Technical Service Bulletin 22-GI-006G — 2014 HYUNDAI GENESIS COUPE
EQUIPMENT:OTHER:LABELS
Bulletin Details
| TSB ID | 22-GI-006G |
| Manufacturer | |
| Vehicle | 2014 HYUNDAI GENESIS COUPE |
| Component | EQUIPMENT:OTHER:LABELS |
| Communication Date |
Bulletin Summary
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) sets a threshold for correcting load capacity information indicated on tire placards when the vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of the Gross Vehicle Weight Rating or 100 pounds. If the total added weight exceeds the lesser of the limit, a label (See Figure 1) must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard. NOTE: Effective immediately, all ports will stop the installation of the Load Capacity Label when there are no port accessories installed.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2014 HYUNDAI GENESIS COUPE
23-01-014H-5
POWER TRAIN
5NP-P4Q3W-11
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
14-BE-016
ELECTRICAL SYSTEM:SOFTWARE
14-01-029
ELECTRICAL SYSTEM:SOFTWARE