1999 DODGE RAM 2500 Engine And Engine Coolingenginediesel Problems

I HAVE A 1999 CUMMINS WITH THE #53 BLOCK. THE BLOCK IS CRACKED AND ACCORDING TO THIS MY RESEARCH, THIS IS A COMMON PROBLEM. I HAVE ALWAYS OWNED DODGE VEHICLES BUT WITH ALL THE HASSLE AND MONEY I HAVE GONE THROUGH TRYING TO FIX THIS, IT IS REALLY MAKING ME RECONSIDER BUYING A DODGE PRODUCT EVER AGAIN. THIS IS NOT A WEAR AND TEAR ISSUE THIS IS A DEFECT AND CUMMINS NEEDS TO ADDRESS IT PROPERLY. BUYER BEWARE! *TR

CRACK IN BLOCK LEAKING COOLANT YR. 1999 DODGE RAM 2500 DIESEL. *NM

MY 1999 DODGE RAM 2500 SLT TURBO CUMMINS DIESEL. OVER $11,000.00 IN MAINTENANCE IN 5 YEARS @ 122,000 MILES. MOST RECENTLY FUEL PUMP, TURBO INJECTED OVER A $3,000.00 BILL. 30 DAYS AGO IT WAS $3,000.00 AND SEVERAL OTHER ISSUES. *NM

THE ENGINE SURGES PERIODICALLY, SOMETIMES WHEN GOING DOWN THE ROAD. I BELIEVE IF THE THROTTLE JAMS WIDE OPEN INJURY COULD OCCUR AND VEHICLE WOULD BE UNCONTROLLABLE. DIAGNOSED AS A FAULTY THROTTLE POSITION SENSOR. CONTACTED THE DEALER, NOT UNDER WARRANTY, COST TO REPLACE, $550.00. CONTACTED CHRYSLER, NOTHING CAN BE DONE, EXCEPT MY PAYING FOR REPLACEMENT. *NM

COOLANT LOSS, SMALL AMOUNT AT FIRST. INSPECTED HOSES, THERMOSTAT, CORE PLUGS AND RADIATOR FOR COOLANT SEEPAGE POSSIBILITIES, LABORED TO NO AVAIL . OVER A PERIOD OF TIME, IT WAS BROUGHT TO MY ATTENTION A SMALL CRACK IN THE BLOCK AND THROUGH RESEARCHING I HAVE THIS INFORMATION. MY BLOCK IS CAST IN BRAZIL BY A COMPANY NAMED "TUBY" AND IS IDENTIFIED BY A #53 NUMBERED ON THE BLOCK. IT HAS BECOME APPARENT TO ME THAT THESE ARE DEFECTIVE DUE TO WEAK CASTING THAT RESULTED IN THINNER WATER JACKET WALLS THAN OTHER BLOCKS SO WITH COOLANT CAVITATION, CORROSION, COOLANT PRESSURE IN THE BLOCK, AND TORQUE THEY ARE MORE PRONE TO CRACK. CHRYSLER WILL NOT HONOR MY WARRANTY, IT HAS BEEN MORE THAN 5 YEARS BUT THE MILEAGE WAS AT 94,891. CUMMINS POWERMASTER ADVISED ME TO TAKE IT TO A LOCAL DEALER IN TAMPA AND I DID. THEY DID A COOLANT PRESSURE CHECK...

I HAVE A 1999 DODGE 2500 WITH A 24 VALVE CUMMINS MOTOR. I STARTED TO NOTICE COOLANT LOSS AND FOUND A CRACK ON THE PASSENGER SIDE OF THE BLOCK BEHIND THE HEAT EXCHANGER. I HAVE SINCE FOUND THIS TO BE A VERY COMMON PROBLEM WITH 99 - 01 WITH A 53 CASTING . I WENT TO DEALER, ONLY TO FIND I WAS JUST OUT OF WARRANTY. I WROTE TO DAIMLER/CHRYSLER AND TO QUOTE "WE ARE STARTING TO SEE SEVERAL OF THESE APPEAR AND HAVE APPROACHED CUMMINS ABOUT THIS PROBLEM, BUT AT THIS POINT THEY ARE DRAGGING THEIR FEET ON RESTITUTION OR RESOLUTION." I TALKED TO CUMMINS AND THEY SAID PER THEIR ORIGINAL CONTRACT THEY SOLD ENGINES WITH NO IMPLIED WARRANTY TO DODGE, AS THEY SAID THEY WANTED TO HANDLE ALL WARRANTY ISSUES. THEY BOTH AGREE THAT THEIR WAS A DEFECT WITH THAT CASTING AND HAVE CORRECTED IT ON OTHER YEARS....

I HAVE A CUMMINS DIESEL. IT HAS A 53 BLOCK. THERE WAS BEEN ALOT OF REPORTS OF THESE BLOCKS CRACKING. I PAID OVER $5000 FOR THIS OPTION. IT COSTS OVER $7000 TO GET IT FIXED. I DON'T HAVE A PROBLEM YET. JUST FEEL LIKE I'M DRIVING A TIME BOMB. CHRSYLER REFUSES TO HELP ANY OF THE POOR GUYS WITH THIS CRACKED BLOCK. THIS IS A SERIOUS ISSSUE OF A DEFECTIVE BLOCK. PLEASE HELP ALL OF US WITH THE 53 BLOCK.*AK

I AND MANY OTHER OWNERS OF 1998 THRU 2001 DODGE CUMMINS DIESEL VEHICLES HAVE OR WILL EXPERIENCE A KNOWN DEFECT OF THE DESIGNATED 53 BLOCK IN THESE VEHICLES. THE 53 BLOCK CAN DEVELOP A CRACK BEHIND THE HEAT EXCHANGER ON THE PASSENGER SIDE WHICH RESULTS IN COOLANT LOSS AND A REPLACEMENT BLOCK. MINE CRACKED AT 5 YEARS 2 MONTHS AND 53K MILES. STANDARD WARRANTY FOR THESE ENGINES IS 5 YEARS 100K. I LIKE MANY OWNERS HAVE HAD TO PAY ANYWHERE FROM $2000.00 AND UP TO HAVE A KNOWN DEFECT REPAIRED AS CHRYSLER WILL NOT COVER THE KNOWN PROBLEM IF OVER THE 5YEAR 100K LIMIT. THERE ARE MANY UNSUSPECTING PEOPLE OUT THERE THAT MAY NOT KNOW OF THIS DEFECT AND MANY USED VEHICLES ON USED VEHICLE LOTS THAT MAY BE SOLD TO PEOPLE THAT ARE UNAWARE OF THIS PROBLEM. CUMMINS HAS GIVEN SOME ASSISTANCE, CHRYSLER HAS GIVEN NONE. EITHER WAY THE...

(1)DEALER OIL CHANGE, SUBSEQUENT LEAK.(2)INFORMED OIL PLUG WAS 'CRACKED' AND OIL PAN WAS 'CONCAVE' AND REQUIRED RELACEMENT@$800+. INFORMED THIS WAS NOT UNCOMMON.OLD PLUG NOT RETURNED. (3) $20@KRAGEN GOT ME GASKET MATERIAL AND PTEX#2, LEAK FIXED.*AK