Technical Service Bulletin NTB25-064 — 2024 NISSAN ROGUE
ENGINE
Bulletin Details
| TSB ID | NTB25-064 |
| Manufacturer | |
| Vehicle | 2024 NISSAN ROGUE |
| Component | ENGINE |
| Communication Date |
Bulletin Summary
MIL ON WITH DTCS P05D8 AND P05D9 STORED IN THE ECM IF YOU CONFIRM The MIL is ON with DTCs P05D8 for “PCV Regulator Valve Control Circuit/Open” and P05D9 for “PCV Regulator Valve Control Circuit Low” stored in the ECM, AND The wiring harness, for wiring harness connector F130, is severed at the Crank Case Ventilation Valve under the Engine Cover. ACTION Follow the SERVICE PROCEDURE starting on page 3 to repair the wiring harness. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2024 NISSAN ROGUE
NTB25-030A
ELECTRICAL SYSTEM
NTB25-003
ENGINE
NTB25-001
VEHICLE SPEED CONTROL
NTB24-043
ELECTRICAL SYSTEM
NTB24-043
FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
NTB20-074B
ELECTRICAL SYSTEM
NTB23-051B
POWER TRAIN
NTB19-042E
ELECTRICAL SYSTEM
NTB19-042E
FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING