NHTSA Complaint #11557689 — 2016 ACURA MDX

My engine light enabled & my car slowed < 30 mph while driving on a frwy on 2/4/23. I exited & turned the engine off. It was late at night in a rural area, so I waited a bit & turned the car back on. Engine light was no longer on, so I continued to my destination (GA). On 2/5/23, while driving on the frwy, my engine light enabled & my car quickly slowed to < 20 mph. The light stayed on & my car had little power (limped along). After a few hours, there was no change & my car was not drivable. I got a hotel for the night & took my car to the nearest Honda dealer on 2/6/23. The service dept told me my car needed a new engine because the bearing or rod had gone bad (terminology may be slightly off). My car had UNDER 100K miles & I was told it needed a new engine. The Honda serviceman told me he had 3 other vehicles in house with the same issue & he wouldn’t be able to get to my car for a while. I called the nearest Acura dealer & spoke with a serviceman there, he told me to ask the Honda serviceman to clear engine code & slowly drive the car to the Acura dealership. The Honda serviceman warned me that my car may not make it to the Acura dealership but might if slowly. He cleared the code & I slowly drove to the Acura dealership. I reached the Acura dealership shortly before closing time on 2/6/23, I dropped my car off with the service dept & got a hotel room. I was contacted the following day, 2/7/23, by the Acura serviceman & he confirmed a new engine was required. There’s now a recall on the same issue my car experienced for same make, model & year, however Acura states my VIN was not affected. It is highly unlikely that my same make, model & year vehicle that experienced the exact issue for the recall is simply coincidence.