1999 DAEWOO LEGANZA Engine And Engine Cooling Problems

1999 DAEWOO LEGANZA STALLS AND THE ENGINE LIGHT COMES ON.*MR WHILE DRIVING THE VEHICLE STALLED. TIMING BELT BROKE. THE SEAT BELTS DID NOT WORK PROPERLY. *NM

WHILE DRIVING APPROXIMATELY 60 MPH ENGINE BLEW UP. THE CAUSE OF THIS PROBLEM WAS UNDETERMINED.*AK

CONSUMER RECEIVED A RECALL 04V39000 CONCERNING CAMSHAFT POSITION SENSOR. TOOK VEHICLE TO DEALER, AND WAS INFORMED THEY WOULD NOT FIX THE VEHICLE. COMPONENT CODE CAMSHAFT POSITION SENSOR. *AK *BF THE CONSUMER CALLED THE MANUFACTURER AND WAS TOLD THAT THERE WAS NOTHING THEY COULD DO AND THAT THE CONSUMER HAD TO FIX IT HIMSELF. THE CONSUMER HAD THE PART FIXED TA A LOCAL REPAIR FACILITY. *NM

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER REFUSED TO HONOR THE RECALL BECAUSE THE SENSOR NUMBER DID NOT FALL UNDER THE RANGE NUMBERS, AND CONSUMER HAD A CONCERN THAT ENGINE CHECK LIGHT WAS ILLUMINATING WHILE DRIVING. *AK

CAMSHAFT POSITION SENSOR MAY MALFUNCTION, WHICH CAUSE THE ENGINE WARNING LIGHT TO COME ON. *BF THE CONSUMER REQUESTED REIMBURSEMENT. *SC

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WILL NOT HONOR THIS RECALL BECAUSE THE SENSOR LOT # DOES NOT MATCH UP.*AK

THE CONSUMER RECEIVED A RECALL NOTICE(0V4357000) REGARDING THE CAMSHAFT POSITION SENSOR. THERE WAS NO DEALER IN THE AREA TO PERFORM THE RECALL. *JB

CONSUMER RECEIVED RECALL NOTICE 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *AK

DEALERSHIP WAS REFUSING TO HONOR THE CAM SHAFT POSITION SENSOR RECALL 04V357000 BECAUSE THE PART WAS NOT WITHIN THE RECALLED RANGE PART NUMBERS, ALTHOUGH THE SENSOR WAS BAD. RECALL LETTER DIDN'T REFERENCE ANY PART NUMBER RANGE. *AK

THE CONSUMER RECEIVED A RECALL NOTICE(0V4357000) FOR THE CAMSHAFT POSITION SENSOR. THE DEALER WAS NOT IN OPERATION. *JB

THE CONSUMER PAID OUT OF POCKET FOR THE RECALL, SENT THE RECEIPT AND NOTHING HAS BEEN DONE. CAMSHAFT RECALL CAMPAIGN 04V357000. *JB *SC

04 V 357 000/CAMSHAFT POSITION SENSOR/MIL: CONSUMER HAS A CONCERN THAT THEIR VEHICLE "CHECK ENGINE LIGHT" IS ILLUMINATING WHILE DRIVING AND THERE ARE NO AUTHORIZED SERVICE CENTERS IN THE AREA. *JB *SC

THE CONSUMER WAS UNABLE TO HAVE THE CAMSHAFT POSITION SENSOR RECALL 04V357000 PERFORMED BECAUSE THE ONLY DEALERSHIP IN THEIR STATE LISTED ON THE DAEWOO WEBSITE WAS OUT OF BUSINESS. *JB

DEALERSHIP IS CHARGING THE CONSUMER TO PERFORM CAM SHAFT POSITION SENSOR RECALL 04V357000 REPAIRS BECAUSE DEALERSHIP WAS NOT REIMBURSED BY THE MANUFACTURER. *AK

THE CHECK ENGINE LIGHT IS ON. POSSIBLE OUT OF POCKET EXPENSE FOR THE REPAIR. RECALL 04V357000 FOR CAM SHAFT SENSOR. *AK

DEALERSHIP WAS UNABLE TO PERFORM CAM SHAFT POSITION SENSOR RECALL 04V357000 WITHIN A REASONABLE TIME FRAME BECAUSE THE MANUFACTURER WAS ONLY SENDING THEM A LIMITED AMOUNT OF RECALL PARTS.*AK

CONSUMER RECEIVED A RECALL 04V357000 FOR THE CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER REPLACED CAM SHAFT POSITION SENSOR RECALL 04V357000. THERE WAS NO ONE TO REIMBURSE HIM FOR THE COST. *AK

CONSUMER RECEIVED RECALL 04V 357000 FOR THE CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK *TC

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK *TC

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CANNOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR, CONSUMER CANNOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. THE CONSUMER CANNOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK THERE WAS A BURNING SMELL COMING FROM UNDER THE HOOD AND SMOKE COULD SOMETIMES BE SEEN, THE CHECK ENGINE LIGHT APPEARED, THE HORN STAYED ON AND WOULD NOT GO OFF, WHEN THE VEHICLE WAS STARTED IT WOULD IDLE HIGH THEN GO BACK DOWN, AND THE VEHICLE HAD RUN HOT. *SC

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CONTACTED SEVERAL DEALERS IN THEIR AREA. ALL THE DEALERS INFORMED CONSUMER OF NO PARTS AVAILABLE UNTIL 2-3 WEEKS.*AK

CONSUMER RECEIVED RECALL 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE IN THE RADIUS OF 50 MILES. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR FROM THE MANUFACTURER AND WENT TO THE DEALER TO HAVE THE VEHICLE SERVICED. THE SERVICE MANAGER TOLD CONSUMER THAT SHE MUST PAY $107.95 FOR ANOTHER PART BECAUSE THAT WAS NOT THE PART OF THE RECALL. SERVICE MANAGER WAS NOT GOING INTO DETAIL AS TO WHY THIS FEE WAS TO BE PAID. *AK

CONSUMER WAS AT DEALERSHIP FOR RECALL REPAIRS ON THE CAM SHAFT. RECALL 04V357000. WAS INFORMED BY MECHANIC NOT REPAIRING RECALLS ON VEHICLES. WILL ONLY REPAIR 500 VEHICLES THROUGHOUT LOUISIANA. CONSUMER WOULD HAVE TO PAY FOR RECALL REPAIRS. *AK

CONSUMER RECEIVED RECALL 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CAN NOT FIND A DEALERSHIP NOR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. *AK

THE CHECK ENGINE LIGHT IS ON. THE CAM SHAFT POSITION SENSOR RECALL 04V357000. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE TO PERFORM RECALL REPAIRS. *AK

THE CONSUMER WAS CONCERNED THAT THE RECALL LETTER STATED THE REPAIR WAS AT NO COST TO THE OWNER, HOWEVER THE MANUFACTURER DID NOT ANSWER THE PHONE NUMBER PROVIDED ON THE RECALL LETTER. CAMSHAFT SENOR, 04V357000. *JB

THE CONSUMER WAS UNABLE TO FIND A DEALERSHIP OR CONTACT THE NUMBER PROVIDED ON THE RECALL LETTER FOR DAEWOO CUSTOMER SERVICE. RECALL#04V357000 CAMSHAFT POSITION SENSOR. PLEASE PROVIDE MORE INFORMATION. *JB

NHTSA RECALL 04V357000 SUBJECT: CAMSHAFT POSITION SENSOR. THE CONSUMER WAS UNABLE TO LOCATE A DEALER TO HONOR THE RECALL. *JB

THE CONSUMER RECEIVED, NHTSA RECALL CAMPAIGN LETTER #04V357000 REGARDING THE CAMSHAFT POSITION SENSOR. THE DEALERSHIP INDICATED TO THE CONSUMER THEY WILL CHARGE FOR THE RECALL. *JB

THE CONSUMER RECEIVED, NHTSA RECALL 04V357000 REGARDING THE CRANK WAS SHAFT POSITION SENSOR. NO DEALERSHIP AVAILABLE IN THAT AREA, THE ONLY TWO DEALERS THAT WERE IN THAT AREA ALREADY CLOSED THE BUSINESS. THE PHONE PROVIDED IN THE LETTER WAS ALWAYS BUSY.*AK

ENGINE LIGHT WAS ON. THE WERE NO DEALERS TO MAKE THE REPAIRS. THE ENGINE WAS REPLACED TWICE. CAMSHAFT SENSOR RECALL 04V357000. *AK

CHECK ENGINE LIGHT CAME ON, THEN VEHICLE STOPPED RUNNING. CAM SHAFT SENSOR WAS AFFECTING THE VEHICLE. RECALL 04V357000. *AK

CONSUMER RECEIVED RECALL NOTICE CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

THE ENGINE WENT OUT. THEREWER NO DEALERS TO REPAIR THE ENGINE. CAM SHAFT SENSOR RECALL 04V357000. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *AK

THE CHECK ENGINE LIGHT CAME ON. VEHICLE WAS IN THE REPAIR SHOP FOR AN ENGINE REPLACEMENT. MANUFACTURER'S RECALL WAS NOT HONORED BY THE DEALER. CAMSHAFT SENSOR RECALL 04V357000. *AK

ENGINE WAS REPLACED, AND THERE WAS NO WAY TO GET THE EXPENSE BACK. CAMSHAFT SENSOR RECALL 04V357000. *AK

THE CHECK ENGINE LIGHT WAS ON. NO DEALER TO REPAIR THE CAM SHAFT SENSOR RECALL 04V357000. *AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP AVAILABLE IN THIS AREA. THE PHONE PROVIDED IN THE LETTER WAS NOT WORKING. *AK

CONSUMER RECEIVED RECALL NOTICE 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL NOTICE 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK