Technical Service Bulletin SSM 48279 — 2019 LINCOLN MKC
ELECTRICAL SYSTEM
Bulletin Details
| TSB ID | SSM 48279 |
| Manufacturer | |
| Vehicle | 2019 LINCOLN MKC |
| Component | ELECTRICAL SYSTEM |
| Communication Date |
Bulletin Summary
Some 2018-2019 Ford and Lincoln vehicles equipped with a telematics control unit (TCU) may exhibit a persistent message in the Ford Pass/Lincoln Way mobile app advising, Your vehicles software is being updated. Vehicle controls will be unavailable for about 10 minutes while this update takes place. This may be due to the TCU still in factory mode. Using the appropriate Ford diagnostic scan tool, check the TCU_AUTHSTATE PID status showing Factory Mode. To correct this condition, perform programmable module installation (PMI) on the telematics control unit (TCU). Once PMI is completed, ensure the TCU_AUTHSTATE PID in service tool no longer displays Factory Mode. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM) section 415-00. For claiming, use causal part 14G229.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2019 LINCOLN MKC
SSM 51099
ELECTRICAL SYSTEM
SSM 51099
SERVICE BRAKES, HYDRAULIC
SSM 48506
ELECTRICAL SYSTEM
TSB 19-2265
ELECTRICAL SYSTEM
SSM 48083
STEERING:HYDRAULIC POWER ASSIST SYSTEM
SSM 48083
ELECTRICAL SYSTEM
SSM 48083
ELECTRONIC STABILITY CONTROL (ESC)
SSM 48083
SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:ABS WARNING LIGHT
SSM 48046
ENGINE AND ENGINE COOLING
SSM 47996
EQUIPMENT:APPLIANCE:AIR CONDITIONER