NHTSA Complaint #11611948 — 2009 SUBARU LEGACY

Under Subaru campaign WQK47, which supersedes an earlier campaign, 05-09 Legacy/Outback and other models are known to undergo accelerated brake line corrosion due to sub-par materials and design. Subaru of America's "fix" for this issue is to inspect the lines: if the lines are compromised, they replace them. If the lines are corroded but not yet compromised, the lines are coated with an anti-corrosion wax. This wax washes off the car and is ineffective. Subaru performed this recall work insufficiently on my vehicle, failing to identify the severity of the corrosion. They coated the lines, called it "fixed", and the brake lines later ruptured under normal driving conditions. This caused a highway near-miss at speed that could have impacted everyone on the road. Multiple Subaru dealerships in Connecticut have refused to re-inspect and repair the vehicle under the recall campaign, despite it being a known critical safety concern, and despite knowledge that the original parts and anti-corrosion application are sub-par. They insist that because the ineffective recall campaign was already "completed", they bear no further responsibility for the design compromises and sub-par materials that are the root cause of this issue. Additionally: Under Subaru bulletin 12-197-16R the dashboard of 05-09 Subaru Legacy/Outback models is known to become sticky and melt. While this might initially be considered a cosmetic issue, the melted surface is DRAMATICALLY reflective. The hump over the gauge cluster melts first, causing a huge, intense sun glare reflection in the windscreen directly ahead of the driver. I own two 05-09 Subaru Legacies; this issue is present in both. Subaru of America has rejected my replacement claims on both cars because the cutoff date for their open recall has expired. This is a major and constantly worsening safety issue that severely limits driver visibility. Because it developed slowly, it was not a safety concern until after closure of the recall.