NHTSA Complaint #11609999 — 2018 HONDA PILOT

The original manufacturer windshield and the adhesive holding it to the body of the vehicle was improperly installed by the manufacturer allowing water to leak into the A-pillar of the driver's side down into the lower dash and foot well. Moisture and degradation of the factory installed windshield adhesive can cause electrical faults, mold, a loose windshield, and other issues that can disable the vehicle and/or cause bodily harm. The dealer noted and advised about the possibility of the adhesive degradation before the vehicle was inspected, which confirms this is a common issue with this vehicle. Upon inspection, they advised that the windshield adhesive was the issue. The issues/symptoms presented themselves during recent and prolonged rain events at which time it was reported to the nearest authorized dealer. The local dealer claims a crack in the windshield as the cause of the problems. Unfortunately, there are no cracks in the area where the leak is originating from. The vehicle leaks from the upper driver's side corner of the windshield, with the crack noted being on the lower mid section of the windshield. Water would not run up into the corner from where the adhesive leaks.