Technical Service Bulletin SSM 47083 — 2018 LINCOLN MKZ
STEERING: STEERING WHEEL/HANDLE BAR
Bulletin Details
| TSB ID | SSM 47083 |
| Manufacturer | |
| Vehicle | 2018 LINCOLN MKZ |
| Component | STEERING: STEERING WHEEL/HANDLE BAR |
| Communication Date |
Bulletin Summary
Some 2017-2018 MKZ vehicle built on or before 10-Oct-2017 may exhibit a steering wheel that does not travel to the full up position when the easy entry/exit feature is enabled. Reprogram the DSM using Integrated Diagnostic System (IDS) or Ford J2534 Diagnostic Software (FJDS) release 108.03 or higher. Perform a driver seat module (DSM) reset. Select Toolbox > Body > Service Functions > DSM Reset. Next, program the DSM using as-built. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 14C708 and applicable labor operations in section 10 of the service labor time standards (SLTS) manual.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2018 LINCOLN MKZ
SSM 47971
ENGINE AND ENGINE COOLING
SSM 47737
EQUIPMENT
SSM 47635
ELECTRICAL SYSTEM
18B24
EQUIPMENT
18B24
ELECTRICAL SYSTEM:12V/24V/48V BATTERY
SSM 47380
EQUIPMENT ADAPTIVE/MOBILITY
SSM 47204
ENGINE AND ENGINE COOLING
SSM 47129
ELECTRICAL SYSTEM
SSM 47090
FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES
17-2225
VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR