2000 DAEWOO LEGANZA Engine And Engine Cooling Problems

THE CAM SHAFT POSITION SENSOR MALFUNCTION IN MY 2000 DAEWOO LEGANZA. MY CAR IS PART OF THE RECALL (I CHECKED VIN ON DAEWOO WEBSITE) BUT I DID NOT RECEIVE A RECALL NOTIFICATION LETTER. I DO NOT KNOW WHERE TO GO TO FOR PARTS AND REPAIRS. ALL ATTEMPTS AT MAKING CONTACT WITH DAEWOO HAVE GONE UNANSWERED. I NEED HELP LOCATING A REPAIR SHOP TO MAKE NECESSARY CORRECTIONS TO MY VEHICLE. *TR

TL*- THE CONTACT TOOK THE 2000 DAEWOO LEGANZA TO THE DEALERSHIP TO HAVE NHTSA RECALL 04V35700 CAMPAIGN ID NUMBER: 04V357000 REPAIRS ON ENGINE AND ENGINE COOLING:CAM SHAFT POSITION SENSOR DONE. THE DEALER STATED THAT THEY WOULD CHARGE HIM $135 FOR INSPECTING THE VEHICLE IF THE VEHICLE DID NOT FALL WITHIN THE SET OF LOT NUMBERS, BETWEEN 1000 LOT NUMBER OR 2321 LOT NUMBER, WHICH WOULD COVER THE TOTAL COST OF THE REPAIR. THE CONTACT WAS CONCERNED BECAUSE HE THOUGHT THAT UNDER THE RECALL THEY WERE OBLIGATED TO INSPECT THE VEHICLE FOR FREE. THE CURRENT MILEAGE WAS 50000. THERE HAS BEEN NO FAILURE TO DATE.*AK

THE RECALL REPAIRS FAILED TO RESOLVE THE PROBLEMS WITH THE CONSUMER'S 2000 DAEWOO LEGANZA. *KB AFTER THE RECALL REPAIRS WERE DONE THE CHECK ENGINE LIGHT CONTINUED TO ILLUMINATE. *NM

AFTER REPLACING CAMSHAFT SENSOR, I KEEP RECEIVING ENGINE SIGN WITH ERROR CODE: FUEL INJECTOR FIRED WRONG OR SOMETHING. I TOOK MY CAR IN SERVICE IN END OF 2003 THEY REPLACED A FUEL INJECTOR THAT WAS GIVING ERROR BY PURCHASING FROM GM. THEN AGAIN IN MID 2004, THEY REPLACED TWO FUEL INJECTORS. AFTER 6 MONTHS GOT SAME ERROR AND SERVICE REPLACED ALL 4 FUEL INJECTORS IN MID 2005. ENGINE SIGN WENT AWAY FOR 3-4 MONTHS AND STARTED COMING BACK WHOLE CAR SHAKES, I CAN'T ACCELERATE PROPERLY. NOW, I AGAIN TOOK TO MECHANIC AND THEY REPLACED IGNITION WIRE AND FUEL INJECTORS AGAIN. I HAVE PAID ALMOST $3000.00 FOR SAME PROBLEM. IT KEEPS HAPPENING, I KEEP GETTING ENGINE SIGN AND CAR SHAKES. CAN YOU PLEASE INVESTIGATE IN THIS ISSUE. I HAVE DAEWOO, LEGANZA WITH 76,000 MILES, YEAR: 2000. *JB *AK

2000 DAEWOO LEGANZA CHECK ENGINE LIGHT ILLUMINATED. ENGINE MADE NOISE AND DIED. *KB WHEN THE CHECK ENGINE LIGHT ILLUMINATED THE CONSUMER TOOK THE VEHICLE TO THE DEALER. EACH TIME THE VEHICLE WAS TAKEN TO THE DEALER DIFFERENT PARTS WERE REPLACED BUT THE LIGHT WOULD RETURN. THE VEHICLE WAS RETURNED TO THE DEALER SEVERAL TIME FOR ABOUT A YEAR AND A HALF BUT THE PROBLEM ALWAYS RETURNED. THE CONSUMER HAS HAD A DIFFICULT TIME GETTING THE RECALLED CAMSHAFT POSITION SENSOR REPLACED. THE DEALER HAD NO PARTS AVAILABLE TO REPLACE THE PART. THE GEAR SHIFTER BECAME STUCK IN PARK. THE DEALER REPLACED THE BRAKE SWITCH. THE VEHICLE CAUGHT ON FIRE UNDER THE MANIFOLD. *NM

CONSUMER COMPLAINT CONCERNING REIMBURSEMENT FOR PARTS. *TS THE CONSUMER HAD THE CAMSHAFT REPAIRS MADE PRIOR TO RECEIVING THE RECALL NOTICE. THE CONSUMER CONTACTED DAEWOO AND LEFT SEVERAL MESSAGES BUT NO ONE HAS RETURNED HIS CALL. THE CONSUMER IS REQUESTING REIMBURSEMENT FOR REPAIRS MADE PRIOR TO RECALL NOTIFICATION. *NM

I RECEIVED A LETTER FROM DAEWOO MOTOR AMERICA DETAILING CORRECTIVE ACTION ON THE CAM SHAFT POSITION SENSOR IN MY LEGANZA. I PROVIDED THEM WITH THE REQUIRED LETTER AFFIRMING THAT I AM THE OWNER OF THE VEHICLE, A COPY OF THE RECEIPT SHOWING THAT THE REPLACEMENT HAD ALREADY BEEN DONE PRIOR TO THE LETTER , AND THE ADDRESS TO WHICH MY REFUND SHOULD BE SENT. THAT WAS LAST NOVEMBER 2004. I HAVE YET TO SEE MY REFUND, AND IT IS MARCH 23.2005. WHO DO I CONTACT TO FOLLOW THIS THROUGH? THERE IS NO NUMBER IN THE LETTER FOR FOLLOW-UP PROCEDURES. I BELIEVE THEY'VE HAD PLENTY OF TIME TO RESPOND.*AK

NHTSA RECALL CAMPAIGN 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER REFUSED TO HONOR THE RECALL BECAUSE THE SENSORS LOT NUMBER WAS NOT PART OF THE RECALL. HOWEVER, THE VIN NUMBER WAS PART OF THE RECALL. *AK *SC *JB

RECALL CAMPAIGN 04V357000 CONCERNING CAMSHAFT POSITION SENSOR. CONSUMER STATES DEALER CHARGED FOR RECALL REPAIRS. *AK THE CONSUMER REQUESTED REIMBURSEMENT. *SC *JB

THE CHECK ENGINE LIGHT CAME ON. THE DRIVER'S SIDE MIRROR DOES NOT WORK, AND THE WINDOW IS BROKEN. ALSO, THE CAM SHAFT SENSOR NHTSA RECALL 04V357000. *AK *SC THE CONSUMER NO LONGER OWNS THE VEHICLE. *JB

THE CONSUMER RECEIVED NHTSA'S RECALL # 04V357000. THE CONSUMER THEN CALLED THE MANUFACTURER AND WAS TOLD THAT THE VEHICLE IDENTIFICATION NUMBER DID NOT FALL INTO THIS RECALL. SHE REQUESTED THE PART AND INSISTED THAT SHE WOULD PAY TO HAVE IT INSTALLED BUT DAEWOO WOULD NOT COMPLY. *JB RECALL CAMPAIGN; THE ENGINE LIGHT CAME ON IN THE VEHICLE. THE CONSUMER WAS TOLD THAT THE CAM SENSOR WAS DEFECTIVE. THE CONSUMER RECEIVED THE RECALL DAYS LATER. THE CONSUMER WAS TOLD TO PAY FOR THE PART . *TC

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT SENSOR. CONSUMER HAD TO HAVE THE ENGINE REPLACED, AND HAD BEEN UNABLE TO MAKE CONTACT WITH THE MANUFACTURER.*AK *TC

WHILE DRIVING 55 MPH ENGINE LIGHT ILLUMINATED. THEN VEHICLE STALLED. CONSUMER PULLED OVER, AND HAD THE VEHICLE TOWED. DEALERSHIP WAS NOTIFIED, BUT DID NOT RESOLVE THE PROBLEM. *AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER WAS UNABLE TO GET THIS RECALL HONORED BECAUSE THE SENSOR LOT NUMBER DID NOT MATCH. *AK

CONSUMER HAD TO PAY OUT OF POCKET EXPENSES FOR CAM SHAFT SENSOR. NHTSA RECALL 04V357000. *AK

WHILE DRIVING, THE ENGINE CAUGHT ON FIRE. THERE WERE NO DEALERS IN THE AREA TO MAKE THE REPAIR. NHTSA RECALL 04V3570000. *JB

THE CONSUMER RECEIVED NHTSA RECALL 04V357000 ON THE CAMSHAFT POSITION SENSOR. HOWEVER, THE CONSUMER WAS UNABLE TO LOCATE A DEALER TO HONOR THE RECALL. *JB

AFTER MAILING THE RECEIPTS TO THE MANUFACTURER SOME SIX WEEKS AGO CONSUMER HAD NOT BEEN REIMBURSED FOR THE CAM SHAFT SENSOR. NHTSA RECALL 04V357000. *AK *TC

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR, INSPECTION ONLY, COULD NOT DUPLICATE AT THIS TIME. *BF THE CHECK ENGINE LIGHT WAS ON FOR A LONG TIME. THE VEHICLE STALLED ON THE HIGHWAY. THE FUEL PUMP WAS REPLACED. THE SPEEDOMETER HAD DROPPED DOWN TO 0 THEN CORRECTED ITSELF. THERE WAS A SLIGHT SMELL OF BURNING, THE TEMPERATURE GAUGE WAS TOWARD THE HOT INDICATOR. THE PROBLEM WAS UNABLE TO BE DUPLICATED. *SC *JB

THE CONSUMER RECEIVED A RECALL NOTICE(0V4357000) REGARDING THE CAMSHAFT POSITION SENSOR. THERE WAS DEALER AVAILABLE TO PERFORM THE RECALL. *JB

NHTSA RECALL 04V357000 SUBJECT: CAMSHAFT POSITION SENSOR. THE CONSUMER WAS UNABLE TO LOCATE A DEALER TO HONOR THE RECALL. *JB

CONSUMER HAD TO PAY OUT OF POCKET FOR CAM SHAFT SENSOR RECALL 04V357000.*AK

DEALERSHIP CHARGED THE CONSUMER TO PERFROM THE CAMSHAFT POSITION SENSOR RECALL 04V357000.*AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECA 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 04V357000 FOR CAM SHAFT POSITION SENSOR. NO CONTACT COULD BE MADE WITH A DEALER. PAYMENT HAD TO BE MADE BY THE CONSUMER TO AN INDEPENDENT MECHANIC. *AK

CONSUMER STATED DEALER WAS WAITING FOR PARTS FOR RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. *AK

RECALL 04V357000 FOR THE CAM SHAFT POSITION SENSOR, REPAIRS TO BE MADE BY THE CONSUMER. *AK *TC

CONSUMER RECEIVED RECALL 04V357000 FOR THE CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

DEALER HAS NO PARTS TO REPAIR CAM SHAFT POSITION SENSOR RECALL 04V357000. *AK THE SALES DEALER IN FLORIDA TENTATIVELY AGREED TO HONOR THE RECALL IN THE NEAR FUTURE. THE CONSUMER HAS TRIED TO HAVE THE RECALL IN NORTH CAROLINA BUT NONE OF THE DEALER'S HAVE THE PART NEEDED. *NM

THE CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. OUT OF POCKET EXPENSE FOR CONSUMER. *AK *SC

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CANNOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CANNOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CANNOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

WHILE DRIVING EHICLE STALLED. CONSUMER WAS UNABLE TO RESTART VEHICLE, AND HAD IT TOWED TO THE DEALER FOR INSPECTION. MECHANIC CLAIMED THAT THE PROBLEM CAULD NOT BE DUPLICATED. *AK

CONSUMER RECEIVED RECALL 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER HAS TO PAY OUT OF POCKET EXPENSES FOR CAM SHAFT SENSOR RECALL 04V357000.*AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER TOOK THE VEHICLE TO A DAEWOO DEALERSHIP. CONSUMER WAS TOLD THAT ALTHOUGH THE VIN FELL WITHIN THE RANGE THE PARTS USED TO REPAIR THE DEFECT HAD PART NUMBERS THAT DID NOT INCLUDE THIS VEHICLE, AND DEALERSHIP WAS NOT ALLOWED TO REPAIR THIS VEHICLE, AS PER DAEWOO. *AK

CONSUMER RECEIVED RECALL 0V435700 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

THE CHECK ENGINE LIGHT IS ON. NO DEALERS IN THE AREA TO MAKE REPAIRS. CAM SHAFT SENSOR RECALL 04V357000 DEALER REPAIRED TWO VEHICLES AT NO COST FOR OTHER CONSUMERS. THE CONSUMER WAS TOLD HE WOULD HAVE TO PAY.*AK. CONSUMER WAS CHARGED $77.61 WHILE TWO OTHER CONSUMERS WERE NOT CHARGED FOR THE SAME PROBLEM. *AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER IS UNABLE TO FIND A DAEWOO REPAIR SHOP NOR CONTACT THE NUMBER PROVIDED ON THE DAEWOO RECALL LETTER FOR CUSTOMER SERVICE. *AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER WAS UNABLE TO FIND A DAEWOO REPAIR SHOP NOR CONTACT THE NUMBER PROVIDED ON THE DAEWOO RECALL LETTER FOR CUSTOMER SERVICE. *AK *TC

CONSUMER RECEIVED RECALL 0V457000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CAN NOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

CONSUMER RECEIVED, NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE IN THE AREA OF MASSACHUSETTS. *AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CAN NOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

CONSUMER RECEIVED RECALL 04V35700 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CHECK ENGINE LIGHT IS ON, AND THE VEHICLE SMOKES. THERE IS NO ONE TO MAKE THE REPAIRS. CAM SHAFT SENSOR RECALL 04V357000. *AK