2002 MAZDA TRIBUTE — Problems, Recalls & Safety Data

The contact owns a 2002 Mazda Tribute. The contact stated that the check engine warning light was illuminated. Additionally, the contact stated that while driving at various speeds, the transmission was shifting erratically and made an abnormal rumbling sound. The contact stated that the vehicle hesitated to respond and was jerking upon depressing the accelerator pedal. The contact who is an independent mechanic had replaced the transmission speed sensor, the transmission shift position sensor, the vehicle speed sensor, the shift solenoid block, the transmission fluid, the transmission clutch solenoid, and the wheel speed sensor; however, the failure persisted. The contact used an OBD scanner and retrieved DTC codes indicating that the ABS wiring was overheating. The contact later became aware that the VIN was included in NHTSA Campaign Number: 12V016000 (Service Brakes, Hydraulic). The vehicle was taken to the dealer for the recall repair; however, the dealer bypassed the ABS module. The contact stated that while driving 40 MPH to the residence after the repair, the failure recurred. The contact stated that the recall repair did not involve bypassing the ABS module. The dealer was contacted, but no further assistance was provided. The vehicle was not repaired. The manufacturer was notified of the failure, and several cases were opened; however, no assistance was provided. The failure mileage was approximately 162,000.

The contact owns a 2002 Mazda Tribute. The contact stated that the check engine warning light was illuminated. Additionally, the contact stated that while driving at various speeds, the transmission was shifting erratically and made an abnormal rumbling sound. The contact stated that the vehicle hesitated to respond and was jerking upon depressing the accelerator pedal. The contact who is an independent mechanic had replaced the transmission speed sensor, the transmission shift position sensor, the vehicle speed sensor, the shift solenoid block, the transmission fluid, the transmission clutch solenoid, and the wheel speed sensor; however, the failure persisted. The contact used an OBD scanner and retrieved DTC codes indicating that the ABS wiring was overheating. The contact later became aware that the VIN was included in NHTSA Campaign Number: 12V016000 (Service Brakes, Hydraulic). The vehicle was taken to the dealer for the recall repair; however, the dealer bypassed the ABS module. The contact stated that while driving 40 MPH to the residence after the repair, the failure recurred. The contact stated that the recall repair did not involve bypassing the ABS module. The dealer was contacted, but no further assistance was provided. The vehicle was not repaired. The manufacturer was notified of the failure, and several cases were opened; however, no assistance was provided. The failure mileage was approximately 162,000.

The contact owns a 2002 Mazda Tribute. The contact stated that the check engine warning light was illuminated. Additionally, the contact stated that while driving at various speeds, the transmission was shifting erratically and made an abnormal rumbling sound. The contact stated that the vehicle hesitated to respond and was jerking upon depressing the accelerator pedal. The contact who is an independent mechanic had replaced the transmission speed sensor, the transmission shift position sensor, the vehicle speed sensor, the shift solenoid block, the transmission fluid, the transmission clutch solenoid, and the wheel speed sensor; however, the failure persisted. The contact used an OBD scanner and retrieved DTC codes indicating that the ABS wiring was overheating. The contact later became aware that the VIN was included in NHTSA Campaign Number: 12V016000 (Service Brakes, Hydraulic). The vehicle was taken to the dealer for the recall repair; however, the dealer bypassed the ABS module. The contact stated that while driving 40 MPH to the residence after the repair, the failure recurred. The contact stated that the recall repair did not involve bypassing the ABS module. The dealer was contacted, but no further assistance was provided. The vehicle was not repaired. The manufacturer was notified of the failure, and several cases were opened; however, no assistance was provided. The failure mileage was approximately 162,000.

My car has had a abs engine code for a year that I have spent a lot of money trying to get it off because, I can’t renew my tag because it failed emissions vehicle safety test . So I was notified by my insurance company that my vehicle was under recall. I read it and called Mazda and it was confirmed and I went to the shop and I waited 6 hours for the installation of a new abs module and wire harness. Hennesy Mazda of morrow Georgia bypassed the abs system but replaced my voltage regulator with out my consent. The recall recommended repair is to replace the abs module and harness. The dealership refused to comply and neither offered a tow back to Newnan Georgia where I live. So they placed me and others at risk by failing to comply. I have been ignored even after speaking with 3 customer service representatives and I was given a call [XXX] 10/11/23. I was told that I had to get it to Marietta Jim Ellis Mazda and that they would contact me but know one has called. I need your help to resolve this serious violation of the recall and the altering of my vehicles abs by bypassing it 😳🙄. I have lost a total of $2,367 in parts lost wages and anguish due to their lack of compliance of the recall of my 2002 Mazda tribute es abs module and harness. The abs module and wiring to ECM gets the voltage regulator hot and causes abs engine light to illuminate and malfunction. This my work vehicle I need it to make a living. The abs module and harness wasn’t changed but was bypassed 😳. The recall clearly states the issue and recommended repairs by vehicle manufacturer or authorized dealer. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

My car has had a abs engine code for a year that I have spent a lot of money trying to get it off because, I can’t renew my tag because it failed emissions vehicle safety test . So I was notified by my insurance company that my vehicle was under recall. I read it and called Mazda and it was confirmed and I went to the shop and I waited 6 hours for the installation of a new abs module and wire harness. Hennesy Mazda of morrow Georgia bypassed the abs system but replaced my voltage regulator with out my consent. The recall recommended repair is to replace the abs module and harness. The dealership refused to comply and neither offered a tow back to Newnan Georgia where I live. So they placed me and others at risk by failing to comply. I have been ignored even after speaking with 3 customer service representatives and I was given a call [XXX] 10/11/23. I was told that I had to get it to Marietta Jim Ellis Mazda and that they would contact me but know one has called. I need your help to resolve this serious violation of the recall and the altering of my vehicles abs by bypassing it 😳🙄. I have lost a total of $2,367 in parts lost wages and anguish due to their lack of compliance of the recall of my 2002 Mazda tribute es abs module and harness. The abs module and wiring to ECM gets the voltage regulator hot and causes abs engine light to illuminate and malfunction. This my work vehicle I need it to make a living. The abs module and harness wasn’t changed but was bypassed 😳. The recall clearly states the issue and recommended repairs by vehicle manufacturer or authorized dealer. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)