NHTSA Complaint #11690570 — 2007 MITSUBISHI ECLIPSE

With my vehicle the brakes go straight to the floor. I took it to the mitsubishi dealership closest to me (Bobmills mitsubishi Jacksonville Nc). When I got there i told them what was going on, and if you bleed the brakes they worked fine for 3 or 4 days but after that the brakes would just go to the floor again. They said they bleed the brakes to replace the fluid and then tested the ABS module for a recall and said it was fine but I had a collapsed brake line in the rear. I replaced all the brake lines on the vehicle and did a complete bleed again to remove any air. The brakes now go all the way to the floor again. I was trying to bleed them just to see if I could get some pressure, but 3 of the lines aren't getting pressure. I decided to check and bleed at the master cylinder, I had plenty of pressure coming out so I know that's good. Then I checked the bleed pressure at the ABS module thats on the recall and I am only getting pressure from the drivers front tire, the other 3 are not giving pressure at all, even if you pump the brakes while they are open. So I know the cylinders in that ABS module are bad. So I called the dealership again and they are refusing to do it because they said they don't work on vehicles that old.