRUMENT DASH PANEL LIT OR STAYING LIT. AFTER SOME INTERNET INVESTIGATING I ASSUME IT WAS THE CRANKSHAFT POSITION SENSOR AS IT HAD ALL THE SIGNS THAT OTHERS HAVE HAD I PURCHASED ONE FOR THE REPAIR SHOP TO INSTALL. THEY HAVE INSTALLED IT BUT BELIEVE THERE IS A PROBLEM WITH THE CRANKSHAFT SO I AM NOT CURRENTLY DRIVING IT. I AM AFRAID TO DRIVE IT WITH IT QUITTING WITHOUT ANY TYPE OF WARNING. MY BENZ HAS LESS THAN 65K I DON'T HAVE THE CURRENT MILEAGE WITH ME AT THIS TIME BUT IF IT IS NEEDED PLEASE LET ME KNOW. *TR

DECEMBER 11, 2013 I WAS DRIVING HOME FROM WORK MY BENZ QUIT ON ME IN THE ROAD WOULD NOT START BACK (MY HOME IS WITHIN 2 MILES OF MY WORK) THE DAY BEFORE IT HAD QUIT AS I WAS MAKING A TURN BUT RESTARTED A COUPLE OF DAYS PRIOR I HAD THE CAR WARMING AND IT SHUT OFF WHILE WARMING UP BUT RESTARTED. THERE WAS NO LIGHTS ON THE INSTRUMENT DASH PANEL LIT OR STAYING LIT. AFTER SOME INTERNET INVESTIGATING I ASSUME IT WAS THE CRANKSHAFT POSITION SENSOR AS IT HAD ALL THE SIGNS THAT OTHERS HAVE HAD I PURCHASED ONE FOR THE REPAIR SHOP TO INSTALL. THEY HAVE INSTALLED IT BUT BELIEVE THERE IS A PROBLEM WITH THE CRANKSHAFT SO I AM NOT CURRENTLY DRIVING IT. I AM AFRAID TO DRIVE IT WITH IT QUITTING WITHOUT ANY TYPE OF WARNING. MY BENZ HAS LESS THAN 65K I DON'T HAVE THE CURRENT MILEAGE WITH ME AT THIS TIME BUT IF IT IS NEEDED PLEASE LET ME KNOW. *TR

AFTER EXITING THE FREEWAY I NOTICED A LOUD EXHAUST SOUND COMING FROM UNDERNEATH THE CAR. AFTER PULLING OVER IOOKED UNDERNEATH THE CAR ANT THE FRONT DRIVER'S SIDE CATALYTIC CONVERTER SPLIT IN HALF ALONG THE WELDS. *TR BASICALLY, THE EXHAUST IS VENTING DIRECTLY TO THE OPEN AIR WITHOUT GOING THROUGH THE EMISSION SYSTEM. THE LEFT SIDE EXHAUST NOT HOLDING TOGETHER CORRECTLY. I THEN FOUND THAT MY CAR HAS A MANUFACTURER DEFECT: MERCEDES-BENZ USA, LLC AND DAIMLERCHRYSLER AG SETTLEMENT (EPA) AFFECTED VEHICLES: THE FOLLOWING VEHICLES HAVE BEEN RECALLED TO INSPECT AND REPLACE, IF NECESSARY, THE CATALYTIC CONVERTER: 1999-2001 MERCEDES BENZ ML 320 (VIN RANGE A036519-A260405) 1999 -2001 MERCEDES BENZ ML 430 ( VIN RANGE A057639-A260575) THERE IS NO MILEAGE LIMIT OR TIME LIMIT FOR THIS REPAIR/REPLACEMENT. I AM AN OWNER OF THE AFFECTED VEHICLE BUT THE DEALER WILL NOT FIX THE PROBLEM. HOW DO I PROCEED TO GET THIS VIOLATION REPAIRED? CAN YOU PLEASE POINT ME IN THE RIGHT DIRECTION? THIS IS A HEALTH/SAFETY ISSUE. THANK YOU, SCOTT

THE BRAKELINES RUSTED THROUGH CAUSING A COMPLETE LOSS OF FLUID AND THE ABILITY TO STOP THE CAR. *TR

TL* THE OWNS A 1999 MERCEDES-BENZ ML 430. THE CONTACT STATED WHILE DRIVING 25 MPH THE CATALYTIC CONVERTER STARTING MAKING A NOISE AND LEAKING. THE CONTACT TOOK THE VEHICLE TO A LOCAL MECHANIC AND THE MECHANIC NOTICE THE WELDING WAS CRACKING. THE MECHANIC PULLED UP A RECALL AND SUGGESTED THE CONTACT TAKE THE VEHICLE TO THE DEALER. THE CONTACT TOOK THE VEHICLE TO THE DEALER FOR THE RECALL REMEDY REPAIR AND THE DEALER STATED DUE TO THE VIN NUMBER, THE VEHICLE IS NOT INCLUDED IN THE RECALL. THE DEALER SUGGESTED TO THE CONTACT THAT HE CALL MANUFACTURER. THE CONTACT CALLED THE MANUFACTURER AND THEY INFORMED THE CONTACT THEIR IS NOTHING THEY CAN DO AND THE RECALL CAMPAIGN IS CLOSED. THE CONTACT STATED THE MANUFACTURER SHOULD BE RESPONSIBLE FOR THE RECALL. THE FAILURE MILEAGE WAS 98,000.