NHTSA Complaint #11711257 — 2018 JEEP WRANGLER

On January 14, 2026, my 2018 Jeep Wrangler JK Sport (3.6L) with approximately 134,099 miles was inspected at Cox’s Automotive & Repair Inc. due to a check engine light and rough engine operation. During diagnostic testing, multiple fault codes were identified, including P000A (camshaft position slow response), P0300 In addition to the diagnostic findings, I contacted and visited multiple automotive repair facilities regarding this issue. Each shop advised that they have previously serviced 2018 Jeep Wrangler JK models with the same 3.6L engine presenting identical symptoms and diagnostic codes, including timing correlation errors, misfires, and internal engine damage. Several repair facilities indicated that they have had the same make and model in their shops for the same failure, including vehicles with significantly lower mileage, with one reported case occurring at approximately 7,000 miles. Based on consistent feedback from multiple independent repair facilities, this condition appears to be a known and recurring mechanical issue associated with this vehicle model, rather than damage caused by misuse, neglect, or owner fault. (random/multiple cylinder misfires), P0017 and P0019 (camshaft/crankshaft timing correlation errors). Upon removal of the oil filter, metal debris was found in the oil filter cartridge, indicating possible internal engine damage. Based on these findings, the repair facility recommended engine replacement or major engine repair.