Technical Service Bulletin A011255 2030192- — 2007 AUDI A6
ENGINE AND ENGINE COOLING
Bulletin Details
| TSB ID | A011255 2030192- |
| Manufacturer | |
| Vehicle | 2007 AUDI A6 |
| Component | ENGINE AND ENGINE COOLING |
| Communication Date |
Bulletin Summary
MIL light on. P2015 sender of intake manifold flap position/air flow control, implausible signal P2020 sender of intake manifold flap position, intake manifold flap 2, implausible signal. Engine may have reduced performance without significant loss of power or stalling. Check service history to see if the improved ? B? suffix V157 Intake Flap motor has already been installed previously; if yes, only replace the potentiometer seals as described below. The fault entry is made because a linkage of the intake manifold flap adjustment sticks. This is caused by deformed oil seal behind the potentiometers.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2007 AUDI A6
DC_AudiRingsV12
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
DC_Rings_VOL10
AIR BAGS
SM F-2018
AIR BAGS
A3715592028279-3
ELECTRICAL SYSTEM
01149620182608
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
A431314 2018765-
SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION SYSTEM
A011376 2018260-
ELECTRICAL SYSTEM:WIRING
SB-01-12-57
ENGINE
0112552030192
ENGINE AND ENGINE COOLING
A171232 2018550-
ENGINE