NHTSA Complaint #11495877 — 2022 RAM PROMASTER

When using Adaptive Cruise Control (ACC) with Traffic Sigh Assist (TSA) engaged (the default) on an interstate or other high speed road - for example the current highway speed limit is 65 and the ACC maximum speed is also set at 65 MPH, the TSA (wrongly) detects a much lower speed limit, say 25 MPH, the system flashes a warning AND AUTOMATICALLY APPLIES THE BRAKES without allowing the driver to respond to the warning message. According to the user manual, what is supposed to happen, is that the TSA warning message displayed on the dash says "new speed limit detected" and SUGGESTS that the driver can accept the detected speed limit as the new ACC maximum speed by pressing the RES resume button on the the steering wheel. If the driver does not respond, the ACC max speed stays as set. This is seriously dangerous! imagine going 65 MPH in heavy traffic and suddenly, unexpectedly the brakes are applied so violently that the vehicle skids and swerves out of its lane. This has happened multiple times to me. I believe this is caused by 2 problems: 1 The TSA wrongly detects a significantly lower speed limit sign. I don't know for sure but I guess it might "see" a sign on an exit ramp or parallel service road. 2 The vehicle automatically sets the new TSA speed as the ACC top speed and automatically applies the bakes instead of allowing the driver the option of setting the new speed limit by pressing the RES button. I have spent the last week trying to report this to the RAM dealer and Customer Care but they don't seem to be very responsive. They say I should schedule and pay for a diagnostic session but they have no openings until mid-January. Even if I took it in, I doubt the diagnostics would show anything because this is most likely a software issue. It would also be difficult to duplicate on local roads. I do know another person who has reported this same problem on YouTube and is able to recreate it as detecting a speed limit sign on a parallel service road.