Technical Service Bulletin NTB25-001 — 2024 NISSAN ROGUE
VEHICLE SPEED CONTROL
Bulletin Details
| TSB ID | NTB25-001 |
| Manufacturer | |
| Vehicle | 2024 NISSAN ROGUE |
| Component | VEHICLE SPEED CONTROL |
| Communication Date |
Bulletin Summary
CRUISE CONTROL/PROPILOT STOPS WORKING IF YOU CONFIRM The customer states that while driving on an unobstructed road, and on a clear day without any rain, snow, or direct sunlight, the Cruise Control/ProPilot stopped working, AND The Automatic Emergency Braking/Forward Emergency Braking light (AEB/FEB) flashed while the “Forward Driving Aids Disabled” message was displayed in the combination meter, AND DTC C2582-97 for “Distance sensor” is stored as PAST. ACTION Follow the SERVICE PROCEDURE in this bulletin to: 1. Confirm the current LASER/RADAR part number. 2. Reprogram the LASER/RADAR, if applicable. 3. Erase the DTCs. 4. Perform Distance Sensor Alignment. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2024 NISSAN ROGUE
NTB25-064
ENGINE
NTB25-030A
ELECTRICAL SYSTEM
NTB25-003
ENGINE
NTB24-043
ELECTRICAL SYSTEM
NTB24-043
FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
NTB20-074B
ELECTRICAL SYSTEM
NTB23-051B
POWER TRAIN
NTB19-042E
ELECTRICAL SYSTEM
NTB19-042E
FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING