2015 YAMAHA FJ-09 Power Train Problems

WHILE SITTING IN TRAFFIC AT A STOP LIGHT I FELT A POP IN MY LEFT HAND AND THE CLUTCH GAINED AN EXTRA HALF INCH OF SLACK. THE MOTORCYCLE BEGAN TRYING TO LURCH FORWARD FROM THE NOW SLIPPING CLUTCH. THE CLUTCH CABLE HAD BEGUN TO BREAK. I MANAGED TO WRESTLE THE BIKE OUT OF TRAFFIC TO THE SIDE OF THE ROAD WITHOUT INJURING MYSELF BUT ALMOST DROPPED THE MOTORCYCLE NUMEROUS TIMES. I WAS ABLE TO LIMP THE MOTORCYCLE HOME AND INVESTIGATE THE ISSUE FURTHER. I HAD READ ONLINE OF MANY OTHERS HAVING SIMILAR ISSUES WITH THE CLUTCH CABLE BREAKING. I ATTEMPTED TO ADJUST THE CABLE BUT IT WOULD NOT COME INTO SPEC. I REALIZED I WOULD NEED A NEW CABLE SO I TOOK A RAZOR BLADE AND DISSECTED THE CLUTCH CABLE. UPON OPENING IT, 90% OF THE CABLE HAD TORN AND THERE WAS ONLY 2 STEEL STRANDS FROM A COMPLETE BREAK....

FACTORY SPECIFICATION FOR FINAL DRIVE CHAIN TENSION ON THE FJ-09 IS UNUSUALLY TIGHT AT 5MM - 15MM. I HAVE OWNED MORE THAN 40 MOTORCYCLES AND NONE OF THEM SPECIFIED SUCH A TIGHT TENSION. MOST MFGRS, INCL. EVERY YAMAHA I'VE EVER OWNED, SPECIFY 25MM - 35MM "SLACK" IN THE CHAIN FROM FULL TIGHT AND WHEN MEASURED WITH BIKE ON CENTERSTAND. HAVING TOO LITTLE SLACK CAN RESULT IN CATASTROPHIC FAILURE OF THE DRIVE CHAIN AND/OR THE REAR SPROCKET AND/OR THE FRONT SPROCKET. IF ANY OF THESE PARTS CATASTROPHICALLY FAIL WHILE THE VEHICLE IS IN MOTION, IT COULD RESULT IN AN ACCIDENT, INJURY, AND/OR DEATH. YAMAHA SHOULD REVISE THEIR SPECIFICATION AND OFFER FREE ADJUSTMENT AT THE DEALERSHIP, A 10 MINUTE JOB