NHTSA Complaint #11569727 — 2016 MINI COOPER

* Component/ system that has malfunctioned and failed - The Driver side tail light circuit board and pig tail malfunctioned. The connector has corroded and the plastic plug housing looks melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal the reverse light and the brake light inoperable on the effected side. YES, MY VEHICLE IS AVAILABLE FOR INSPECTION AT ANY TIME. *A driver behind an affected vehicle could be confused which could increase the risk of a crash. *The vehicle has been inspected by a licensed MINI Dealership. They failed to report two of the three nonworking rear lights that have failed due to the connector becoming corroded. The corroded plastic plug housing becomes melted on the earth / brown wire. This in return damages the the ground connection for the tail light rendering the turn signal and brake light inoperable on the effected side. In this case it is the rear driver side. *There was/ is no warning until long after the first second and/ or third rear light(S) were not operable. Intermittently (sometimes) a warning will popup when turning on the vehicle. The vehicle will not warn the driver about and and / or all three lights each and every time the vehicle is turned on. ALSO while the vehicle is in drive or in reverse , the driver will not have any warning what so ever that the three lights 1. The driver side rear break light 2. The driver side rear reverse light 3. The driver side rear turn signal are not working due to a malfunction. * note that there is a very strong burnt/melted smell that comes from the connector as well. I could smell it on my fingers after removing the connector so I could check the rear bulbs for replacement. Please note the 1st photo-this is how the dealership left my connector after their assessment. Additional photos are of the connector/ pig tail/ circuit board corrosion. Intermittent warrnings for some of the nonworking lights.