Technical Service Bulletin TSB 20-2166 — 2019 FORD EXPEDITION
POWER TRAIN
Bulletin Details
| TSB ID | TSB 20-2166 |
| Manufacturer | |
| Vehicle | 2019 FORD EXPEDITION |
| Component | POWER TRAIN |
| Communication Date |
Bulletin Summary
Some 2018-2019 Expedition/Navigator vehicles built on or before 8-Apr-2019 equipped with a 3.5L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. This may be due to a worn variable cam timing (VCT) unit. To correct the condition, follow the Service Procedure steps to replace the VCT units and update the powertrain control module (PCM) calibration with revised VCT parameters.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2019 FORD EXPEDITION
TSB 25-2132
UNKNOWN OR OTHER
24E13
UNKNOWN OR OTHER
TSB 24-2046
ELECTRICAL SYSTEM
SSM 51617
EXTERIOR LIGHTING
TSB 23-2123
ELECTRICAL SYSTEM
21N03-S4
ENGINE AND ENGINE COOLING
SSM 50045
ELECTRICAL SYSTEM
TSB 20-2421
STRUCTURE:BODY:DOOR
TSB 20-2253
EQUIPMENT
TSB 20-2166
ENGINE AND ENGINE COOLING