Technical Service Bulletin TSB 19-2287 — 2013 FORD ESCAPE
ENGINE AND ENGINE COOLING
Bulletin Details
| TSB ID | TSB 19-2287 |
| Manufacturer | |
| Vehicle | 2013 FORD ESCAPE |
| Component | ENGINE AND ENGINE COOLING |
| Communication Date |
Bulletin Summary
Some 2013-2016 Escape vehicles equipped with a 1.6L EcoBoost engine may exhibit a lack of cooling caused by the A/C inlet line breaking at the compressor. This may be due to the oil cooler coolant lines exerting excess pressure on the A/C inlet line. When replacing the A/C inlet line, a support clip for the oil cooler coolant line should be installed to prevent contacting the A/C inlet line. To correct the condition, follow the Service Procedure steps to replace the A/C inlet line and adjust the gap between the A/C inlet line and the CAC hose.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2013 FORD ESCAPE
TSB 19-2100
POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER
SSM 47858
SUSPENSION:REAR
SSM 46937
ENGINE AND ENGINE COOLING
SSM 46327
ENGINE
SSM 46157
VISIBILITY:WINDSHIELD
16-0031
ELECTRICAL SYSTEM
16-0052
ELECTRICAL SYSTEM:SOFTWARE
16-0052
ENGINE
TSB160033
VISIBILITY:REARVIEW MIRRORS/DEVICES
TSB150162
POWER TRAIN