Technical Service Bulletin TSB 24-2078 — 2021 FORD ESCAPE HYBRID
POWER TRAIN
Bulletin Details
| TSB ID | TSB 24-2078 |
| Manufacturer | |
| Vehicle | 2021 FORD ESCAPE HYBRID |
| Component | POWER TRAIN |
| Communication Date |
Bulletin Summary
This article supersedes TSB 23-2244 to add 2024 model year. Some 2020-2024 Escape hybrid vehicles equipped with a 2.5L (FHEV) full hybrid electric vehicle powertrain and 4-wheel drive (4WD) may exhibit a grinding or rubbing noise while braking at or below 10 mph (16 km/h) from the front of the vehicle. This may be due to an inadequate gap between the driveshaft and the heat shield. To correct this condition, follow the Service Procedure to diagnose and position the heat shield away from the driveshaft.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2021 FORD ESCAPE HYBRID
TSB 23-2335
POWER TRAIN
TSB 23-2244
POWER TRAIN:DRIVELINE:DRIVESHAFT
TSB 22-2147
POWER TRAIN:AUTOMATIC TRANSMISSION
TSB 22-2147
ELECTRICAL SYSTEM:SOFTWARE
TSB 22-2127
EQUIPMENT
SSM 50325
EQUIPMENT
SSM 50255
STRUCTURE:BODY:BUMPERS:ACTIVE SHUTTERS/GRILL
SSM 50168
UNKNOWN OR OTHER
SSM 50161
ENGINE AND ENGINE COOLING
TSB 21-2271
ELECTRICAL SYSTEM