2015 HARLEY-DAVIDSON XG750 — Problems, Recalls & Safety Data

My Street 750 has 11,800 miles. While riding at 65 mph, sudden loss of drive. Pulled over to notice the motorcycle's belt missing and debris on the belt guide and the back wheel. The bolt holding the front sprocket was out of place and made a hole in the cover. The front sprocket was out of place. I was able to walk back my path and found the belt shredded.

I RECENTLY BOUGHT A 2015 HARLEY DAVIDSON XG750 FROM A DEALERSHIP. I'VE RIDDEN THE BIKE FOR ABOUT 6 MONTHS AND THE REAR BRAKES WENT OUT. THE MAINTENANCE WAS CURRENT THROUGH THE HARLEY DAVIDSON DEALERSHIP, BUT AFTER A 30 MIN RIDE, THE REAR BRAKES WENT FROM SOGGY TO NIL.

I COMPLAINED ABOUT THE PERFORMANCE OF THE BIKE AND THE DEALER TOLD ME THAT I HAD TO JUST BREAK IT IN. I HAD OTHER PERSONS RIDE IT AND TOLD ME THAT PERHAPS IT WAS THE THROTTLE AND OR FUEL INJECTOR. I CALLED AND COMPLAINED AGAIN AND THEY SAID THAT I NEEDED TO JUST RIDE IT MORE AND GET USE TO IT. I SAID IT WAS LOSING POWER AND MAYBE THE INJECTOR WAS CLOGGED. I TOOK IT TO A LOCAL MECHANIC WHO THEN SAID THAT BECAUSE IT'S UNDER A WARRANTY AND THE FUEL INJECTOR IS COMPUTERIZED THAT THE BIKE SHOULD BE LOOKED AT BY THE DEALER. I CALLED THE DEALER AGAIN AND EXPLAINED TO THE TECH WHAT I WAS TOLD. HE SAID WE WILL MAKE SOME ADJUSTMENTS AND SEE WHAT HAPPENS. HE SAID I CAN HAVE A TRAILER PICK IT UP AT MY COST OF $50 OR SO EACH WAY. UNFORTUNATELY, WORK GOT IN THE WAY AND COULD NOT TAKE IT. THE NEXT SEASON IN 2017 I HAD THE SAME ISSUE EXPECT THIS TIME IT CAUSED MY ACCIDENT. THIS PROPELLING OF FUEL ALL AT ONCE TO MY BIKE ALMOST KILLED ME AND INJURED ME SEVERELY. THE FUEL GAUGE WENT ON AS I WAS ROLLING TO A STOP AND CONTINUED THROUGH IN FIRST OR SECOND GEAR AND THEN SUDDENLY THE BIKE BOGGED DOWN AND ACCELERATED ALMOST ON IT'S WITH SUCH INTENSITY I LOST CONTROL. HIT FRONT AND BACK BREAK BUT BACK FAILED TO ENGAGE ENOUGH TO KEEP ME STRAIGHT ENDED UP LIFTING BACK TIRE AND FLYING OVER HANDLE BARS.

I COMPLAINED ABOUT THE PERFORMANCE OF THE BIKE AND THE DEALER TOLD ME THAT I HAD TO JUST BREAK IT IN. I HAD OTHER PERSONS RIDE IT AND TOLD ME THAT PERHAPS IT WAS THE THROTTLE AND OR FUEL INJECTOR. I CALLED AND COMPLAINED AGAIN AND THEY SAID THAT I NEEDED TO JUST RIDE IT MORE AND GET USE TO IT. I SAID IT WAS LOSING POWER AND MAYBE THE INJECTOR WAS CLOGGED. I TOOK IT TO A LOCAL MECHANIC WHO THEN SAID THAT BECAUSE IT'S UNDER A WARRANTY AND THE FUEL INJECTOR IS COMPUTERIZED THAT THE BIKE SHOULD BE LOOKED AT BY THE DEALER. I CALLED THE DEALER AGAIN AND EXPLAINED TO THE TECH WHAT I WAS TOLD. HE SAID WE WILL MAKE SOME ADJUSTMENTS AND SEE WHAT HAPPENS. HE SAID I CAN HAVE A TRAILER PICK IT UP AT MY COST OF $50 OR SO EACH WAY. UNFORTUNATELY, WORK GOT IN THE WAY AND COULD NOT TAKE IT. THE NEXT SEASON IN 2017 I HAD THE SAME ISSUE EXPECT THIS TIME IT CAUSED MY ACCIDENT. THIS PROPELLING OF FUEL ALL AT ONCE TO MY BIKE ALMOST KILLED ME AND INJURED ME SEVERELY. THE FUEL GAUGE WENT ON AS I WAS ROLLING TO A STOP AND CONTINUED THROUGH IN FIRST OR SECOND GEAR AND THEN SUDDENLY THE BIKE BOGGED DOWN AND ACCELERATED ALMOST ON IT'S WITH SUCH INTENSITY I LOST CONTROL. HIT FRONT AND BACK BREAK BUT BACK FAILED TO ENGAGE ENOUGH TO KEEP ME STRAIGHT ENDED UP LIFTING BACK TIRE AND FLYING OVER HANDLE BARS.

WHILE AT HIGHWAY SPEED, 65MPH, FRONT BELT PULLEY BOLT BROKE CAUSING PULLEY TO DISLODGE. CAUSES BELT TO WRAP AROUND SHAFT AND JAM LOCKING REAR WHEEL. LUCKILY THE PULLEY DID NOT FALL OFF BELT GUARD AND HIT MYSELF OR ANY OTHER VEHICLES. THIS HAS NOT BEEN ADJUSTED DUE TO NOT NEEDING NEW BELT, AND WAS AT SAME SPECS FROM FACTORY. UPON RESEARCH, FOUND MULTIPLE OWNERS SAME YEAR HAVING SAME FAILURES. SO FAR NO ONE HAS WRECKED OR CAUSED INJURY, HOWEVER HAD I BEEN INEXPERIENCED I LIKELY WOULD HAVE. UPON CONTACTING MY LOCAL DEALER WHERE PURCHASED I WAS TOLD THAT HUMIDITY COULD WEAKEN THE BOLT AND CAUSE FAILURE. THIS WAS FEB 27 @ 1330. WAS TOLD I WOULD HAVE TO PAY FOR DIAGNOSTICS AND REPAIR. I'M SURPRISED THAT HUMIDITY COULD BE BLAMED FOR FAILURE, AND THEN HAVE TO PAY FOR REPAIR. I OPTED TO REMOVE BROKEN BOLT ON OWN WITH BASIC TOOLS PREVIOUSLY . DID NOT WANT TO ASSIST IN WORKING WITH MAIN MANUFACTURER OR INVESTIGATE THE MULTIPLE FAILURES.