2022 CAN-AM RYKER Engine Problems

I had a VSS Fault and engine power cut off while coming in a left turn. Rear tire became wobbly and almost threw me off. Bike went to limp mode and slowed down. Had engine codes C006C and C0063 which are common problems with the steering and engine going to limp mode

Rear uncontrollable shaking, swaying on slow low 40mph gradual cornering. Caused VSS Limp mode fault. Codes C0063 and C006C. Almost lost control of the Ryker, Seems traction control or the yaw sensor is intermittently active when cornering. This time it went into limp mode.

This motorcycle continues to go into "Limp Mode". This has happened now two times with no explanation from the manufacture as to why. The bike will lose engine power and immediately drop to speeds no higher than 55mph. This was advised to dealer and they were very familiar with this, and initially told me the repairs were denied by BRP, but that they covered the issue and fixed it. Less than 1 week later, the same thing happened. The check engine light comes on and the gauges read VSS Fault, Limp Mode. This is very unsafe as there is no explanation as to why this happens and engine power is loss at any given moment. I fear riding the bike on the freeway at high speeds and this happening and potentially causing me to be hit by another vehicle from the immediate loss of power. This is a well known...