NHTSA Complaint #11488085 — 2018 TESLA MODEL 3

https://www.tesla.com/support/home-charging-installation/wall-connector The strain relief on the cable that is used to charge the vehicle became loose exposing dangerous high voltage 240v (40A) bare wires inside where the consumer holds it to charge the vehicle. If touched by anyone while charging, would likely cause electrocution and possible death. As the vehicle takes hours to charge outside, not only is the driver and passengers at risk but passerby's including young children. This could happen during clear, dry conditions and exacerbated by wet conditions. The manufacturer, Tesla, responded to my complaint by telling me the only remedy is for me to buy a new charging unit at a cost of $500 plus a few hours of electrician labor. There was no mention of a replacement part (strain relief/handle) other than purchasing the entire system and paying an electrician to replace it. There were no prior symptoms (no scratches, no cracks, no physical damage, etc..) which leads me to believe that this is a manufacturing defect and a serious live threatening one. Furthermore, the Tesla support team wrote on 7/16/2022: "Thank you for reaching out to the Tesla Wall Connector Support team. "he crack shouldn't stop the unit from charging. Your unit is out of warranty. If you would like to purchase the newest Wall Connector while it's on sale for $400 instead of $500, I have provided the link. We do recommend a certified electrician install the Gen 3. https://shop.tesla.com/product/wall-connector." This implies that the wall charger can be used to charge the vehicle and ignores the DANGEROUS ELECTRICAL HAZARD present which is totally unacceptable.