Technical Service Bulletin TSB 22-2127 — 2020 FORD ESCAPE HYBRID
ENGINE AND ENGINE COOLING:COOLING SYSTEM
Bulletin Details
| TSB ID | TSB 22-2127 |
| Manufacturer | |
| Vehicle | 2020 FORD ESCAPE HYBRID |
| Component | ENGINE AND ENGINE COOLING:COOLING SYSTEM |
| Communication Date |
Bulletin Summary
Some 2020-2022 Escape plug-in hybrid electric vehicle (PHEV) and 2021-2022 Corsair PHEV vehicles built on or before 3-Mar-2022 may exhibit an illuminated malfunction indicator lamp (MIL) and/or engine coolant over temperature warning message with Diagnostic Trouble Code (DTC) P2183 stored in the powertrain control module (PCM). DTC P26C1 may also be present due to DTC P2183 setting. This condition occurs when the vehicle is driven with the cabin coolant heater active and after an engine long soak the DTC P2183 will incorrectly set at next key on. This may be due to the soak timer feature in the PCM that miscalculates the heater off soak timer. To correct the condition, follow the Service Procedure to reprogram various modules starting with the PCM.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2020 FORD ESCAPE HYBRID
TSB 22-2170
ENGINE AND ENGINE COOLING
TSB 22-2169
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
SSM 49780
EQUIPMENT
SSM 49780
EQUIPMENT:APPLIANCE:AIR CONDITIONER
TSB 21-2080
ELECTRICAL SYSTEM