Technical Service Bulletin 09-006-24 — 2019 MAZDA CX-9
LATCHES/LOCKS/LINKAGES
Bulletin Details
| TSB ID | 09-006-24 |
| Manufacturer | |
| Vehicle | 2019 MAZDA CX-9 |
| Component | LATCHES/LOCKS/LINKAGES |
| Communication Date |
Bulletin Summary
Some vehicles may exhibit a creaking or clacking noise when operating the power lift gate (PLG). The noise may be caused by the following: Creaking noise: Dust and dirt accumulates on the sealing portion of the PLG drive unit, reducing sealing performance. Snow and water may enter the PLG drive unit. Humidity then causes rust inside of the unit, resulting in noise. Clacking noise: Since the grease applied on the spring end of the PLG drive unit is insufficient, interference noise is caused when the spring end interferes with the spring guide. The noise has been eliminated by the following mass-production changes: Creaking noise: The sealing structure has been modified to prevent dust/dirt from entering the unit. Clacking noise: The production procedure of the PLG drive unit has been modified to apply sufficient grease to spring end.
About Technical Service Bulletins
A Technical Service Bulletin (TSB) is a document issued by a vehicle manufacturer to its dealers, describing a known issue with a specific vehicle or set of vehicles and the recommended procedure to fix it. Unlike recalls, TSBs are not mandatory and are typically only performed if an owner reports the related issue. However, TSBs can be an indicator of common problems with a vehicle.
Other TSBs for the 2019 MAZDA CX-9
SA-050-24
UNKNOWN OR OTHER
09-035-24
SEATS
06-001-24
STEERING
SA-033-23
ELECTRICAL SYSTEM
SA-016-23
EQUIPMENT:ELECTRICAL
01-002-23a
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
09-011-23
UNKNOWN OR OTHER
01-002-23
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
01-001-23
ENGINE AND ENGINE COOLING
SA-001/22
BACK OVER PREVENTION