Technical Service Bulletin TSB 22-2271 — 2018 FORD TRANSIT
POWER TRAIN
Bulletin Details
| TSB ID | TSB 22-2271 |
| Manufacturer | |
| Vehicle | 2018 FORD TRANSIT |
| Component | POWER TRAIN |
| Communication Date |
Bulletin Summary
This article supersedes TSB 22-2175 to update the Issue, Action, and Service Procedure. Some 2015-2022 Transit vehicles equipped with rear wheel drive (RWD), single rear wheel (only), and U-joints at the transmission flange and rear driveshaft may experience a boom/hum/moan noise from the rear while driving. This noise is most noticeable at highway speeds: 112-121 km/h (70-75 mph) for 4.10 axle ratio 121-128 km/h (75-80 mph) for 3.73 axle ratio 136-145 km/h (85-90 mph) for 3.31 axle ratio The noise may also be present to a lesser degree at roughly half of the noted speeds. This may be due to a 2nd order driveline frequency transmitted through the rear driveshaft, rear axle and into the body through the leaf springs. To correct the condition, follow the Service Procedure to install a driveshaft torsional damper. NOTE: The torsional damper will not resolve a vibration.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2018 FORD TRANSIT
SSM 53323
UNKNOWN OR OTHER
23N01
ENGINE AND ENGINE COOLING
23N01
POWER TRAIN
SSM 50588
EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
SSM 49483
POWER TRAIN
TSB 20-2214
EQUIPMENT
TSB 20-2214
POWER TRAIN
SSM 48633
POWER TRAIN
SSM 48543
ENGINE AND ENGINE COOLING
SSM 48018
VISIBILITY:POWER WINDOW DEVICES AND CONTROLS