2000 DAEWOO LEGANZA Engine And Engine Cooling Problems

DEALERSHIP WAS UNABLE TO PERFORM CAM SHAFT POSITION SENSOR RECALL 04V357000 REPAIRS BECAUSE THE PARTS WERE NOT AVAILABLE.*AK

CONSUMER RECEIVED, NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE IN THE RADIUS OF 100 MILES.*AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER RECEIVED THIS RECALL NOTICE AND WAS UNABLE TO LOCATE AN AUTHORIZED SERVICE CENTER IN THEIR AREAS.*AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER UNABLE TO GET THE DEALER TO HONOR THIS RECALL. DEALER INFORMED THE CONSUMER THAT THE SENSOR DID NOT FALL WITHIN THE PERIMETER OF THE SENSOR LOT NUMBERS. NOTHING ON THE RECALL NOTICE REFLECTED THIS INFORMATION.*AK RECALL CAMPAIGN; THE CONSUMER STATED THAT THE CHECK ENGINE LIGHT CAME ON AND STAYED ON. *TC

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER WAS UNABLE TO FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO SERVICE CENTER. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. NO PARTS WERE AVAILABLE. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. NO PARTS WERE AVAILABLE. *AK

THE CONSUMER RECEIVED, NHTSA RECALL CAMPAIGN LETTER #04V357000 REGARDING THE CAMSHAFT POSITION SENSOR. NO DEALERSHIP AVAILABLE. PLEASE PROVIDE FURTHER INFORMATION. *JB

THE CONSUMER RECEIVED, NHTSA RECALL CAMPAIGN LETTER #04V357000 REGARDING THE CAMSHAFT POSITION SENSOR. NO DEALERSHIP AVAILABLE IN THE AREA OF NEBRASKA. *JB

THE CONSUMER WAS UNABLE TO FIND A DEALERSHIP OR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. RECALL#04V357000 CAMSHAFT POSITION SENSOR. PLEASE PROVIDE MORE INFORMATION. *JB

CONSUMER RECEIVED NHTSA RECALL 04V357000 FOR THE CAMSHAFT POSITION SENSOR. THE CONSUMER CONTACTED THE DEALER AND THE DEALER DID NOT HAVE THE PARTS AVAILABLE. *JB

04V357000/CAMSHAFT POSITION SENSOR. THE OWNER RECEIVED A RECALL NOTICE FROM THE MANUFACTURER AND TOOK THE VEHICLE TO AN AVAILABLE DAEWOO DEALERSHIP WHO DENIED THE CONSUMER BECAUSE THE VEHICLE WAS NOT PURCHASED FROM THAT DEALERSHIP. PROVIDE FURTHER DETAILS. *JB

THE VEHICLE'S ENGINE LIGHT CAME ON AND WAS TAKEN IN FOR REPAIR. THE CAMSHAFT SENOR WAS REPLACED. THE CONSUMER INCURRED EXPENSES FOR REPLACEMENT OF COMPONENT PRIOR TO RECEIVING NOTIFICATION OF DAEWOO'S SAFETY RECALL (NHTSA CAMPAIGN NO. 04V-357). THE CONSUMER MAILED THE APPROPRIATE DOCUMENTATION TO THE MANUFACTURER FOR REIMBURSEMENT AND SCHEDULED AN APPOINTMENT WITH AN AUTHORIZED DEALER TO HAVE CORRECTIVE ACTION FOR RECALL PERFORMED. CAMSHAFT 04V357000. *JB *SC

CONSUMER RECEIVED A RECALL NOTICE(04V357000) FOR THE CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *JB

CONSUMER RECEIVED A RECALL NOTICE(04V357000) FOR THE CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *JB

CONSUMER RECEIVED A RECALL(04V357000) FOR THE CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *JB

CONSUMER RECEIVED A RECALL NOTICE(04V35700) FOR THE CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *JB

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING THE CRANK SHAFT POSITION SENSOR. DEALERSHIP INDICATED TO THE CONSUMER THERE WAS NO PART AVAILABLE TO PERFORM RECALL REPAIRS. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER COULD NOT FIND A DEALERSHIP NOR CONTACT THE NUMBER FOR DAEWOO CONSUMER SERVICE CENTER PROVIDED ON THE RECALL LETTER. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CAMSHAFT POSITION SENSOR. CONSUMER WAS TOLD BY THE DEALER THAT THEY WERE UNABLE TO GET PARTS TO SERVICE THE VEHICLE. THEY HAVE TRIED TO CONTACT THE MANUFACTURER, HOWEVER, NO ONE WAS ANSWERING THE PHONES, ANDTHERE WAS NO PROJECTED DATE AS TO WHEN THEY MAY BE AVAILABLE. *AK *TT

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER REFUSED TO HONOR RECALL BECAUSE THE SENSOR DID NOT FALL WITHIN THE PERIMETER OF THE SENSOR LOT NUMBERS.*AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING THE CRANK SHAFT POSITION SENSOR. DEALERSHIP INDICATED TO THE CONSUMER THEY DIDN'T HAVE THE PARTS AVAILABLE TO PERFORM THE RECALL REPAIRS. *AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER REFUSED TO HONOR RECALL BECAUSE THE SENSOR NUMBER DID NOT FALL WITHIN THE PERIMETER OF THE SENSOR'S LOT NUMBERS. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED, NHTSA RECALL 04V357000 REGARDING THE CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE. THE PHONE PROVIDED IN THE LETTER ALWAYS WAS BUSY.*AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CAN NOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER TO DAEWOO CUSTOMER SERVICE TO DO RECALL REPAIRS. *AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR CONSUMER RECEIVED THIS RECALL NOTICE AND WAS UNABLE TO LOCATE AN AUTHORIZED SERVICE CENTER IN ATLANTA, GEORGIA.*AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT SENSOR. DEALER WAS NOT IN OPERATION.*AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER COULD NOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER TO DAEWOO CUSTOMER SERVICE TO DO RECALL REPAIRS. *AK BRAKES SQUEELING ON VEHICLE. RECALL DONE ON 09/27/2004 AS WELL AS THE AIR BAG RECALL. *TC

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER COULD NOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER TO DAEWOO CUSTOMER SERVICE TO DO RECALL REPAIRS. *AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER COULD NOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER TO DAEWOO CUSTOMER SERVICE TO DO RECALL REPAIRS. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR . DEALER WAS NOT IN OPERATION.*AK

RECALL 04V357000 CONCERNING CAM SHAFT. CONSUMER RECEIVED THIS RECALL NOTICE, AND CHECK ENGINE LIGHT ILLUMINATED WHILE DRIVING. BUT DEALER STATED THAT CONSUMER'S VEHICLE WAS NOT COVERED UNDER RECALL DUE TO VIN. *AK

ENGINE WAS REPLACED. THE CHECK ENGINE LIGHT WAS ON. THERE WERE NO DEALERS IN THE AREA TO REPAIR THE CAMSHAFT SENSOR RECALL 04V357000. *AK *TC

CONSUMER RECEIVED RECALL (04V357000 CONCERNING CAM SHAFT POSITION SENSOR. NO PARTS WERE AVAILABLE. SERVICE MANAGER MIKE.*AK

WHILE DRIVING VEHICLE STALLED. THE CHECK ENGINE LIGHT APPEARED ON AND REMAINED ON. CONSUMER WAS ABLE TO DRIVE VEHICLE TO THE DEALER FOR INSPECTION, AND MECHANIC CLAIMED THAT THIS VEHICLE V WAS NOT INCLUDED IN THE RECALL DUE TO VIN. *AK

CONSUMER RECEIVED ARECALL NOTICE04V357000 CONCERNING CAM SHIFT POSITION SENOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL NOTICE 04V357000 CONCERNIN CAM SHIFT POSITION SENOR. DEALER WAS NOT IN OPERATION.*AK

DEALERSHIP REFUSED TO HONOR CAM SHAFT POSITION SENSOR RECALL 04V35700. THEY INDICATED THAT THEY DIDN' WORK ON THIS MAKE VEHICLES ANYMORE.*AK

CONSUMER RECEIVED, NHTSA RECALL 04V357000 REGARDING THE CRANK SHAFT POSITION SENSOR. COMPANY WAS OUT BUSINESS. NO DEALERSHIP WAS AVAILABLE IN CONNECTICUT. *AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. THE CONSUMER MADE AN APPOINTMENT OVER THE PHONE TO HAVE THE VEHICLE SERVICED. UPON ARRIVAL, THE CONSUMER WAS TOLD THAT THE VIN OF THE VEHICLE DID NOT FALL WITHIN THOSE SELECTED AND WAS REFUSED SERVICE. *AK *SC

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING THE CRANK SHAFT POSITION SENSOR. CONSUMER CALLED THE DEALERSHIP WHERE SHE BOUGHT THE VEHICLE, AND THE ANSWER WAS SORRY WITH DO NOT DEAL ANY MORE WITH DAEWOO.*AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER CHARGED CONSUMER FOR THE REPAIRS. *AK THE CHECK ENGINE LIGHT HAD COME ON AND REMAINED ON EVEN AFTER THE SWITCH WAS RESET. *SC

CONSUMER RECEIVED RECALL NOTICE 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

ON SEPTEMBER 15, THE CONSUMER WAS AVAILABLE TO GET IN CONTACT WITH DAEWOO PHONE NUMBER DESCRIBED ON THE NHTSA RECALL# 04V357000. 877-362-1234. THE CONSUMER LEFT A VOICE MAIL AND WAS ANSWER BY DAEWOOD EMPLOYEES SEVERAL HOURS LATER, INDICATING TO HER WHERE TO TAKE THE LEGANZA VEHICLE. THE TWO NEAREST DEALERSHIPS CLOSE TO HER ADDRESS ARE BETWEEN 140 TO 175 MILES FROM HOME. PLEASE PROVIDE FURTHER INFORMATION. *JB CONSUMER WAS TOLD THE CAM SHAFT SENSOR HAD TO BE REPLACED. SHE ALSO COMPLAINED THAT THE SAFETY SWITCH UNDER THE BRAKE PEDAL WAS OUT AND THERE WAS AN OIL LEAK IN FRONT OF THE MOTOR ON THE PASSENGER SIDE. LAST BUT NOT LEAST, IN ORDER TO START THE VEHICLE, THE CONSUMER HAD TO PUT THE IGNITION KEY IN THE SHIFT LOCK SLOT. PUT THE VEHICLE IN NEUTRAL, THEN INSERT THE KEY IN THE IGNITION AND CHANGE THE GEAR. *PH

WHEN THE DEALERSHIP WAS CONTACTED TO MAKE AN APPOINTMENT TO HAVE THE CAM SHAFT POSITION (CMP) SENSOR RECALL 04V357000 PERFORMED, THEY INDICATED THAT DIDN'T KNOW ANYTHING ABOUT THE RECALL AND REFUSED TO DO IT. *JB